| Content |
Dimensions | Metric :6-15/16” W x 9-11/16” D x 10-11/16” H | 17.6 x 24.6 x 27.1 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/2" high definition bass/midrange driver pressure coupled to one 8” bass radiator
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 – 200 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Piano-Gloss Black
Included Accessories :Keyhole bracket (with 2 screws to mount to speaker)
Mounting Options :Vertically: On Shelf; On Wall with optional included keyhole bracket for flush mounting
Packaging :Two to a carton
Weight | Metric :14 lbs | 6.4 kg
Warranty :5 Years | Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
The TX1181 is the perfect companion sub to the TX1122 and TX1152 for compact and portable performance. Using the proven EVS18S woofer, the TX1181 effortlessly provides the low-frequency energy needed to keep up with Tour X boxes, as well as many other EV loudspeaker products. The integrated, low-pass input filter allows for single amp drive, and the high-sensitivity and excellent power handling don\'t require a large, expensive amplifier to generate high SPL.
The TX1181\'s unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated, screw-in-style pole-mount make the TX1181 easy to transport and employ in a variety of applications.
Specifications
| Frequency Response (-3dB) |
50 - 160 Hz |
| Frequency Response (-10dB) |
45 - 700 Hz |
| Recommended High-Pass Frequency |
30 Hz |
| Sensitivity 1W/1m |
100 dB |
| Max. SPL / 1m (calc) |
132 dB |
| System Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
| LF Transducer |
EVS18S |
| Nominal Impedance (Passive) |
8 Ohms |
| Minimum Impedance |
7.5 Ohms |
| Enclosure Material |
Plywood and MDF with EVCOAT |
| Color |
Black |
| Flying |
No |
| Input Connections |
Parallel Neutrik® NL4 |
| Internal Crossover |
Yes |
| Speaker Type |
Subs |
| Weight Net |
33.8 kg ( 74.52 lbs ) |
| Dimensions (HxWxD) |
769 x 439 x 591 mm
(30.28" x 17.28" x 23.27“) |
| Behringer DI-600P High-Performance Passive Direct Injection Box
Introducing the Ultra-Compact DI-Boxes from BEHRINGER
There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal.
The DI600P lets you connect instruments or amplifier outputs of up to 3,000 Watts. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies.
This is the sort of medicine that?ll cure headaches in your studio or on stage.
It often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the signal.
Hook Your Guitar or Amp Up to the PA
Be ready for your next gig with the Behringer Ultra-DI DI600P direct box. Designed to send instrument or amplifier signals to the main mixing board, the DI600P is a high-performance passive DI is a useful tool in any gig rig or studio. Dual 1/4" TS jacks are wired in parallel let you plug your instrument into one and use the other as an output to your amp. The balanced XLR mic-level output feeds your mixer a clean and super-flat signal that is true to the source. Sweetwater knows that grounding issues and hum can be a problem at live gigs. The DI600P sports a ground lift switch to kill unwanted ground loops and hum. It also has a filter switch for optimal guitar tone and an instrument/amp switch with a 30dB input level drop. The Behringer Ultra-DI DI600P direct box is an extremely useful tool for any stage rig!
Behringer Ultra-DI DI600P Direct Box Features:
- Compact, high-performance passive direct box
- Jack input 1/4" TS in and parallel out
- Gold-plated XLR output / impedance balanced
- Super-flat frequency output for uncolored sound
- Switchable filter that optimizes the DI for guitars
- Instrument/Amp switch lowers the input level 30dB for feeding amplifiers into the DI
- Instruments or amplifier outputs with up to 3,000 watts can be connected directly
- Offers impedance and signal matching of instruments to mixers
- Perfect for stage and studio use
- Ground lift switch eliminates typical ground loop problems
- Rugged metal case can take the rigors of the road
Get your signal to the board with Behringer\'s Ultra-DI DI600P direct box!
Tech Specs
- Type: Passive DI Box
- Channels: 1
- Ground Lift: Yes
- Inputs: 1 x 1/4"
- Outputs: 1 x 1/4“, 1 x XLR
- Height: 1.4"
- Width: 3.75"
- Depth: 5"
- Weight: 0.66 lbs.
- Manufacturer Part Number: DI600P
|
The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection. Connections are dual Neutrik Speakon and 1/4" jacks. With professional features, excellent sonic performance, and great value, Yamaha Club Concert Series loudspeakers deliver premium quality night after night.
The CW118V enclosure houses a powerful cast-frame 18" woofer with a frequency response of 30Hz - 2kHz. 600W program handling, 1,200W peak. Sensitivity: 96dB. 22“W x 32“H x 25“D. 71 lbs.
Yamaha CW118V 18" Club Concert Series Subwoofer Speaker Features:
- Tough, paintable exterior coating
- Cast-frame 18" woofer
- Frequency response of 30Hz-2kHz (-10dB)
- 600W program handling/1,200W peak
- Sensitivity: 96dB
- 22“W x 32“H x 25“D
| EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01") |
Reviews
There are no reviews yet.