Content |
Size
Height: 5.4 inches (140 mm)
Width: 3.5 inches (90 mm)
Depth: 2.3 inches (60 mm)
Weight
Weight: 0.92 lb. (0.42 kg)
Construction
Two part dies cast metal
Rubberized base
Connections
Analog Inputs
Connectors, balanced: Mic.: XLR
Mic Input Level @ 0 dBFS: -42dBu to +1dBu
EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu
Mic input SNR: >104 dB
Guitar Input impedance: 1 MOhm
Guitar Input Level @ 0 dBFS: -7 dBU to 17 dBu
Guitar Input SNR: >115dB
Analog Outputs
Output Impedance, Bal./Unbal.: 200/100 Ohm
Output Full Scale: +1 dBu
Dynamic Range: >104 dB, 20 Hz to 20 kHz
Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
Control
USB for firmware and control
Mic Control using TC-Helicon MP-75
Details
Power
Power Supply (Supplied): 12V .4A
Power Consumption: 5.6W
Safety
EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
Operating Requirements
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -22°F to 167°F (-30°C to 70°C)
Humidity: Max. 90 % non-condensing
Included with VoiceTone H1
Region specific power supply
USB cable
User guide
1 year warranty parts and labor
| User´s Manual
LD Systems FX 300
2-Channel Pedal with 16 Digital Effects
- Microphone input for dynamic and condenser microphones
- 16 digital effect presets in 16-bit quality
- Low-noise instrument input with high input impedance for acoustic guitars, bass guitars or other instruments
- Separate FX sends for both channels, additional FX loop for the instrument input
- HPF and +48 V phantom power for microphone input
- Signal/peak LEDs for both channels and clip LED for the effects
- FX MUTE pedal for muting effects
- MUTE ALL pedal for muting outputs
- Balanced and unbalanced output
- Operated on 9 V battery or optional power supply (LDFX300PS)
For a singer-songwriter performing on stage or giving a concert in a living room, sound is everything.
LD Systems FX 300 will blow you away right from the moment you start your show, even if you\'ve had little to no time to carry out a soundcheck. This small yet handy device not only serves as an effect pedal for altering the sound of your voice and instrument but is also an easy-to-use two-channel mixer. Its best feature by far are the pedals that let you control the mute functions with your feet or hand. And if you\'ve got something to say, you can simply mute all effects with the FX MUTE pedal so your voice can be heard loud and clear without any reverb or delay and everyone in the room can understand your message. To prevent the signal of your microphone or instrument from reaching the outputs, all you need to do is tap the MUTE ALL pedal - a lifesaver during breaks or when wrapping up your set.
The FX 300 is outfitted with 16 digital effects presets in 16-bit quality, two inputs with a separate gain setting and a balanced and unbalanced output. The +48 V phantom power provided at the microphone input allows condenser microphones to be used in addition to dynamic microphones. The high-impedance, low-noise instrument input is not only great for acoustic or bass guitars but also for all other instruments. Plenty of headroom ensures you no longer have to worry about distorted signals. And with a 9 V battery that lasts up to five hours, LD Systems FX 300 has got you covered even if there\'s no outlet in sight.
Product type
Artist Pedal
Type
Home-Recording , Live
Channels
2
Microphone channels
Microphone channels
1
Mic inputs
XLR/6.3 mm jack
Frequency Response Microphone Channel
50 - 20000 Hz
Amplification range Microphone channel XLR input
42 dB
Mono Mic Input Input THD-N | VoiceTone E1 offers singers the signature echo and slapback effects that evoke classic songs while putting effects control at their feet. Now, high quality, immersive echo effects for the stage are no longer just for guitarists.
Adds a wide range of echo effects for more depth in your vocals
Footswitch tapping can set echo times to song tempo
High quality signal path and tough enclosure
Can be chained to additional VoiceTone Singles
Mic-Control offers remote on/off via TC-Helicon MP-75 microphone
12 Flavors of Echo & Delay types:
Slap echo 1 & 2
Tap – 1/4, 1/8, Triplet 1/8th, Dotted 1/8th, Triplet 1/4, Dotted 1/4 notes
Echo FX 1 & 2
Filter control (smart EQ band limiting)
Powerfully easy
From Rockabilly-style "tape slap” echo to trance-inducing long echo trails timed to your songʼs tempo, VoiceTone E1 can excite your vocals and your audience more than ever before. And itʼs so easy to use; leave it on one setting throughout your performance or change it up for different songs. When itʼs time to talk to your audience, clear, dry banter is just a footswitch tap away.
As simple as plugging in your mic
Gaining access to the studio quality sounds and intelligent processing of VoiceTone singles is as simple as plugging in your mic and turning the effect on. Of course, you can always change the style or the amount of effect, but you shouldnʼt need to unfold the manual unless youʼre making a fire.
Strong family genes
Each VoiceTone single shares the same genes: a clean, quiet mic preamp that rivals high-end touring mixers, a die-cast metal case, rubberized no-slip base, studio quality analog to digital conversion, and the same quality processing youʼd expect from our flagship vocal processors like VoiceLive 2.
- See more at: http://www.nakas.gr/ecomnakas/nakas2006/default.asp?static=421&product=133028#sthash.cRLFG5bn.dpuf |
1215 Dual 15-Band Graphic Equalizer
The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
|
Whether youʼre at the top of the charts – or just a dreamer with a microphone, VoiceLive Play gives you hundreds of song & artist presets to choose from, helping you create amazing vocals. Plug in your MP3 player and sing along with your favorite tracks or create instant HIT effects for your own songs.
200+ song & artist inspired presets
Plug in your MP3 player to the AUX input and sing along using Vocal Cancel feature
RoomSense – embedded mics set auto key for harmonies
Sound Like The Pros
Producers spend more time on perfecting vocals than any other instrument, and the number of layered vocal tracks on a studio recording often run well into the double-digits. Now the same care for creating vocals live or at home is available to everyone.
VoiceLive Play gives singers the opportunity to experience the sound they know and love from their favorite songs with ease. Featuring automatic backing harmonies, vocal double tracking, pristine EQ and compression, lush reverbs, hard-tuned robo-voice – all the the goose-bumps-on-your-arm effects that make todayʼs Billboard hit vocals "pop”.
Pick a Genre, any Genre
Operating and navigating VoiceLive Play is a breeze. The GENRE button allows you to easily browse hundreds of presets. Choose a style that suits you and VoiceLive Play will list the presets that fit your preference. If youʼve never used effects before, youʼll quickly learn how to find the sound youʼre looking for with GENRES.
Download More & Make Your Favorites
If hundreds of presets wasnʼt enough, youʼll be able to download new and exciting artist presets each month for free via VoiceSupport.
Should you want to create your own presets, VoiceLive Play offers the simple and intuitive onboard controls to do so. In addition, you can mark any preset as a FAVORITE, creating a personal genre of choice effects for super-fast access.
Control
200+ Song & Artist Inspired Presets
Preset Up/Down and HIT Footswitch
Graphics LCD Display
Bump-Protected Mic Level
Dual-Colour Backlit Buttons
Dedicated Effect Block On/Offs
Size
Height: 1.8 inches (45 mm)
Width: 7.9 inches (200 mm)
Depth: 6.1 inches (156 mm)
Weight
Weight: 2.1 lb. (0.95 kg)
- See more at: http://www.nakas.gr/ecomnakas/nakas2006/default.asp?static=421&product=133031#sthash.FMfwOozB.dpuf
|
- Switchable polarity
- Cable length: 1.8 m
|
Reviews
There are no reviews yet.