Content |
With durable construction and unobtrusive appearance, the ES933ML offers versatile solutions for speech, theater, orchestra and choir sound reinforcement and recording. The microphone's low-profile element provides a uniform MicoLine polar pattern with narrow 90º acceptance angle. Available in two colors: black (ES933ML); white (ES933WML), the microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES933ML also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
- Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
- Small size and excellent response are ideal for suspension over choirs, instrumental groups and theater stages
- Low-profile element provides uniform MicroLine polar pattern with narrow 90º acceptance angle
- Available interchangeable elements permit angle of acceptance from 90º to 360º
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom power
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Available in two colors: black (ES933ML) and white (ES933WML)
- RoHS compliant - free from all substances specified in the EU directive on hazardous substances
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: MicroLine®
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa
- Impedance: 250 ohms
- Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 109 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
- Phantom Power Requiremens: 11-52V DC, 2 mA typical
- Switch: Flat, roll-off
- Cable: 15.2 m (50') long (permanently attached to microphone), 3.2 mm (0.13“) diameter, 2-conductor shielded cable, terminated with TA3F-type connector
- Accessories: ES933ML: AT8138 MicroLine foam windscreen; AT8452 steel hanger ES933WML: AT8138(WH) MicroLine foam windscreen; AT8452(WH) steel hanger Both: AT8538 power module
|
- PA microphone with rugged, all-metal body
- Frequency response optimized for intelligibility
- Long useful life even in tough day-to-day usage
- Frequency response tailored to speech use
Rugged, affordable dynamic cardioid gooseneck microphone for general public address and communications use. The DGN 99 provides a frequency response tailored to speech use for optimum intelligibility as well as good offaxis rejection for high gain before feedback and suppression of unwanted ambient noise. The all-metal body ensures a long useful life for the microphone even in tough day-to-day use.
The DGN 99 E features a built-in XLR connector for quick connection, while the DGN 99 has been designed for permanent (single-hole or screw-on) installation and comes with a 6-ft. 4-in. (2-m) fixed, unterminated cable.
Ticket window, bank counter
Reception desk, restaurant
Houses of worship
|
The evolution e 908 instrument microphone is available in four variants:
as e 908 D for drums and percussion
as e 908 B for wind instruments, congas, and drums with free-floating suspension system
as e 908 B ew for the wireless miking of saxophones using an evolution wireless instrument transmitter
as e 908 T ew for the wireless miking of trumpets using an evolution wireless instrument transmitter
- Pick-up pattern : cardioid
- Frequency response : 40 ... 20 000 Hz
- Sensitivity in free field, no load : (1kHz) 4 mV/Pa, 0,56mV/Pa (e 908T-ew)
- Equivalent noise level : e908B-ew = 30 dB(A); e908B & e908D = 35 dB(A), e908T-ew = 39 dB (A)
- Max. Sound pressure level (aktiv) : 147 dB
- Nominal impedance : 100 Ohm (e908B & e908D)
- Min. terminating impedance : 2000 Ohm (e908B & e908D)
- Phantom powering : 12 - 48 V / 3 mA (e908B & e908D)
- Weight : ca. 140 g
-
Dimensions : Ø 47 x 193 mm
|
Shure MX412SE/C 12-inch (30 cm) Gooseneck Condenser Microphone, Shock Mount, Flange Mount, 10-foot (3 m) Side-Exit Cable (or Bottom-Exit), Snap-Fit Foam Windscreen, In-Line Preamp, Cardioid.
Shure Microflex MX412SE/C microphones are miniature gooseneck-mounted electret condenser microphones designed for speech and vocal pickup. Their high sensitivity and broad frequency range make them suitable for recording, as well as sound reinforcement applications.
The MX412SE/C microphone can be screwed onto a mic stand or the supplied 5/8 inch 27-threaded flange. They can be easily changed from side-exit to bottom-exit to conceal the cable. All models include an in-line preamplifier and a 3 m (10 ft) cable. Each microphone is available with interchangeable cardioid, supercardioid, or omnidirectional cartridges. |
Recommended For:
- Brass
- Drums
- Percussions
- Woodwinds
Features:
- Miniature condenser clip-on microphone for wind instruments, drums, and percussions
- Miniature gooseneck for accurate microphone alignment
- Including wireless direct adapter for easy use with AKG pocket transmitters
- Detachable microphone cable
- Transducer shock mount for high mechanical-noise rejection
Standard Accessories:
- A400 adapter
- Microphone bag
- W44 Windscreen
Specs:
- Polar pattern cardioid
- Frequency range 60 Hz to 20 kHz
- Sensitivity 5 mV/Pa (-46 dBV)
- Max. SPL 130/132 dB SPL (for 1 %/3 % THD)
- Equivalent noise level 31 dB(A)
- Signal/noise ratio (A-weighted) 63 dB
- Impedance = 2000 ohms
- Current consumption
| Polar pattern Cardioid
Frequency range 70 to 18,000 Hz
Max. SPL 125 dB (for 1% THD)
Equivalent noise level 73 dB
Impedance =2,000 ohms
Supply voltage 9 to 52 V phantom power to IEC 61938 (DPA adapter integrated)
Powering |
Reviews
There are no reviews yet.