The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W […]
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed ‘from the ground up’ in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code:
37687 / 37905 White
Configuration:
2 way
Built-in amplifier LF/HF:
80/40 W RMS
Built-in amplifier peak LF/HF:
160/80 W
Frequency response:
80Hz – 20KHz -6dB
Low Frequency woofer:
5 – 1 coil inch
High Frequency driver:
1 dome – 0.75 coil inch
Maximum SPL cont/peak:
113 / 117 dB
Dispersion:
90° x 90° HxV
Input impedance:
22 Kohm
Crossover Frequency:
3.5 KHz
AC Power requirements:
75 VA
Input connector:
XLR combo with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
170x275x180 – 6.69×10.82×7.08 mm/inch
Net Weight:
3.4 / 7.49 Kg/lb
Transport Dimension (WxHxD):
240x345x235 – 9.44×13.58×9.25 mm/inch
Transport Weight:
4.2 / 9.25 Kg/lb
Weight
4.00 kg
Reviews
There are no reviews yet.
Be the first to review “FBT JOLLY J5A Active Speaker 2-way 120W” Cancel reply
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code:
37687 / 37905 White
Configuration:
2 way
Built-in amplifier LF/HF:
80/40 W RMS
Built-in amplifier peak LF/HF:
160/80 W
Frequency response:
80Hz - 20KHz -6dB
Low Frequency woofer:
5 - 1 coil inch
High Frequency driver:
1 dome - 0.75 coil inch
Maximum SPL cont/peak:
113 / 117 dB
Dispersion:
90° x 90° HxV
Input impedance:
22 Kohm
Crossover Frequency:
3.5 KHz
AC Power requirements:
75 VA
Input connector:
XLR combo with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
170x275x180 - 6.69x10.82x7.08 mm/inch
Net Weight:
3.4 / 7.49 Kg/lb
Transport Dimension (WxHxD):
240x345x235 - 9.44x13.58x9.25 mm/inch
Transport Weight:
4.2 / 9.25 Kg/lb
SDQ5PIR is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.
The SDQ5PIR set can be controlled from the included infrared remote control, via serial commands or via the Apart wall control panels (ACP, ACPL or ACPR) which allow control of power and volume. ACPL and ACPR also allow the addition of external audio inputs. Teachers, lecturers or anyone who is giving a presentation can stop worrying about audio system problems and stay focused on their presentation.
All inputs can be gain adjusted, used individually or mixed together. The balanced input allows long signal line without
The XP308i from Samson is a compact and portable PA system that includes two 2-way speakers and an 8-channel mixer. Designed with mobility in mind, all of the system components connect together into a single case for terrific portability.
Each of the speakers features an 8" woofer and a 1" titanium tweeter, housed inside a durable vented enclosure. The removable 8-channel mixer features a powerful and efficient 300W Class-D amplifier for powerful sound reproduction. It offers 4 mic/line inputs capable of delivering phantom power, as well as 2 stereo inputs. An integrated iPod dock lets you easily drop in an iPod for playing back pre-recorded material. Dual 3.5mm outputs provide convenient monitoring via headphones or additional speakers. RCA outputs let you connect additional speakers or a recorder.
Other useful features of the XP308i include separate bass and treble controls for each input, a music/speech switch for setting system EQ, and an internal effects processor, which can add digital reverb to any mic channel. A 6-segment LED meter with a limit indicator makes it easy to monitor levels at a glance.
Compact and portable design
Pair of 2-way speakers, each with an 8" woofer and 1" titanium tweeter
Powerful and efficient 300W Class-D amplifier
Removable 8-channel mixer with 4 mic/line inputs and 2 stereo inputs
Phantom power available for powering condenser microphones
Integrated iPod dock accommodates most iPod models
RCA and 3.5mm outputs make it easy to connect additional speakers, a recorder, or headphones
Individual bass and treble controls on each input
Music/speech switch for setting system EQ
Internal effects processor for adding reverb to mic channels
The LD Systems Roadman 102 is a mobile and compact sound system
The Roadman 102 is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit with handheld mic. A second wireless microphone unit are also available in option.
Product type
Battery-powered PA speaker
Type
Set with Handheld Transmitter
Low/mid driver dimensions
10 "
Woofer Size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
80 W
Peak power
320 W
Frequency response
70 - 16.000 Hz
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-link set (master / slave) , Audio-link slave volume , Bass , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Value Down , Voice priority on / off , Volume Mic 1 , Volume Mic 2
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
3
Line input connectors
2 x RCA , Audio-link input XLR, female
Mic inputs
2
Mic inputs
6.3 mm Jack , XLR
Line outputs
3
Line output connectors
2 x RCA , Audio-link output XLR, male
Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched
Speaker output connections
6.3 mm Jack
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Cabinet material
aluminium , plastic
Cabinet construction
vented
Width
355 mm
Height
610 mm
Depth
315 mm
Weight
19 kg
Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Cassette player available optionally , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 100W Class D
Frequency Range 55Hz-20kHz (-10dB)
Crossover Frequency 1.5kHz
Maximum Peak SPL 124dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly, Wedge
Inputs 1 x XLR
Outputs 1 x XLR
Height 24“
Width 15.2“
Depth 15“
Weight 50 lbs.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Frequency list
Reviews
There are no reviews yet.