CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single)

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

• Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
• Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
• Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
• Directivity Factor (Q) : 8.7 (1k - 16kHz)
• Directivity Index (DI) : 9.4 dB (1k - 16kHz)
• Long-Term System : 250 W (1000 W peak), 2 hrs
• Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
• Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
• Maximum SPL6 : 118 dB cont ave (124 dB peak)
• Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
• Nominal Impedance : 8 ohms
• Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
• Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
• Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
• Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
• Net Weight : 16.0 lbs. (7.3 kg)
• Shipping Weight : 19.4 lbs. (8.8 kg)

1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9

    * Frequency Response (-10 dB)1: 150 Hz - 20 kHz
    * Frequency Range (±3 dB)1: 200 Hz - 17 kHz
    * Power Capacity:
          o 50 Watts Continuous Program Power (2 hrs)
          o 25 Watts Continuous Pink Noise (2 hrs)
          o 30 Watts Continuous Program Power (100 hrs)
          o 15 Watts Continuous Pink Noise (100 hrs)
    * Nominal Sensitivity:
          o 87 dB (4.0 V, 1 W)
          o 84 dB (2.83 V)
    * Nominal Coverage Angle3: 140° (+25°/-50°)
    * Directivity (Q): 4.7
    * Directivity Index (DI): 6.2 dB
    * Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
    * Rated Impedance: 16 ohms (no transformer taps)
    * Recommended High-Pass Frequency: 150 Hz

Transducer

    * Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.

Enclosure

    * Enclosure Material: High impact polystyrene
    * Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
    * Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
    * Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
    * Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
    * Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
    * Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
    * Net Weight (ea): 0.7 kg (1.5 lbs)
    * Shipping Weight (pair): 2.0 kg (4.3 lbs)
    * Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.

Driver Complement
Mid/Woofer     1 - 8" Diameter (20.32cm)
Dynamic Balance polymer composite cone driver
Tweeter     1 - 1" Diameter (2.54cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response     35Hz-20kHz
Lower -3dB Limit     50Hz
Upper -3dB Limit     20Khz
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     90 dB
Dimensions
Overall Diameter     10-5/8“(26.99cm)
Cut-out Diameter     9-3/8“(23.81cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     3-7/8" (9.84cm)
Overall Depth     4-3/8" (11.11cm)
Shipping/Other      
Product Weight     3.5000 lbs. (1.59kgs) each
Total Shipping Weight     5.0000 lbs. (2.27kgs)
Speaker Warranty     Lifetime Warranty