| Content |
Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.
Sensitivity (SPL) 86dB (2.83 Vrms input)
Frequency response 120Hz – 20kHz
Impedance 8 Ohms compatible
Recommended amplifier power 15-200 Watts
Drivers 1 x 2.25ʼʼ (57mm) BMR driver
Dimensions 98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight 0.46kg (1.01 lbs)
Key Features
Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
IP65 rated for suitability in high humidity and dusty environments
Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
Metal back box integrated into the product
Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole
| * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems.
Specifications:
- 85 Hz to 20 kHz frequency range
- 30 watts continuous program power (15W pink noise)capacity
- 86 dB sensitivity (1W/1m)
- Shallow steel back-can (only 4 in deep)
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
Recommended Usage In-Ceiling Front / Surround Speakers
Type 2-way coaxial
Woofers 8” PP (polypropylene) mica cone
Tweeters 1” fluid-cooled soft dome
Swivel Tweeter and Midrange Driver (Tweeters)
Paintable Grill with Protective Cover Included Yes
Frequency Response 50 Hz – 28 kHz
Sensitivity 90 dB (2.83 V, 1 m)
Input Power (Maximum / Nominal) 140W / 50W
Impedance 8 Ohms
Product Dimensions (W x H x D) 11-1/8" x 4-3/4“
Mounting Depth 4-1/4”
Product Weight (lbs. each) 4.2
|
Reviews
There are no reviews yet.