Content |
Well equipped to handle the daily grind and time constraints of touring: That\'s the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary. Product type Type Tubing material Tubing colour Tubing surface Min height Max height Transport length Height adjustment Base material Material of height adjustment Dimensions Base (W x H x D) Base weight Max. load capacity Weight |
The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport. Product type Type Tube material Tubing colour Tubing surface Min height Max height Transport length Height adjustment Number of extensions Base material Material of height adjustment Dimensions Base (W x H x D) Base weight Interchangeable rings Black ring pack included Max. load capacity Weight | - Adjustable height: 1450-3500mm
- Load capacity: 50kg |
- Set of 4 Vari-Poles® in heavy duty carry bag
- Lightweight aluminium Vari-Pole® construction
- Variable length from 210 cm to 370 cm
- Bag of durable, water-repellent 600D nylon
- 10 mm foam padding and padded dividers
This set includes 4 Gravity Vari-Poles® made of lightweight, black anodized aluminium tubing with continuously variable length from 210 cm to 370 cm. They come in a dedicated heavy duty Vari-Pole® carry bag of water-repellent 600D nylon with 10 mm padding providing protection from bumps and dents. Padded dividers keep the clamping poles separate to prevent scratches, an interior mesh pocket offers plenty of space for accessories.
Product type
Stands and Tripods
Colour
Black
Weight
14,5 kg
GBGVARIPOLE4B - Gravity BG VARI-POLE 4® Transport Bag for 4 Gravity Vari-Poles®
Product type
Stands and Tripod Accessories
For number of stands
4
Type
Transport bag
For type of stand
Clamping rod
Colour
Black
Material
Nylon 600D
Thickness of the padding
10 mm
Latch
zip
Width
2150 mm
Height
430 mm
Depth
120 mm
Weight
3,5 kg
GLSVARIPOLE01B - Gravity LS VARI-POLE 01 B Clamping Pole Vari-Pole®, 2.10 - 3.70 m
Type
Clamping rod
Material
Aluminum
Tubing surface
anodized
Connection Surface
Powder coated
Transport length
2100 mm
Clamping Range
2100 - 3700 mm
Upper Tube Diameter
40 mm
Lower Tube Diameter
45 mm
Weight
2,2 kg
|
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don\'t need a clavilux, just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes. As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Product type Type Material Surface Color Fitting Length Stud spacing Max. load capacity Weight | The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.
Product type
Stands and Tripods
Type
Lighting Stands
Tube material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
1420 mm
Max height
2420 mm
Transport length
1420 mm
Height adjustment
set screw and safety pin
Number of extensions
1
Base material
Steel
Material of height adjustment
Steel
Tube diameter
35 mm
Dimensions Base (W x H x D)
563 x 563 x 15 mm
Base weight
14 kg
Interchangeable rings
1 x 30 mm
Black ring pack included
Yes
Max. load capacity
20 kg
Weight
17,8 kg |
Reviews
There are no reviews yet.