| Content |
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 15 X
Description The multi-talented prodigy in the PREMIUM PR:O family. The
Description housing shape enables the PR:O 15 X to be used as a main
Description PA or a monitor speaker.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 60 Hz ? 19 kHz
Frequency response @ -10dB 53 Hz- 19 kHz
Speaker 1x 15?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Rigging points side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD) 47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD) 18 1/2? x 24 1/4? x 17 1/2?
Weight 21.6 kg
Weight 47.52 lbs
|
Descriptions:
The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.
Applications:
Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
FEATURES:
Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction
Weight: 35
|
Color Black
Input Connections Parallel Neutrik® NL4
Speaker Type Fullrange
Frequency Response (-3 dB) 65 - 20000 Hz
Frequency Response (-10 dB) 45 - 20000 Hz
Internal Crossover Yes
Recommended High-Pass Frequency 45 Hz
Sensitivity 1 W/1 m 100 dB
Max. SPL/1m (calc) 133 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
Rotatable Horn No
System Power Handling (Continuous/Program/Peak) 500 Watts
LF Transducer SMX2151
HF Transducer DH3
Crossover Frequency 1750 Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6.2 Ω
Enclosure Material Plywood and MDF with EVCOAT
Flying No
Height 475 mm (18.7“)
Width 439 mm (17.28“)
Depth 655 mm (25.79“)
Weight Net 23.5 kg (51.81 lbs) |
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
| The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
|
PRICE PER UNIT
ADAMs A7 & A7X: the evolution of a legend The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level. Driver technology The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels. The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. | Mid-Woofer |
| | Number | 1 | | Basket Ø | 7" (175 mm) | | Voice coil Ø | 1.5" (38 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 100 W / 150 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 42 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.5 % | | Long term output | ≥106 dB | | Max. peak | ≥114 dB | | Crossover frequencies | 2500 Hz | | Input impedance | 30 KOhm | | Weight | 20.3 lb (9,2 kg) | | Magnetically shielded | No | | Height x Width x Depth | 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) | | Warranty | 5 Years |
| Delivery contents | | Power cord, Manual |
|
Reviews
There are no reviews yet.