Content |
Single 460 mm (18 in) High Power Subwoofer.
Approved by Lucasfilm, Ltd. for THX® system installations.
Low Frequency Driver: | 2241H | Frequency Range: | 25 Hz - 500 Hz (-10 dB) | Power Capacity (Continuous Pink Noise): | 600 Watts | Power Capacity (Continuous Program): | 1200 Watts | Sensitivity: | 98 dB SPL (1W, 1m, 3.3ft.) | Crossover Frequency: | 80-150 Hz recommended | Nominal Impedance: | 8 Ohms | Dimensions (HxWxD): | 1010 x 674 x 450 mm (39 3/4 x 26 1/2 x 17 3/4 in) | Net Weight: | 60 kg (131 lb) |
|
HX-5W
Variable Dispersion Speaker System. Four speaker modules ensure high power and high quality. The changeable orientation of each of the four speaker modules independently allows the directivity angle of the speaker system to be adjusted. Built-in passive network ensures appropriate sound quality. Ideal for both permanent and temporary installations, including both vertical and horizontal positioning. Equipped with a convenient carrying handle. Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets. Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting, wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed with the mounting bracket or stand adapter.
Specifications: Enclosure Type Bass Reflex Power Handling Continuous Pink Noise; 200W: Continuous Program; 600WRated Impedance 8ohms Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode) Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode) 80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode) Crossover Frequency 4kHz Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz), 30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12 Input Terminal Speakon NL4MP x 2 and M4 screw terminal Finish (Enclosure) Polypropylene, white Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches Weight 16kg Accesory Hanging bracket x 2, Hex. wrench x 1 Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB, HY-CW1W,HY-WM1W,HY-WM2W,HY-CN1W, Speaker stand adapter:HY-ST1 | Specifications :
Amplifier Section
- Channel : 5.2
- Rated Output Power (1kHz, 1ch driven) : 115 W (6 ohms, 0.9% THD)
- Rated Output Power (20Hz-20kHz, 2ch driven) : 80 W (6 ohms, 0.06% THD)
- Maximum Effective Output Power (1kHz, 1ch driven) (JEITA) : 145 W (6 ohms, 10% THD)
- High Slew Rate Amplifier : Yes
Surround Sound Processing
- Surround:AI : N/A
- CINEMA DSP : Yes
- DSP Programs : 17
- Dialog Level Adjustment : Yes
- Virtual Presence Speaker : Yes
- Virtual Surround Back Speaker : N/A
- Dialogue Lift : N/A
- SILENT CINEMA / Virtual CINEMA DSP : Yes
- Dolby Atmos : N/A
- Dolby Atmos Height Virturalizer : N/A
- Dolby TrueHD : Yes
- Dolby Digital Plus : Yes
- Dolby Surround : N/A
- DTS:X : N/A
- DTS-HD Master Audio : Yes
- Auro 3D : N/A
|
The 4642A is a high quality subwoofer system, featuring an advanced technology 460 mm (18“), low frequency transducers mounted in a direct radiator, bass-reflex enclosure for smooth response to the lowest audible frequencies. The 4642A is ideal for low-frequency augmentation of either analog or digital soundtracks in motion picture theaters and for general sound reinforcement applications.
NOTE: Consult the product page for more information on the 4642A's 2241H transducer.
Key Features:
-
1200 Watts Continuous Pink Noise, 2400 WattsContinuous Program Power Handling
-
Usable response to 22 Hz (-10 dB,no EQ), flat to22 Hz (-3 dB) with External EQ
-
2241H VGC (Vented Gap Cooled) Drivers
– High Sensitivity
– Low Power Compression
– High Maximum-SPLCapability
– Low 2nd and 3rd Harmonic Distortion
– Symmetrical Field Geometry (SFG) Magnet Structure
– Long ExcursionCapability
-
Approved by Lucasfilm, Ltd. for THX®installations
Specifications:
-
Low Frequency Drivers: (2) 2241H
-
Frequency Range: 22 Hz - 500 Hz (-10dB)
-
Power Capacity (Continuous Pink Noise): 1200Watts
-
Power Capacity (Continuous Program): 2400Watts
-
Sensitivity: 101 dB SPL (1W, 1m,3.3ft.)
-
Crossover Frequency: 80-150 Hzrecommended
-
Nominal Impedance: 4 Ohms
-
Dimensions (HxWxD): 30" x 48" x 24" (762 x 1219 x610 mm)
-
Net Weight: 98 kg (216 lb)
|
JBL Control Contractor Series 26CT Ceiling Speaker The Control 26C is a powerhouse ceiling speaker containing a coaxially mounted
6.5" woofer and 3/4" titanium-coated tweeter, able to deliver maximum sound level
over a wide coverage area. The Control 26CT includes a multitap transformer for a
70V or 100V line distribution system.
Key Features:
�75 Hz to 20 kHz frequency range (-10 dB)
�140 watts continuous program power capacity
�89 dB sensitivity (1W/1m)
�16 ohms nominal impedance
�110° conical coverage (polar)
�Steel back-can with removable locking connector
�Control 26CT 70V taps: 60W, 30W, 15W, 7.5W
�Control 26CT 100V taps: 60W, 30W, 15W.
�Dimensions (height x diameter): 210 mm x 252 mm (8.3 in x 9.9 in)
�Net Weights: Control 26C = 3.4 kg (7.5 lb), Control 26CT = 4.2 kg (10 lb)
�See Specifications PDF for more details
|
The JBL 4645C is a single 460 mm (18 in) high power subwoofer. It is approved by Lucasfilm Ltd. for THX� system installations. | Weight | 60.00 kg | 16.00 kg | N/A | 100.00 kg | 1.50 kg | 63.00 kg |
Reviews
There are no reviews yet.