Content |
This 2-way passive full range studio monitor loudspeaker which incorporates an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency transducer. The system's low frequency driver is mounted as a direct radiator in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels. The tuning port is located at the rear to minimize turbulence noise and two M6 mounting points are located on the bottom panel of the enclosure. The acoustically transparent cloth grille system is detachable.
FEATURES: 2-way near/mid-field studio monitor 8" low frequency speaker 1" aluminum dome fluid cooled tweeter LQS? waveguide for dispersion control 125 W power handling
SPECIFICATIONS: RMS (Average) Power HandlingR:125 W Program Power HandlingP:250 W Peak Power HandlingK: >500 W Recommended Amplifier:125 W to 250 W at 8 Ω On-axis Frequency RangeF:38 Hz - 33 kHz Nominal Impedance: 8 Ω Minimum ImpedanceI:3.2 Ω (at 15 kHz) On-axis Sensitivity 1W / 1 mS: 89 dB SPL Rated Peak SPL at Full Power: 116 dB Nominal -6 dB BeamwidthsB:120° Horizontal (average, 500 Hz to 8 kHz) 95° Vertical Enclosure Material:MDF with Iroko wood side panels Color:Black/Iroko wood Connectors:Binding posts Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in) Mounting:2 x M6 points Weight: 12.8 kg (28 lbs) Shipping Weight: 14 kg (31 lbs) | 2-channel passive DI box for line and loudspeaker levels. PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Specifications
- No. of channels: 2
- Passive/Actibe: Passive
- Transformer balanced: Yes
- Attenuator: -30 dB
- Input/Output Gain: -20 dB
- Ground lift switch: Yes
- Max Input Level: +54 dBu
- Max Output Level: +4 dBu
- Frequency Range 2K Source Imp. -1dB: 10 Hz - 40 kHz
- Input Impedance 60Hz: 60 kΩ
- Nom. Output Impedance: 600 Ω
- Housing: Steel
- Dimension: 110 x 110 x 45 mm
|
Dimensions | Metric :6-15/16” W x 9-11/16” D x 10-11/16” H | 17.6 x 24.6 x 27.1 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/2" high definition bass/midrange driver pressure coupled to one 8” bass radiator
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 – 200 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Piano-Gloss Black
Included Accessories :Keyhole bracket (with 2 screws to mount to speaker)
Mounting Options :Vertically: On Shelf; On Wall with optional included keyhole bracket for flush mounting
Packaging :Two to a carton
Weight | Metric :14 lbs | 6.4 kg
Warranty :5 Years | JBL VRX 918S 18'' 1600W power rating continuous, High Power Flying passive Subwoofer
Key Features :
Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame.
18 inch, 2268H Differential Drive? woofer for extended low-frequency output
Large port area for reduced distortion
20 mm threaded pole socket for solid, secure satellite speaker mounting
Specifications:
|
|
|
Frequency Range |
: |
31 Hz ? 220 Hz |
Frequency Response |
: |
34 Hz ? 220 Hz |
Recommended Crossover Frequencies |
: |
80 Hz, 24 dB / octave HPF
80 Hz, 24 dB / octave LPF |
Power Rating (Continuous / Program / Peak) |
: |
800 W / 1600 W / 3200 W |
System Maximum SPL |
: |
130 dB SPL peak |
System Sensitivity |
: |
95 dB SPL |
LF Driver |
: |
1 x JBL 2268H 457 mm (18 in) Differential Drive woofer |
Nominal Impedance |
: |
8 ohms |
Active Tunings |
: |
Tunings available at www.jblpro.com |
Enclosure |
: |
Rectangular, 18 mm, 13-ply birch plywood |
Suspension / Mounting |
: |
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit |
Finish |
: |
Black DuraFlex? finish |
Grille |
: |
Powder coated, black, 16-gauge perforated steel with
acoustical transparent charcoal foam backing. |
Input Connectors |
: |
Neutrik? Speakon? NL-4 (x2) |
Dimensions (H x W x D) |
: |
508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in) |
Net Weight |
: |
37 kg (81 lb) |
Optional Accessories |
: |
SRX718S-CVR: Pull-over padded cover
SS4-BK: Adjustable, heavy-duty pole, M20 thread to
35 mm
WK-4: Caster kit
VRX-AF: Array Frame Kit
M-10 eyebolt kit |
|
ME 120
Enclosure Bass reflex type Power Handling Capacity Continuous pinknoise: 50W Rated Impedance 6 ohms Sensitivity 88dB (1W, 1m) Frequency Response 60 ? 18,000Hz Crossover Frequency ? Speaker Component 16cm cone-type (magnetically shielded) Input Terminals Screw terminals (compatible with a dual-banana plug), gold plated Finish Enclosure: MDF, black, paint Front grill: Cloth, black Dimensions 170 (W) ? 264 (H) ? 194 (D) mm Weight 3.6kg (per unit) Mounting Brackets (option) WCB-12, WCB-31, CMB-31 | Info
The first in JBLʼs new 7 Series line, the 705i and 708i models answer the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies developed for our flagship M2 Master Reference Monitor, 7 Series deliver detailed imaging, extended frequency response and remarkable output from compact enclosures. Centrally amplified and tuned, and easily installed, 705i and 708i are the heart of an elegant, scalable system for broadcast and post facilities working in immersive audio formats. |
Reviews
There are no reviews yet.