| Content |
The JBL JRX125 is a dual 15? speaker system, which has become one of the most popular configurations with DJs and musicians who are looking for more low-frequency performance while maintaining the simplicity of a single-box system. The JRX125 is actually a ?quasi three-way? design. This means that the upper woofer covers lows and mids. The bottom woofer uses a lower crossover frequency and covers only lows, acting as a built-in subwoofer. So you get the extra low-end of a dual 15? rig while maintaining the superior mid-frequency performance of a single driver system. Dimensions: 43.25 x 18.25 x 17“, 94 lbs (42.6 kg).
JBL designed the new JRX100 series for cost-conscious musicians, DJs and other users of live sound reinforcement speakers. All full-range models feature Neutrik? Speakon? and 1/4" input connectors. JRX100 cabinets are constructed of carpet-covered, 3/4" MDF - a material that is structurally and acoustically superior to the particleboard that is used by many competitive products. To minimize distortion, heavy gauge wire is used for inductors and SonicGuard? high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. The JRX115 and JRX112M's innovative, new dual-angle pole socket allows them to be mounted in either a conventional, vertical position, or with a 10 degree down angle. By aiming the speaker down, you get more even audience coverage and reduce the destructive acoustic reflections from walls. JBL constructs the JRX enclosures with advanced adhesives and closely mechanically spaced fasteners, not just glue. They use non-resonant, all metal handles, and an 18-gauge, full metal grille. All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive.
- System Type: Dual 15" 2-way, sound reinforcement speaker
- Frequency Range (-10 dB):2 35 Hz - 16 kHz
- Frequency Response (±3 dB):2 45 Hz - 12 kHz
- Sensitivity (1w/1m): 100 dB SPL
- Nominal Impedance: 4
- Peak Power Capacity: 2000 watts
- Maximum SPL: 133 dB
- Nominal Dispersion: 90° x 50°
- Crossover Frequency: 2 kHz
- Dimensions (H x W x D): 43 in x 18.3 in x 17 in
- High Frequency Driver: JBL 2412, 1" exit compression driver mounted on Progressive
- Transition™ Waveguide
- Low Frequency Driver: JBL M115-8A x 2
Input Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel. - Enclosure Construction: 19 mm (¾ in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint detail; covered in black carpet.
- Grill: 18-gauge, powder-coated steel.
|
- High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power)
- Available in black or white finish
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Overload-protection circuitry ensures optimal HF driver protection
- Versatile trapezoidal enclosure design allows different positioning:
- -Stand mounting with 35-mm pole socket
- -Tilts on its side for use as a floor monitor
- Optional swiveling mounting brackets
- Ergonomically shaped handles for easy carrying and setup
- 2 professional speaker connectors plus 1⁄4'' jack connectors
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
These loudspeakers take everything musicians love about the original B215 and upgrade them with the same bass and treble/mid transducers found in our wildly popular B215A active versions for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.
Triumphant transducers
Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.
Big sound, lightweight, low price
Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B215XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 1000 Watts), they are easy to lift by their recessed handles (38.7 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?
Get on the stick…or get on down
The B215XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach B215XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because these loudspeakers have two parallel inputs, you can connect up to two of them to any channel on a power amp.
But they don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.
Choose white, black, on or off the wall…
You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B215XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you!
|
With the newly designed D15-3, DYNACORD fulfi lls a longtime customer demand for a light-weight, extremely robust high-performance professional 15" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D15-3 is also ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies a DYNACORD DND 15400 Neodymium cone transducer is used.
The midrange is projected from the ultra-low distortion DYNACORD DND 6120 Neodymium cone transducer with a conical radiation pattern of 120°. The DND 6120 guarantees excellent intelligibility without any necessity of precise aiming. The Electro-Voice DH 3 driver is used for the projection of the high frequencies. The Constant-Direcctivity HF horn has been integrated into the baffl e by CAD methods. The nominal coverage angle of the cabinet is 90°*50°, horizontal*vertical, respectively. Power handling of the cabinet is 500W (continuous), 1000W (program) and 2000W peak. The maximum sound pressure level is 130dB, the frequency range of the D15-3 is 50Hz to 18kHz. The D15-3 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in high-performance small-format active and passive satellite systems. |
The Electro-Voice TX1152 Tour-X is a high power, high sensitivity, 15" 2-way PA loudspeaker system to use when high-quality sound reinforcement is required in a lightweight package.
The TX1152 PA speaker uses a DH3, high output 1.25" titanium compression driver, coupled to a Constant Directivity 60 degree x 40 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications.
The SMX2151 15" woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.
The TX1152 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1152 to be suspended in a various positions. The recessed input panel with dual NL4 connectors panel keeps the connectors hidden, while allowing the TX1152 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed. |
|
Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15" low frequency driver with 2" titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.
| |
SPECIFICATIONS
| | MODEL | TITAN 15 PASSIVE | | GENERAL INFO |
| | System type | 15" 2-way passive | | Frequency response +/- 3db | 50-18kHz | | Sensitivity (db 1w@1m) | 97dB | | System impedance | 8 ohms | | Maximum SPL Peak dB | 129dB | | POWER HANDLING (Watts) |
| | Continuous RMS | 400 | | Program | 800 | | Peak | 1600 | | LF DRIVER |
| | Lf driver size mm / inches | 1x15“ | | Lf voice coil size | 75mm/3“ | | HF SECTION |
| | Hf voice coil size | 51mm/2" | | Hf type | Compression Driver | | Hf diaphragm material | Titanium | | Horn dispersion (H x V) | 90 x 60 | | Hf exit size mm / inches | 25mm/1“ | | Hf horn shape | EWG™ - Elliptical Waveguide | | Hf peak indicator | Peak LED ring in horn throat | | CROSSOVER SECTION | 2-way | | Crossover Frequency / Filter | 1.8kHz / 12dB per oct. | | Hf driver protection | DTF™ - Dynamic Thermal Filament (2 x SK3 Bulb) | | PHYSICAL FEATURES |
| | Finish | Black or White | | Handle quantity | 2 carry handles (one on each side) | | Suspension points | (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint | | Stand adapter - BOTTOM | Pole-mount receptacle with lock screw, Optional wall-mount bracket | | Enclosure type | Molded Polypropylene | | Enclosure shape | Trapezoidal for vertical array and horizontal stage monitor applications | | IN / OUT PANEL (speaker Level) |
| | Input connector | 2 x 1/4" jacks and2 x Speakon™ | | DIMENSIONS & WEIGHT |
| | Height ( mm / ins ) | 708mm/27.9“ | | Width Front / Rear / mm / ins | 477.8mm/18.8“ | | Depth ( mm / ins ) | 401.77mm/15.8“ | | Net weight ( kg / lbs ) | 22kg/48.4 lbs | | Gross weight ( kg / lbs ) | 25kg/55 lbs | |
|
Ηχείο 3-Way Full-Range υψηλής ισχύος 1450W
κατασκευασμένο από πολύφυλλo ξύλο συμήδας
και επένδυση Duraflex. Απόκριση συχνοτήτων:
38 Hz - 20 kHz. Ευαισθησία: LF: 127dB-SPL cont
avg (133 dB peak) Tri-amp mode: MF: 133dBSPL
cont avg (139dB peak) HF: 135dB-SPL cont
avg (141dB peak) Bi-amp mode: MF/HF: 133dBSPL
cont avg (139dB peak) με woofer 15" 2265H
LF: 1000W (4000W peak), 2 hrs, 750 W (3000
W peak), 100 hrs JBL Differential Drive® διπλού
πηνίου 75mm (3-in). Driver μεσέων συχνοτή των
CMCD-82H 8" MF: 350 W (1400W peak), 2 hrs
με ενσωματωμένο περιστρεφόμενο κυματοδηγό
και 2432H driver υψηλών συχνοτήτων HF: 100
W (400 W peak), 2 hrs με στόμιο χοάνης 38mm
(1.5 in), πηνίο φωνής 75mm(3 in) και διασπορά
χοάνης. 60° x 40°. Δυνατοτητα διενίσχυσης/
τριενίσχυσης με διακόπτη. Διατίθεται και σε
λευκό χρώμα (-WH). Διαθέτει υποδοχές (13 x
M10) για eyebolts σε χρήση μόνιμων
εγκαταστάσεων (διατίθονται σαν option). Eπίσης
μπορεί να δεχτεί το Planar Array Frame kits PAF-
2K and PAF-3K για κρέμαση πολλαπλών ηχείων
(option). Χρήσεις: PA, θέατρα, Disco/Club,
Aμφιθέατρα, Αθλητικές Εγκαταστάσεις, θεματικά πάρκα κλπ.
Διαστάσεις ΥΠΒ 967 x 561 x 657 mm. Βάρος
45,8 κιλά.
|
Reviews
There are no reviews yet.