Content |
- Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
- 16 balanced high-headroom line inputs for individual stereo or mono use of each section
- Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
- Dedicated balance and level controls plus +4/-10 level selection per channel
- Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
- Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
- Monitor/FX signal assignable to phones output for added flexibility
- Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
- 1/4'' TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
- High-quality detented rotary controls for long-term reliability
- Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
- 3-Year Warranty Program*
- Designed and engineered in Germany
Audio Inputs |
Type: 16 x 1/4" / 6.3 mm TRS Connectors, Electronically Balanced, Line Level
Impedance: 20 Kilohms Balanced or Unbalanced
Gain Range: -∞ to +15 dB
Operating Level: +4 dBu / -10 dBV (Switchable)
Maximum Input Level: +22 dBu
Common-Mode Rejection CMRR at 1 kHz: >50 dB Typically |
Audio Outputs |
Main Out (L/R):
Type: 2 x 1/4" / 6.3 mm TRS Connectors, Impedance Balanced
Gain Range: -∞ to +15 dB
Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced
Maximum Output Level: +22 dBuMonitor Out Send (Mono):
Type: 1 x 1/4" / 6.3 mm TRS Connector, Impedance Balanced Mono
Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced
Maximum Output Level: +22 dBu |
Headphones Output |
Type: 1 x 1/4" / 6.3 mm TRS Connector, Stereo
Minimum Load Impedance: 100 Ohms |
System |
Bandwidth: 20 Hz to 20 kHz (±0.2 dB)
Frequency Range: 10 Hz to 200 kHz, (±3 dB)
Signal-to-Noise Ratio: THD: 0.003% at +4 dB input, 1 kHz Unity Gain
Crosstalk: |
Power Supply |
Voltage: 100 to 240 VAC, 50/60 Hz
Power Consumption: 15 W
Mains Connection: Standard IEC Connector |
Dimensions |
1.7 x 19.0 x 5.9" / 4.4 x 48.3 x 14.9 cm
Rack Space: 1 RU |
Weight |
4.0 lb / 1.8 kg |
|
VIRTUALIZER 3D FX2000
High-Performance 3D Multi-Engine Effects Processor
71 breathtaking new algorithms—true RSM (Real Sound Modeling) stereo and 3D effects
Wave-adaptive virtual Room reverb algorithms for natural reverb and delay
Awesome modulation, dynamic, psychoacoustic and EQ algorithms
Authentic amp simulation, distortion and special effects
11 effect combinations with selectable serial / parallel configuration
Up to 7 adjustable parameters plus 2-band EQ per effect
24-bit A/D and D/A converters with 64/128-times oversampling
True stereo processing for realistic channel separation in stereo image
100 factory presets plus 100 user memory locations
Extensive MIDI implementation
Accurate LED level meters for perfect level setting and optimum performance
Servo-balanced XLR and ¼'' TRS inputs and outputs
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Reverbs & Delays
Because it is one of the most desired effects, the FX2000 provides 12 different reverb programs, so you always have the ideal reverb for your live performance or studio needs.
Reverbs include:
CATHEDRAL
GOLD PLATE
SMALL HALL
ROOM
STUDIO
CONCERT
STUDIO
STAGE
SPRING REVERB
AMBIENCE
EARLY REFLECTIONS
Specialty reverbs include:
REVERB – reverb is synthetically turned off after a predetermined amount of time
REVERSE REVERB – reverb envelope is reversed—it slowly gets louder
Delays include:
STEREO DELAY – delay is processed across the entire stereo image
TAPE ECHO – simulates classic tape echo devices, pre-dating the advent of digital delays
PING PONG – delay signal is "bounced” from left to right at an adjustable tempo
Much More than Just Reverb and Delay
The FX2000 has some of the best-sounding reverb and delay programs, but thatʼs not all. It also provides excellent modulation effects (such as chorus, flanger and phaser), including special variations like musical pitch shifter, tremolo and even a rotary speaker simulation.
Modulation and Pitch Shifter FX:
STEREO FLANGER (originally generated by playing back two synchronized "reel to reel” tape recorders with a finger rubbing on the flange of one of the take-up reels)
VINTAGE FLANGER simulates a guitar fl anger stomp box
JET STREAM FLANGER sounds like a classic analog flanger
STEREO CHORUS (combines a slightly detuned signal with the original)
ANALOG CHORUS simulates a guitar chorus stomp box
VINTAGE CHORUS imitates a classic analog studio chorus
ULTRA CHORUS creates the sound of an eight person chorus
STEREO PHASER (combines a second, phaseshifted signal to the original)
VINTAGE PHASER represents a guitar phaser stomp box
DUAL PHASER processes the left and right channels separately
ROTARY (simulation of the rotating speakers typically used on an organ) – Slow or Fast
PITCH SHIFTER (changes the pitch of the original signal) – can be used to create harmonies with the original signal or replace it entirely with the altered pitch. Choices include stereo, two and three vocal pitch shifter
VIBRATO – the peak frequency of the tone is periodically and uniformly changed (quickly or slowly)
TREMOLO (common vintage guitar amplifier effect) – a fast or slow periodic variation in volume
AUTO PANNING – signal is automatically sent from one side of the stereo image to the other, either once or multiple times
Dynamic FX:
COMPRESSOR – reduces the dynamic range of the signal, maintains consistent signal level and thus avoids distortion associated with excessive input levels
EXPANDER – effectively broadens the dynamic range of source signals while reducing background noise
GATED REVERB – helps reduce background clutter by turning reverb off below a predetermined threshold level. Particularly effective on drum mics and vocals
ANA. KOMPR/LIM. — similar to COMPRESSOR but with Limiting functionality
ULTRAMIZER – analyses incoming signal and automatically applies compression across two independent frequency bands
DENOISER – eliminates or reduces noise and other interference
DE-ESSER – reduces or removes sibilance (Ssss sound) from signal
WAVE DESIGNER – allows you to influence the envelope by adjusting Attack and Release of the signal
Psychoacoustic FX:
EXCITER – adds artificially generated overtones to the original signal, increasing presence and perceived loudness without significant increase in signal level
ENHANCER – functions much like a dynamic pitch equalizer
ULTRA BASS – sub-harmonic processor combined with bass exciter and limiter
STEREO IMAGER – divides the signal into middle and side signals, allowing individual signals to be amplif ed when desired and placed on the stereo image
ULTRA WIDE – creates a broader stereo image
BINAURALIZER – also creates a broader stereo image and compensates for crosstalk between both speakers
Filter/EQ FX:
AUTO FILTER – influences the frequency response of a signal. Two filters are included: low pass allows low frequencies to pass and suppresses high frequency content; high pass does the exact opposite
LFO FILTER - Controls the rate of oscillation effects
PARAMETRIC EQ – allows you to control the bandwidth, frequency and amplitude of a signal
GRAPHIC EQ – the sound spectrum is divided into eight (8) adjacent frequency bands, which can be cut or boosted, bandwidth is predetermined
Distortion FX and Amp Simulations
The FX2000 is also equipped with distortion, amplifier and speaker simulation including VOCAL DISTORTION, TUBE DISTORTION, GUITAR AMP, TRI FUZZ, SPEAKER SIMULATION, RING MODULATOR and LO-FI.
Special FX:
VINYLIZER – adds clicks and/or noise to the signal, reminiscent of old vinyl records and tape machines
SAMPLER – allows you to record and playback up to five (5) seconds of program material
VOCODER – allows the input signal to modulate another signal (usually a synthesizer sound), creating the familiar "talking synthesizer” effect
VOICE CANCELER – removes mono vocal parts from stereo recordings for "instant Karaoke”
RESONATOR – simulates and oscillating system that amplifies a specific frequency
Our FX Combinations Go to 11
Sometimes you want to add a little (or a lot) of color to your reverb and delay patches. The FX2000 allows you to layer modulation effects like chorus, flanger, pitch or tremolo with your reverb or delay selections.
FX Combinations include:
Chorus & Reverb
Flanger & Reverb
Leslie & Reverb
Pitch & Reverb
Delay & Reverb
Tremolo & Reverb
Phaser & Reverb
Chorus & Delay
Flanger & Delay
Pitch & Delay
Tremolo & Delay
Enhanced User Editability
Logical grouping of parameters, along with the combination of encoders, buttons, LEDs and an easily readable LED display, make operating the FX2000 a breeze. You are free to edit up to seven parameters per preset, and then save them for future use in the 100 provided memory locations.
Value
With its extremely powerful processing capability and versatile array of features, the FX2000 will become the busiest tool in your audio arsenal. Stop by your BEHRINGER dealer today and find out why more professional sound engineers are turning to the FX2000 as their primary FX processor— both in the studio and on the road.
| High-Definition 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System
- Professional 31-band stereo graphic equalizer for live and studio applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
- Ultra-low noise 4580 operational amplifiers for highest signal integrity
- Dedicated mono subwoofer output with adjustable crossover frequency
- Additional sweepable high and low-cut filters for each channel remove unwanted frequencies, e.g. floor rumble, hiss etc.
- Highly accurate 12-segment LED input/output metering and input gain controls for easy level setting
- Relay-controlled hard-bypass with an auto-bypass function during power failure (fail-safe relay)
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- “Planet Earth" switching power supply for maximum flexibility (100
- 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
| Bring a more professional sound to your mix
Adding a dbx® 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments.
dbx knows compressors...after all we invented them! The 266xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Features
- Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Great sounding dynamics control for any type of program material
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Stereo or dual-mono operation
- Balanced inputs and outputs on 1/4" TRS and XLR connectors
- Side Chain insert
- Classic dbx® "Auto" mode
Specifications
Input Connectors |
1/4" TRS and female XLR (pin 2 hot) |
Input Type |
Electronically balanced/unbalanced, RF filtered |
Input Impedance |
40kΩ balanced/unbalanced |
Max Input |
>+22dBu Balanced or Unbalanced |
Output Connectors |
1/4" TRS, female XLR (pin 2 hot) |
Output Type |
Impedance-balanced/unbalanced, RF filtered |
Output Impedance |
+4dBu: 100Ω balanced, 50Ω unbalanced; -10dBu: 1kΩ balanced, 500Ω unbalanced |
Max Output |
>+21dBu balanced/unbalanced into 2kΩ or greater; >+18dBm balanced/unbalanced (into 600Ω) |
Sidechain |
1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) |
Sidechain Impedance |
Tip = >10kΩ (Input), Ring = 2kΩ (Output) |
Sidechain Max Input Level |
Tip = >+22dBu (Input) |
Sidechain Max Output Level |
Ring = >+20dBu (Output) |
Compressor Threshold Range |
-40dBu to +20dBu |
Compressor Threshold Characteristic |
Selectable OverEasy® or hard knee |
Compressor Ratio |
1:1 to Infinity:1 |
Compressor Attack Time |
Scalable Program-Dependent AutoDynamic™ |
Compressor Release Time |
Scalable Program-Dependent AutoDynamic™ |
Expander/Gate Threshold Range |
-60dBu to +15dBu |
Expander/Gate Ratio |
1:1 to 4:1 |
Expander/Gate Attack Time |
|
|
Innovation
The ARX AFTERBURNER? is a unique Multi Mode compressor/limiter designed for use in any professional audio dynamics control application. Multiple Modes The Afterburner can be set up and used in three different ways: In Two channel mode, it performs as two independent compressor/limiters, with 'industry standard' variable Threshold, Ratio and Output gain. In stereo mode, our New Adaptive Stereo Link circuitry provides increased stereo imaging accuracy when linking both channels as a stereo pair. A single front panel switch puts the Afterburner into its alternative Mono mode, setting it up as a Single channel, Dual Band compressor/limiter, with separate dynamics control of both Low and High frequencies, opening up a whole new range of gain control techniques. Enhance Switch In any mode, the Afterburner features an 'Enhance' switch, which provides frequency restoration to preserve the spectral balance of the audio signal, compensating for the sagging Low and High frequency response of compressed program material. Think of it as a 'smart' loudness control. Features Switchable Modes - Stereo; Dual Channel Single band; or Single Channel Dual Band (Low and High) Low and High frequency compression in Single Channel mode 'Enhance' switch restores spectral balance of compressed signal New Hard/Soft knee compression switch New Adaptive Stereo Link circuit for accurate stereo imaging New Above/Below Threshold LEDs enable at-a-glance compression confirmation Balanced XLR and Jack Inputs and Outputs Sidechain Insert points Intuitive user-friendly layout Flawless performance New Above/Below Threshold LEDs enable at-a-glance compression confirmation New Hard or Soft knee compression option New LED metering provides accurate Level status, with separate Gain Reduction metering in easy to read 'wide scale' meters. There is also comprehensive LED indication of all operating functions and status in any mode. Balanced Inputs and Outputs On the rear panel, each channel has true differential Balanced inputs and outputs, on both XLR and TRS jack connectors. As well, each channel has a TRS jack Sidechain access insert point, for applications such as De-essing (when used with an external equalizer such as the ARX Multi Q or EQ 260).Other features include a true Hardwire bypass switch for each channel, and passive RFI filters on the inputs. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch. With its smooth compression, intuitive user friendly layout, high density precision circuitry, and extensive user-variable operating parameters, the unique ARX Afterburner is equally at home in Studio, Installation, Broadcast and Sound Reinforcement environments. It can provide great sounding dynamics control effects that are not available with any other device. T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 22 dB CMRR >60 dB, 20 Hz-20 KHz Output Impedance Balanced 300 ohms, Unbalanced 150 ohms Output Level (Max) + 22 dB Frequency Response 20Hz to 20KHz ±0.2dB Signal to Noise ratio -93 dB Unweighted, -99 dB 'A' weighted Distortion .02% THD @ 0dB,1KHz Dynamic Range 115 dB Sidechain Insert Impedance 10 Kohm Filter Section Filter Type Phase corrected 6dB/octave Summed Filter Response ±0.2dB through crossover region Dividing Frequency 250 Hz Enhance Section Low Enhance 50 Hz, High Enhance 10 KHz Power Requirements 100/120 V AC, 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input/OutputConnector type XLR, Balanced Jack Sidechain Insert Connector TRS Jack
Front Panel Controls Hardwire bypass IN/OUT switch Threshold, Ratio and Output Gain controls Above/Below Threshold LEDs 12 segment LED Output Level display Numbered marker panel for labelling compressor assigns 7 segment LED Gain Reduction display Enhance switch and status LED Adaptive Stereo link switch and status LED Dual/Single channel mode switch and status LEDs Rear Panel Connectors Balanced Inputs and Outputs, on both XLR and TRS jack connectors. In Single channel (Mono) mode, use Channel 1 Inputs and Outputs only Sidechain Insert TRS connector on each channel AC input connector, with voltage switch and fuse. |
The DPR-504 is a 4-channel noise gate.
Each channel features: A parametric key filter with key filter listening. Simultaneous key level and threshold metering with average and peak metering. A gate status LED. A RELEASE/HOLD control (hold tracks proportionally with release times). Attack switchable auto/fast (auto tracks signal dynamics for optimum setting). Link (links two channels together). Key source allows external triggers.
The Range switch selects between 7OdB and 2OdB gating depth to provide alternative release profiles. The unit features electronically balanced inputs and outputs. |
Reviews
There are no reviews yet.