Content |
The DVA T4 Top is equipped with a constant directivity horn for the High and Mid section and offers a nominal coverage angle of 100°x15°. The CD-Horn provides high flexibility and a good natured attitude if for instance the Array is not aligned correctly. The DVA uses apart from the formation of cylindrical waves (very much depending on the number of T4 elements) the vector summing of the individual horns. This means that with growing distance to the source (if set up correctly) the listener perceives more and more vector sums of the single elements. However it has to be considered, that the fewer elements are used to spread the sound to a specific area, the stronger must be the curving of them. Thatʼs how the effect of optimised SPL distribution is managed.
Amplifier
Amp Technology
|
Digital Class-T, var. clock frequency
|
Amp Class
|
Class D
|
HF Amp
|
100 W
|
MF Amp
|
100 W
|
LF Amp
|
220 W
|
Cooling
|
Convection
|
Dimensions:
-
Width 580 mm (23.2 in)
-
Height 240 mm (9.6 in)
-
Depth 327 mm (13.08 in)
-
Weight 13.2 kg (29.1 lbs)
|
Ηχοστήλη Line Array, 325W/1300W peak, με τεχνολογία σταθερής διασποράς Constant Beam width Technology με 16 x 2ΆΆ full range woofers 80Hz-20kHz- Επιλεγόμενη οριζόντια διασπορά 15/40 μοίρες x Κάθετη Διασπορά 150 μοίρες. Διαθέτει διακόπτη επιλογής για χρήση φωνής σε Νarrow mode 121dB cont/127peak/Μουσικής 118dB cont/124 peak. Broadband mode φωνής118dB cont/124 peak/Μουσικής 115dB cont/121 peak Διαθέτει κύκλωμα sonic guard για προστασία υπερφόρτωσης και μετασχηματιστή για χρήση 70/100V100W/50W/30W ?αλλά και χρήση 8Ω. Περιέχεται βάση στήριξης. Καμπίνα fiberglass με 18 x M6 υποδοχές στήριξης, Πιστοποίηση IP544 /IEC 259 για αντοχή σε υγρασία και αλάτι. Διατίθεται σαν option προστατευτικό κάλυμμα συνδέσεων MTC-PC2. Διαστάσεις ΥΠΒ: 1000 x 98.5 x 153 mm. Χρώμα Μαύρο-Λευκό. Βάρος 7.2kg. |
The SR-S4S is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | Dimensions | 160 (W) × 892 (H) × 303 (D) mm | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4,
Stand adapter: SR-SA4, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
TOA SR-A Series Mid-Size Line Arrays feature TOAʼs proprietary "Synch-Drive" horn technology (pat. pending) to provide a uniform, high frequency sound field offering excellent sound clarity and minimal interference. Mid-high modules include the SR-A12L (long-throw) and the SR-A12S (short-throw) each with dual compression drivers and 12" low frequency driver. The SR-A18 subwoofer module features a heavy duty 18" low frequency driver rated at 720 Watts continuous power handling. Along with weather resistant models and multiple mounting hardware options, the SR-A Series Line Arrays are backed with a five year product warranty. FEATURES: | - Designed for wide bandwidth response - These compact and powerful 2-way modular speaker units can be used in multiple configurations as required to deliver greater output power with a more extended frequency response.
- High-performance driver units - Each Type A Series speaker module contains a 30cm (12“) low frequency unit and a high-frequency horn attached to two compression drivers for greater output.
- Wavefront control - The horn incorporates a proprietary phase wavefront control throat that functions to obtain the best possible performance from the high frequency drivers.
- Adjustable sound coverage - Type A Series provides two speaker configurations designed for specific coverage characteristics, each having a different taper. The 5-degree taper is for effectively transmitting sound over distance while the 15-degree taper is optimized for excellent short range coverage.
- Simple maintenance - Maintenance and servicing are made easier on the Type A Series to suit it for permanent installations. All driver replacement is possible from the speaker's rear, a simple and speedy procedure.
- SR-A12L Long-throw enclosure (15°V x 90°H)
- SR-A12S Short-throw enclosure (5°V x 90°H)
- Components: Dual compression drivers. 12” low frequency driver. Power handling: 450 W (LF), 180 W (HF)
- SR-A18 Subwoofer (Sold Seperately) 18” low frequency Power handling: 720 W
- Five year warranty
| General Specs: | | Enclosure: | ....... | Bass Reflex Type | | Power Handling Capacity: | ....... | Continuous Program: Low 450W, High 180W | | Rated Impedance: | ....... | Low: 8 Ohms, High: 16 Ohms | | Sensitivity: | ....... | Low: 98dB, High: 109dB both at 1W/1M | | Frequency Response: | ....... | 50 Hz - 20kHz (When using DP-0206 Option) | | Crossover Frequency: | ....... | 1000Hz (When using DP-0206 Option) | | Directivity Angle: | ....... | Horizontal: 90 degrees Vertical: 15 degrees | | Speaker Component: | ....... | Low frequency: 30cm cone-type High frequency: Wave front control horn 90° (horizontal) × 15° (vertical) + compression driver × 2 | Input Connector: | ....... | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x 2 (usable connector: Neutrik NL4FC) | | Finish: | Enclosure: | ....... | Plywood black, paint | | Front Grill: | ....... | Punched steel plate, black, acrylic paint | Dimensions: | ....... | 740 (W) x 433 (H) x 467 (D) mm | | Weight: | ....... | 47kg including accessories | | Accessories: | ....... | Joint Plate x 2, Joint plate mounting bolt (M10) x 16 | | Option: | ....... | Rigging Frame: SR-RF12, Digital Processor: DP-0206 | |
|
TOA HX-5 Array system
Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1
|
The SR-C15BWP Sub-woofer system is designed to be used in conjunction with the SR-C8LWP or SR-C8SWP Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 450 W | Rated Impedance | 8 Ω | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | Speaker Component | 38 cm (15“) cone-type | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“), 4-core cable, 3 m (9.84 ft) | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | Water Protection | IPX4 | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | Weight | 41 kg (90.39 lb) | Accessory | M8 connection bolt …4 | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.