Faital Pro FP3FE22A – 3″ Speaker 20 W 8 Ohm

Nominal Specifications

• Nominal Diameter 3“, 80 mm
• Overall Diameter 3.1“, 81 mm
• Bolt Circle Diameter 3.62“, 92 mm
• Baffle Cutout Diameter 2.9“, 73.6 mm
• Depth 1.55“, 46 mm
• Flange and Gasket Thickness 0.26“, 6.5 mm

• Minimum Impedance 6.2 Ohm
• Nominal Impedance 8 Ohm
• Nominal Power Handling*** 20 W
• Maximum Power Handling**** 40 W
• Sensitivity (1W/1m) 91 dB
• Frequency Range 100 - 20,000 Hz
• Voice Coil Diameter 0.75“, 19 mm
• Winding Material Aluminium
• Former Material Kapton
• Winding Depth 0.26“, 5 mm
• Magnetic Gap Depth 0.2“, 4 mm
• Flux Density 1.5 T

• Resonant Frequency (fs) 110 Hz
• DC Resistance (Re) 6.2Ohm
• BL Product (BL) 4.5N/A
• Diaphragm Mass inc. Airload (Mms) 2.4 grams
• Mechanical Compliance of Suspension (Cms) 0.7 mm/N
• Rms 0.35 Kg/s
• Electromagnetic Q (Qes) 0.5
• Mechanical Q (Qms) 5
• Total Q (Qts) 0.45
• Compliance Equivalent Volume (Vas) 0.03 ft³, 0.95 dm³
• Surface Area of Cone (Sd) 4.5“², 29.4 cm²
• Maximum Linear Excursion (Xmax)* 1.8 mm
• Xdamage** 7.3 mm
• Coil Inductance (Le) 0.15 mH
• Diaphragm mass (Mmd) 2.3 g
• Eta Zero 0.28 %

Notes

• *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
• **Maximum excursion before permanent damage
• ***2 Hours Test According to AES 2-1984 Rev. 2003
• ****Maximum power is defined as 3dB greater than nominal power

• 90 dB sensitivity 1 W 11m
• 130 W + 25 W Power handling
• 1.5" + 1" voice coil
• Single point source providing coherent wave front
• 900 conical dispersion
• Optimal for compact 2-way systems

JBL Control 24 Series Driver Description: This (MPN 124-13000-00) is a replacement JBL Control 24 series coaxial driver.

This is a replacement JBL Control 24 series coaxial driver. It has a set of input spades for the LF part and a separate pair of wires exiting thru the back of the magnet to reach the voice coil of the HF unit. Compact and tough, a mighty reproducer in a small package. Remember, it does not include a crossover network. It is intended as a replacement for a blown unit in a JBL Control 24 series unit...you hobbiests will have to provide the external crossover that is already in the Control 24 mounting container. The opening for a front load is 3.5+" with the overall depth of 4" and 3.16" remaining under the baffle. It is a genuine replacement part and it is shipped to you sealed just the way we get it from JBL.

Product type Loudspeaker Chassis