ARTLIGHT AL-1016RGBW LED LIGHT RGBW 54X3W DMX PAR64

Info

LED Neon Flex 230V white 5000K 91cm

18 x 8W QUAD Colour LED RGBW PAR Can in black housing

Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.

It is operated using four buttons and an LED display on the back.

The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.

There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.

The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.

• Type: Studio PAR 64
• Colour spectrum: RGBW
• Number of LEDs: 18
• LED type: 8 W QUAD colour
• Refresh rate: 5000 Hz
• Beam angle: 25°
• DMX input: XLR 3-pin male
• DMX output: XLR 3-pin male
• DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
• DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
• Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
• Controls: Enter, Mode, Value Down, Value Up
• Indicators: LED display
• Power supply: 110 V AC - 250 V AC
• Power consumption: 170 W
• Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
• Housing material: metal
• Housing colour: black

Dimensions without mounting bracket

• Width: 230 mm
• Height: 220 mm
• Length: 255 mm

Ultra-high performance LED PAR 56 with 9 extremely bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 50 Watts. Like all new LED PAR cans, the CLP 56 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.

It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.

• 9 ultra-bright 3-Watt TRI colour LEDs
• Beam angle of 25 degrees
• Low power consumption of just 50 Watts
• Operated via DMX (6 channels), in master/slave mode or standalone mode
• Simple to operate using the four buttons and LED display
• Double bracket included as standard
• Cooling method: Heat sink 
• Sturdy aluminium housing

• Product: LED Par Can
• Type: PAR56
• Colour Range: RGB
• Number of LEDs: 9
• LED Type: 3 W TRI Colour
  
• Beam Angle: 25°
• DMX Input: XLR 3-pole
• DMX Output: XLR 3-pole
• DMX Mode: 6-channel
• DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
• Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
• Controls: Mode, Value Up, Enter, Value Down
• Indicators: LED Display
• Power Supply: 100 V AC - 250 V AC
   
• Power Consumption: 50 W
• Power Connector: Schuko
• Housing Material: Aluminium
  
• Housing Colour: Black
  
• Dimensions without mounting bracket): 230 x 250 x 260 mm

Info

light source: 12 led luxeon, 1W, declared life 100.000 hours flicker free suitable also for TV studio protection rating: IP20 and IP66 dimmer/strobe: full range dimming synchronized or random strobe effect colour: infinite colours generated by convergent RGB colour beams beam angle: standard 12° various frontal lenses and filters to adjust the beam angle are available upon request (from 30° to 110°) automated functions: 4 different automatic programs of colour changing and fading adjustable execution time program synchronized master/slave ability able to operate the internal programs and their parameters via DMX 512 user interface: binary dip-switches, all functions emulated by DR 1 communication protocol: DMX 512 standard + bi-directional (with DR 1) power requirements: 90-250V 50/60Hz autosensing 0,18A @ 230V - 0,45A @ 115V item codes: 9180 PinLite Led silver.

Info

EUROLITE LED panel 40