| Content |
Features at a glance - Supercardioid shotgun microphone
- Shoe adapter (ISO/JIS standard) attaches to a camera accessory shoe.
- Records to microSD or microSDHC cards.
- Records 44.1/ 48 kHz, 16/24-bit, mono or poly linear PCM (WAV/BWF)files.
- Built-in clock stamps BWF files with time-of-day information for additional convenience when editing or searching for files.
- Equalizer has four presets that can be selected to match the recording conditions.
- Limiter automatically reduces high input levels to suitable levels.
- Low cut filter reduces low-frequency noise (120Hz cutoff frequency).
- Dual recording for two files to be recorded simultaneously with different gain levels.
- Slate tone for conveniently synchronizing with video files.
- Camera out jack (combined with headphone jack)outputs audio to a camera.
- Automatic file closing prevents the loss of data before the battery runs out.
- Included noise isolation arm reduces lens operation noise.
- Included attenuation cable matches output audio signal level when connected to a camera.
- Included cable clip secures attenuation and headphone cables.
- Tripod threads (ISO/JIS standards for mounting directly to a camera tripod or rig.
- Playback to headphones to check recorded file contents immediately.
- Time track increment silently and seamlessly splits a recording by creating a new file at regular intervals (about 15 minutes)for easier editing.
- File naming based on a user-specified word or the current date.
- Operates on 1 AAA battery (alkaline, rechargeable NiMH or disposable lithium)or USB bus power.
- Secondary lithium-ion battery maintains date and time information.
- 3.5mm(1/8“)headphone jack built in.
- Easy to read 96×16 dot OEL display with wide viewing angle.
- Micro-B USB 2.0 port to easily transfer files to a computer.
|
Specifications | General | | Recording media | | CompactFlash (CF) card | | File system | | FAT32 | | Recording format | | BWF (Monophonic, Polyphonic) | | Number of channels | | 8 channels (44.1/48/88.2/96 kHz)
8 channels + stereo mix (44.1/48 kHz)
4 channels (176.4/192 kHz) | | Quantization bit rate | | 16/24 bit | | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | Reference clock | | Internal, Word In, Video In, Digital In (AES 1-8 IN, AES A-BIN, ADAT 1-8 IN) | | Type of timecode frame | | 23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF | | Limiter | | Attack time: 3 ms
Release time: 300 ms
Threshold: –5 dBFS
Ratio: 32:1 | | Analogue audio inputs and outputs | | The error for nominal and maximum levels is ±1dB for all input and output jacks except the PHONES jack. | | ANALOG INPUT (1-8) | | D-sub 25-pin | | Input impedance | | 10 kOhm | | Nominal input level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG INPUT (L/A, R/B) | | XLR-3-31 (1: GND, 2: HOT, 3: COLD) | | Input impedance | | 10 kOhm | | Nominal input level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG OUTPUT (1-8) | | D-sub, 25-pin | | Output impedance | | 100 Ohm | | Nominal output level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG OUTPUT (A/B) | | XLR-3-32 (1: GND, 2: HOT, 3: COLD) | | Output impedance | | 100 Ohm | | Nominal output level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | PHONES connector | | 6.3-mm standard stereo jack | | Maximum output power | | 45 mW + 45 mW or more (THD+N 0.1 % or less, into 32 Ohm) | | Digital audio inputs and outputs | | DIGITAL IN/OUT (AES/EBU) | | D-sub, 25-pin | | Minimum input voltage | | 2 Vpp | | Maximum input voltage | | 7 Vpp | | Output voltage | | 2–5 Vpp | | Format | | AES3-2003/IEC 60958-4 (AES/EBU) | | DIGITAL I/O (ADAT) | | ADAT optical | | Format | | ADAT | | DIGITAL INPUT A-B | | XLR-3-31 | | Input voltage | | 2–7 Vpp at 110 Ohm | | Format | | AES3-2003 (AES/EBU) | | DIGITAL OUTPUT L-R | | XLR-3-32 | | Output voltage | | 2–5 Vpp at 110 Ohm | | Format | | AES3-2003 (AES/EBU) | | Other inputs and outputs | | RS-422 | | D-sub, 9-pin | | RS-232C | | D-sub, 9-pin | | PARALLEL | | D-sub, 25-pin | | CASCADE IN | | BNC | | Input voltage | | TTL equivalent (5 V) | | Input impedance | | 75 Ohm ±10 %
Allowable frequency deviation of external synchronization: ± 100 ppm | | CASCADE OUT | | BNC | | Output voltage | | TTL equivalent (5 V) | | Output impedance | | 75 Ohm ±10 % | | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | TIME CODE IN | | BNC | | Input voltage | | 0.5–5 Vpp | | Input impedance | | 20 kOhm | | TIME CODE OUT | | BNC | | Output voltage | | 2–5 Vpp | | Output impedance | | 600 Ohm ±10 | | WORD/VIDEO IN | | BNC | | Input voltage | | TTL equivalent (5 V) | | Input impedance | | 75 Ohm ±10 %
Allowable frequency deviation of external synchronization: ± 100 ppm | | WORD/VIDEO THRU/OUT | | BNC
OUT/THRU switch included (OUT is for WORD OUT only) | | Output voltage | | TTL equivalent (5 V) | | Output impedance | | 75 Ohm ±10 % | | Sampling frequency (when using WORD) | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | ETHERNET | | RJ45 | | Keyboard | | Mini-DIN (PS/2) | | USB | | USB A-type, 4-pin | | Protocol | | USB2.0 HIGH SPEED (480 Mbit/s) | | Audio performance (analogue input to analogue outp | | Frequency response | | | | 20 Hz - 20 kHz | | ±0,5 dB (all sampling rates) | | at 40 kHz | | +0,5 dB/–2 dB (Fs = 88.2/96 kHz) | | at 80 kHz | | +0,5 dB/–5 dB (Fs = 176.4/192 kHz) | | Distortion | | ≤0.005% (Reference level: –20 dB, input level: +23 dBu, 1 kHz, AES-17LPF) | | S/N ratio | | ≥100 dB(A) (22 kHz LPF) | | Power requirements and other specifications | | Power requirements | | 100–240 V AC, 50–60 Hz | | Power consumption | | 26 W | | Dimensions (W x H x D) | | 483 mm x 88 mm x 288 mm | | Weight | | 4.8 kg | | Operating temperature range | | 5–35 °C |
|
Work faster in your Pro Tools® environment with direct access to primary transport and editing functions. This affordable Digidesign® Pro Tools Custom Keyboard uses the same symbols and color coding system built into the ICON D-Control™ worksurface and other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards.
With functionality specific to Mac systems, the keyboard features plug-and-play USB connectivity.
Features
- Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
- Based on Apple Mac G5 Pro Keyboard
- Two USB ports and USB connection cord
System Requirements
- Digidesign-qualified Mac-based Pro Tools|HD®, Pro Tools LE™, or Pro Tools M-Powered™ system. (Note that some key commands are available only with Pro Tools HD software or with the DV Toolkit™ 2 option for Pro Tools LE.)
|
Stereo Rack Memory Recorder
The UR-2 is a 1 U rack size stereo audio recorder using SD card and USB storage device that is flexibly adapting to the wide variety of playback requirements.
The UR-2 is a new generation stereo memory recorder from Fostex that uses 2 SD cards (SDHC compatible) and USB storage device as the recording media. The recording/ playback file format is BWF (WAV). Its ample playback functions will adapt to the wide variety of playback requirements. It offers high quality recording of up to 24bit/96kHz (in BWF format). Employing FAT 32 disc format, it is easy to process the file transfer to a PC based DAW.
The analog input and output are balanced XLR/+4dBu and un-balanced RCA/-10dBV, the digital input and output complies to AES/EBU and S/P DIF digital signal. It is flexible to be used in the available audio system. The playback function includes Chain Play and Timer Play, it is suitable for live stage performance and sound installation. In addition to the external control via parallel remote with D-Sub 25pin and RS-232C serial remote, a USB keyboard and 10-key keyboard can trigger the instant playback start, which is very useful at a live event, theater and broadcast environments.
The Mic input located on the front panel offers 48V phantom power, it can be used not only for recording but also for speech to be mixed with playback source. Last but not least, its newly employed organic EL display gives an extremely clear visibility. This combined with DC power operation, it serves for outdoor use very well.
MAIN FEATURES
• 2 sets SD card slots and a USB host connector for alternate recording/playback among the different media.
• Stereo or Mono WAV (BWF) recording to SD card (also SDHC) and USB storage device
• Fs: 44.1/48/88.2/96kHz, Quantization: 16/24bit
• High speed file transfer with PC via USB 2.0 (bi-directional)
• Employing FAT32 format, it allows to directly mount the recorded files to PC.
• It adapts to a wide variety of use environment by offering Chain Play and Memory Play.
• Timer Play and Power ON Play enable automatic playback start for such as chime and repetitive announcement, which are convenient in the installation audio industry.
• The play mode list employs CSV file format so that it is easy to edit by a text editor or spread sheet program software on PC.
• 99 Cue points with locate function. Waveform display under Scrub mode offers easy and visual Cue point setting
• Microphone input with P48V available on the front panel. Not only for recording but for speech to be mixed with playback source.
• Analog I/O with balanced XLR and un-balanced RCA pin jacks, Digital I/O with XLR connectors
• An organic EL display offers high visibility.
• Remote transport control via Foot SW, Parallel remote pot (Dsub 25pin) and RS-232C (D-sub 9pin)
• External USB keyboard can be used not only for file name editing but for transport control such as REC and PLAY.
| Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording.
For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example.
Main Features
32-track digital Portastudio
8 mono tracks, 12 stereo tracks (can also be used as mono tracks)
Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution
Simultaneous playback of all 32 tracks
Virtual tracks for alternate takes and undo
Dedicated stereo master track
Colour LC display and 12-encoder channel strip for simple operation
Built-in 40-channel mixer
Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track
Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track
Dedicated controls for EQ, pan and effect sends
Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording
8 balanced microphone inputs on balanced combo XLR/jack connectors
Switchable phantom power for 4 channels each
One input switchable to instrument level for direct recording of a guitar or bass
Unbalanced stereo output (RCA jacks)
Balanced stereo monitor output (6.3-mm TRS jacks)
Two unbalanced effect sends (6.3-mm TS jacks)
Stereo headphones output (6.3-mm TRS jack)
MIDI input and output for MMC, Control Change and MTC output
Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory)
Input effects (Limiter, Compressor, Noise suppressor, Exciter)
Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter)
Mixdown effects (Reverb, Delay, Stereo chorus)
Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping)
Mark function (up to 99 location marks)
Built-in chromatic tuner and metronome
CD-RW drive for audio CD creation as well as file import and export
USB 2.0 port for data backup/restore and file transfer with a computer
Specifications
Recording media and file systems
Recording media SD card (512 MB to 2 GB)
SDHC card (4–32 GB)
File system SD card (512 MB to 2 GB): FAT16
SDHC card (4–32 GB): FAT32
Analogue audio inputs and outputs
MIC/LINE INPUTS A–H, XLR (balanced)
Connector XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance 2.4 kOhm
Nominal input level –14 dBu
Maximum input level +2 dBu
MIC/LINE INPUTS A–H, phone jack (balanced)
Connector 6.3-mm TRS phone jack
Input impedance >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR)
Nominal input level +4 dBu
Maximum input level +20 dBu
STEREO OUT L/R connectors RCA pin jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
EFFECT SENDS 1/2 connectors 6.3-mm TS phone jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
MONITOR OUT L/R connectors 6.3-mm TRS phone jack
Nominal output level –2 dBu
Maximum output level +14 dBu
Output impedance 200 Ohm
PHONES connector 6.3-mm TRS phone jack
Maximum output power 70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load)
Other inputs and outputs
MIDI input (MIDI IN) DIN 5 pin
Format Standard MIDI format
MIDI output (MIDI OUT) DIN 5 pin
Format Standard MIDI format
USB connector USB 4-pin mini-B type
Format Mass Storage Class USB 2.0 High Speed
REMOTE connector 2.5-mm TRS jack
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Operating system requirements
Windows Pentium 300 MHz or faster
128 MB or more memory
Macintosh Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port USB 2.0
Recommended USB host controller Intel chipset
Supported operating systems Windows XP, Windows Vista, Windows 7
Mac OS X 10.2 or later
Power requirements and other specifications
Power supply AC adaptor (TASCAM PS-1225L)
Power consumption 12 W (Phantom power on)
Dimensions (Width x Height x Depth, excluding projections) 514 mm x 104 mm x 340 mm
Weight 6.2 kg
Operating temperature 5–35 °C
Design and specifications subject to change without notice. |
Apogee makes the direct connection to Pro Tools | HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD™ systems and Apogee's X-Series or Rosetta 200 converters. The result is an incredibly powerful combination of Digidesign's™Ê¼ Pro Tools software and Apogee's superior conversion and clocking hardware. Features: - Primary HD port for connecting directly to HD Core or Accel cards.
- Expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200)
- Compatible with the latest versions of ProTools
- May be used along side similar interfaces (such as Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8)
- Please note: Not compatible with Pro Tools|HD Native
|
Reviews
There are no reviews yet.