AMERICAN AUDIO AVANTE A10 Active Loudspeaker 10inch 1000 Watt Peak POWER 300W RMS

The Avante Audio A10 Achromic Series is a 10“, two-way active loudspeaker with a 1000W peak dynamic amplifier and an integrated DSP for a variety of applications including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more. The Class-D amplifier delivers 250W (RMS) to the woofer, while the Class-AB amplifier drives 50W (RMS) to the high-frequency compression driver, which combine to provide a frequency range of 70 Hz to 20 kHz with a peak SPL of 121 dB.

The integrated DSP offers four modes: Normal, Club, Live, and Speech, allowing you to custom tailor the speaker to your specific application. Additionally, there is a two-band EQ to further enhance the sound. The H-PP molded enclosure features a steel grille and a dual position pole mount with 0 or 7.5° options. The rear panel offers a balanced combo XLR-1/4" input, two RCA inputs, and a balanced XLR output for connecting additional speakers. There are independent gain controls for the XLR and RCA inputs. The Avante A10 Achromic Series loudspeaker ships with a power cord.

• Amp Power: 1000W dynamic
  • LF: Class-D 250W (RMS)
  • HF: Class-AB 50W (RMS)
• Built-in digital signal processing (DSP) with LCD screen, EQ, and Presets
  • Preset 1: Normal
  • Preset 2: Live
  • Preset 3: Club
  • Preset 4: Speech
• Frequency Range: 70 Hz to 20 kHz
• Dispersion (H x V): 90 x 60°
• Output (Peak SPL at 1m): 121 dB
• Drivers: 10" woofer with 2" voice coil + 1" HF compression driver
• Inputs: Balanced combo XLR-1/4" and two RCA
• Output: Balanced XLR
• Enclosure: H-PP molded
• Grille: 1.2mm steel
• Handle: 1 x top
• Fly Points: 2 on top, 1 on back
• Pole Mounting: Dual position 0 or 7.5°

Features

    400 Watt digital bi-amplification
    127 dB max spl
    Wide dispersion 90 x 70 constant directivity horn
    10" High power woofer, 2.5" voice coil
    1" Mylar dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 50 Hz ÷ 20 kHz
    Max SPL: 127 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 1" 1.4" voice coil
    Woofer: 10" 2.5" voice coil

Input/Output Section

    Input signal: bal/unbal
    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1800 Hz
    Limiter: Fast limiter, RMS limiter
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Cabinet Material: Composite PP
    Hardware: 2 x M10 flying points
    Handles: 1 on top
    Pole Mount/Cap: yes
    Grille: steel
    Colour: Anthracite grey

Physical Specifications

    Height: 549/21.6 mm/inch
    Width: 340/13.38 mm/inch
    Depth: 304/11.96 mm/inch
    Net Weight: 13.5/29.76 kg/lbs

• 2 way full range powered loudspeaker for portable PA and installation applications
• 600 Watt power featuring KLARK TEKNIK Class-D technology
• KLARK TEKNIK Digital Signal Processing for total system control
• High excursion 10" low frequency driver with low mass voice coil for improved transient response
• 1" high temperature dome compression driver with extended high frequency reproduction
• Converging elliptical waveguide provides wide dispersion and excellent pattern control
• Speech/music switch featuring optimised equalisation for voice or music applications
• Switchable 100 Hz high pass filter for subwoofer integration
• Lightweight composite enclosure with black finish
• Rugged powder coated perforated steel mesh grille
• Dual angle pole mount for accurate audience coverage
• Multiple internal rigging points for installation applications
• 3-Year Warranty Program*
• Designed and engineered in England

• Compact live sound reinforcement
• Portable PA
• Frontfill and sidefill
• Auditorium, Clubs, Ballroom, Corporate AV, Theatre

• Active 10" 2-way bass-reflex PA speaker
• 127 dB max. SPL and 300-watt RMS performance with a highly-efficient digital amplifier
• Perfect all-rounder for full-range, satellite and monitor applications
• Practical presets for fast and user-specific frequency tuning
• Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
• 10" custom woofer and BMS tweeter driver
• Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
• 2 line/mic input channels with individual gain controllers plus mono mix output
• 12 mm birch plywood housing with ultra-robust polyurea coating and M10 rigging points
• Shock-resistant front grille for optimal protection of the speaker.
• 36 mm dual tilt stand attachment with 0° and 5° tilt angle
• Extensive and smart accessories for installation and transport

Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.

For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.

The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the  VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.

Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.

Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.

Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.

• 2-way, bi-amplified, bass reflex design
• Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
• Digital Signal Processor with graphic display
• 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
• High efficiency switch mode power supply
• Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
• 250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
• 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
• Frequency response from 58Hz to 20 kHz
• 80°H x 50°V Constant Directivity Rotatable Horn
• 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
• Speaker stand socket, one aluminium handle
• 45° monitor taper