| Content | MP16-G is a stylish and compact sound projector that is equipped with a high quality 16 W transformer.
The speaker is designed for high quality music and speech reproduction in many industrial or professional applications, indoors as well as outdoors. It combines a rugged housing with a good sound quality, and because all metal parts are either aluminum or stainless steel this speaker will stay rust-free. Guaranteed!
Thanks to the shape of the bracket it is possible to mount this sound projector with a powertool without taking the projector off the bracket. Yet again, a clever installer-friendly APart feature.
The standard color is Grey. As an option the MP16-G can be painted into any RAL color (REF : PAINTMP) Please note the minimum order quantity for PAINTMP is 12 pieces. |
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 1000: 2x500 W/100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 33 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) | ROCK608 is a low impedance two-way loudspeaker that produces a hi-fi sound quality and has a wide dispersion. An ideal loudspeaker to bring music to your garden, outdoor area of your restaurant or terrace in an inconspicious way.
The ROCK608 loudspeakers are weatherproof and with their inconspicuous design they seem to disappear into the environment, only the amazing sound will remind you of them. When you have installed the ROCK loudspeakers we will not be surprised that even working in your garden will become a pleasure. Who doesn’t want to listen to music while working in your garden or relaxing on your terrace?
The applications where these loudspeakers are enormous. They can be used in gardens, terraces, recreation parks, outdoor swimming pools...
The complete loudspeaker (the plasticized brass wire included) is weatherproof. The ROCK608 can be used with a standard stereo amplifier. |
- Weatherproof IP56 outdoor speaker
- 5.25" woofer
- 1.2" high-frequency driver
- 40 watts continuous power
- Frequency range up to 15 kHz
- Operated at 8 ohms and 100 volts
- For gardens, parks etc.
The Contractor COGS 52 is a rugged outdoor speaker in army green with an IP56 rating. It is operated at 8 ohms and 100 volts with taps for 2, 4, 8, 16 and 32 watts and is equipped with a 5.25" woofer and 1" tweeter. It achieves a sound pressure level of 86 dB at 1 W / 1 m with a power capacity of 40 watts of continuous power.
Product type
Installation Loudspeakers
Type
Outdoor Loudspeaker
Version
Outdoor Loudspeaker
Speaker type
2-way speaker
Colour
Army green
Woofer dimensions
5.25 "
Woofer size
133 mm
Tweeter dimensions
1.2 "
Tweeter dimensions (mm)
30 mm
Mounting depth
74 mm
Impedance (low-impedance)
8 Ohm(s)
100 V Inputs
16 W , 2 W , 32 W , 4 W , 8 W
Frequency response
80 - 15000 Hz
Height
372 mm
Diameter
345 mm
Weight
3,88 kg
| - Waterproof
- Woofer: 130 mm.
- RMS power: 10W switchable 100V/8Ohm
- Frequency response: 100 - 10.000 Hz
- Sensitivity: 90 dB
- Cable with 3 conductors
- Dimension: Ø 210 x 235 mm. |
The Crown® 160MA is a high-value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 160MA provides 4 inputs (each with a volume control) and a 60W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.
FEATURES
- 4 inputs (each with a volume control), and one 60W amplifier output channel
- Ideal for paging, background music, and music-on-hold
- Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
- Priority muting by VOX or external switch
- Bass and Treble controls on master output
- Three-Year, No-Fault, Fully Transferable
- Warranty completely protects your investment and guarantees its specifications
|
Reviews
There are no reviews yet.