RANE RPM 26z Programmable Multiprocessor with 2 Analog Line Level Inputs, AES3 Input, 6 Analog Outputs

The RPM 26z is a 100% drag and drop configurable DSP-based device, set up and controlled using Rane's Drag Net software. Industry standard 10Base-T Ethernet is used to communicate between Drag Net devices and any Ethernet-equipped PC running Microsoft Windows.

Drag Net offers the ultimate in signal processing flexibility, allowing you to draw the system you need without signal flow restrictions. Familiar Windows file management tools and Shortcuts are incorporated into Drag Net, allowing complete project management within a single Interface.

The RPM 26z provides two Balanced, Line-Level analog inputs and six Balanced analog outputs. A two channel AES3 Digital input is also provided making the RPM 26z a true 4-input, 6-output device. All I/O, including the AES3 input, has its own 100% user-defined signal processing path.

Cost-effective end user control is possible using optional Rane accessories in conjunction with the Versatile Input Port. Whether your application requires contact closure Preset recall or remote level control using a potentiometer on a wall, the RPM 26z keeps the user Interface easy and inexpensive.

Euroblock connectors are provided for Audio and logic I/O. Grounding screws for direct connection to the metal chassis are provided for solving EMI problems due to shield wiring. Also found on the rear panel is a standard XLR-type connector for the AES3 input, an RJ-45 Ethernet connector for computer control, and an IEC AC power input.

All DSP algorithms are not created equally and textbook DSP algorithms miss the mark where the rubber meets the road. Rane's team of audio-savvy DSP mathematicians -- a rare breed itself -- in conjunction with our industry-leading analog signal processing gurus have combined forces to offer superlative Digital and analog Audio performance. With 24-bit converters, greater than 104 dB throughput Dynamic Range and double-precision 48-bit internal DSP 'math,' the RPM 26z offers the best DSP algorithms and Audio performance available.

This ain't no Internet appliance! For example, the RPM 26z's 215 MIPs translate into 150 fully Parametric EQ filters, should you need multiple channels of 15 band parametrics and nothing else.

Product Features:

16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality
8 analog, servo-balanced XLR outputs
AES50 network ports featuring KLARK TEKNIKʼs SuperMAC networking capability for ultra-low jitter and latency
Up to 100 m networking capability via CAT-5e cable (not included)
Dual AES50 ports for cascading S16 units—no merger or router required
Precise LED metering plus 7-segment displays for signal control on stage
Phones output assignable to any of the inputs/outputs for on-stage monitoring
Connectivity for BEHRINGER's P-16 Personal Monitoring System for In-Ear applications (not included)
Dual ADAT outputs for use in splitter mode and stand-alone digital multicore applications
MIDI In/Out for bi-directional communication between FOH console and on-stage MIDI devices
USB connector for system updates via PC
"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
"Built like a tank" yet compact, all-steel 2U rack-mount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

KLARK TEKNIK AES50

KLARK TEKNIK SuperMAC (AES50-Compliant) technology gives the S16 its high-capacity digital interconnectivity with ultra-low latency operation, as well as superbly simple deployment and ease of use. KLARK TEKNIK engineers worked hand-in-hand with BEHRINGER product developers to ensure the S16 meets, or exceeds, the requirements of live performance entertainers and their professional audio engineers. Some of the outstanding features are:
48 bidirectional audio channels over CAT5 cable (48 kHz)
24 bidirectional audio channels over CAT5 cable (96 kHz)
Single cable duplex interconnection for audio and sample clocks
Ethernet physical layer audio data transmission
High channel count and ultra-low deterministic latency
Accurate phase-aligned clock distribution.
Comprehensive error detection
and management
Provision for redundant networking
Minimal configuration ñ total ease of deployment and use
Ethernet TCP/IP protocol-compatible auxiliary data channel
Royalty-free implementations available as Xilinx FPGA cores
OEM modules available from developer partners

User's Manual

The Soundweb London BLU-102 offers a fixed configuration of 10 analog inputs and 8 analog outputs, an analog telephone interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.

The RJ-11 port enables the BLU-102 to interface with a standard POTS (aka PSTN or Analog PBX) telephone network.

The BLU-102 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

The BLU-102 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.

Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.

This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

The BLU-102 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.

Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-102 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-102 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Key Features:
• 10 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• RJ-11 Telephone Input/Output Port
• Configurable Signal Processing
• 8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect

• Wireless Digital Audio Receiver System
• Operating Band ISM 2.4GHz (free band).
• One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
• GFSK digital modulation/demodulation.
• External antenna can help to increase the transmission distance.
• Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
• Automatic mute in bad channel quality conditions or high error code rate.
• Transmission distance higher than 30 meters in open places.
• Up to three transmitters WDT 24 in a zone
• Balanced XLR and unbalanced ¼\'\' jack outputs
• Working mode: stereo or mono

Κάρτα 4άρων εισόδων για BLU-800, BLU-320, BLU-160 & BLU-120 με δυνατότητα Echo cancellation.

                    AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
                    Optional X-Video expansion card to provide master video sync generator
                    Realtime format conversion between all digital formats
                    Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
                    Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
                    Three stage Termination Sensing for each word clock output

                
                INPUTS
                    2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
                    S/PDIF optical on TOS-LINK 44.1-48k
                    S/PDIF coaxial on RCA 44.1-192k
                    ADAT 44.1-48k
                    ADAT/SMUX II for 88.2-96k
                    ADAT/SMUX IV for 176.4-192k
                    Word Clock BNC 44.1 –192k
                    Video
                    Optional video sync (X-Video card)
                
                OUTPUTS
                    2 x AES-EBU on XLR single or double wide 44.1-192k
                    S/PDIF coaxial 44.1-192k
                    S/PDIF optical on TOS-LINK 44.1-48k
                    6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
                    ADAT
                    SMUX II
                    SMUX IV
                    Optional video sync (X-Video card)
                
                SPECS
                    Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
                    Video: PAL/NTSC/60Hz
                    "SuperClock" (256fs)
                    Pull up/down 0.1% and 4% from any sample rate
                    Apogee´s new Ultra Low Jitter C777 clock
                    Three stage termination indicator (under/correct/over) on each
                    Word Clock output:
                    "SureLock" technology for drop out prevention
                    4 digit numeric true sample rate indication
                    Universal power: 15 W 90-250 VAC 50-60 HZ

Connection:

Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
         
Operating System:

Mac and Windows