Content |
Weatherproof sound projectors with injection-moulded body and coated steel grille. Suitable for indoor or outdoor music and speech applications. Fitted with 350mm four core input cable for different power ratings. The transformer may be bypassed internally to give an 8 Ohms, 25W load.
Adjustable steel mounting bracket
Weatherproof ABS enclosure
Housing material | ABS | Woofer | 165mmØ (6.5“) reinforced cone | Tweeter | Concentric 25mm (1“) mylar dome | IP rating | IPX5 | Frequency response | 100Hz - 17kHz | Power | 25W @ 8 ohms |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
BS-33AT | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | Sensitivity: | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 810g (1.79 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
BS-1030B and BS-1030W Music/Paging Speakers
The TOA BS-1030 Music/Paging Speaker has exceptional sound quality and value for a wide variety of applications. Available in black and white, the versatile BS-1030 is designed for both indoor and outdoor use with a durable ABS resin enclosure and steel mesh grille. The two-way, bass-reflex design features a 4.72" (12 cm) cone woofer, 1" (2.5 cm) dome tweeter and built-in multi-tap transformer with screwdriver-adjustable power taps. A transformer bypass setting allows direct 8-ohm operation. Installation is fast and easy with the supplied mounting bracket or rear panel keyholes for horizontal or vertical surface-mounting. The BS-1030 speakers are backed with a five year warranty.
Also see the new FB-100 and HB-1 Subwoofers.
FEATURES:
Indoor and Outdoor Applications Mounting Bracket Included Paintable Enclosure Two-Way, Bass-Reflex Design 70.7/100 V and 8-Ohm Screwdriver-Adjustable Tap Settings Black (BS-1030B) and White (BS-1030W) |
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
|
- 55 Hz to 15 kHz frequency range (-10 dB)
- 175 watts continuous program power capacity
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 2.8 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
- Net Weight: 6.3 kg (14 lb)
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.
BS-634 |
| Speaker Component: | 5" (12cm) Cone-type | Impedance: | 100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W), | Sensitivity: | (1w 1m) 90dB | Frequency Responce: | 120 -20,000Hz | Input Terminal: | Push-in terminal | Finish: | Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable | Dimensions: | 320(W)x200(H)x85(D)mm |
|
Reviews
There are no reviews yet.