Content |
PR-52
50W - This set contains 2 pcs. White
2-way passive plastic vented speaker system,
including mounting/hanging brackets
Woofer: 5.25“, 16 Ohm, Rubber Edge
Tweeter: 12,6 mm Mylar Dome Tweeter
Nominal Impedance: 16 Ohm
Power Handling: 50 Watt Continuous
Freq. Range (-10 dB): 50 – 20.000 Hz
Dimensions (LxWxH): 185 x 175 x 250 mm
Net Weight: 2,5 kg
|
Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
|
SR-H3S Line Array Loudspeaker; Bass-reflex type; Continuous program: 360W; Sensitivity: 92dB; Directivity: Horizontal: 90°, Vertical: 20°
Specifications SR-H3S
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360W
Rated Impedance 8Ω
Sensitivity (1W,1m equivalent measured at 4m) 92dB
Frequency Response 90 – 17,000Hz (when using optional Digital processor)
Directivity Angle Horizontal: 90°, Vertical: 20° (within the range of speaker height)
Speaker Component 7cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish
Enclosure MDF, white, urethane paint
Front grille Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1177.2 (H) × 17 (D)mm (3.31" x 46.35" x 6.18“)
Weight 7.9kg (17.42 lb)
Option Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3, Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor: DP-0206
|
Roadboy 65 passive slave speaker unit - 30 W RMS
- 120 W Peak
- 3.6 kg
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
Reviews
There are no reviews yet.