Content |
INPUT: 1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS: 4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH: 40MHz to 3000MHz (+/-3dB).
COUPLING: AC.
RF GAIN: +6dB typical across band.
NOISE FIGURE: 3.5dB.
POWER SOURCE: 12V DC, 80mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.32kg (0.71lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
INPUTS: 8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS: 8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION: 10-bit or 8-bit, automatic according to input resolution.
SWITCHING: During vertical interval from analog sync.
STANDARDS: 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION: Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS: 22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY: Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE: Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 3.5kg (7.8lbs) approx.
ACCESSORIES: Power cord.
|
INPUT: 1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs: 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB): 100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN: 0.7% (YC to CV,NTSC).
DIFF. PHASE: 0.15 Deg. (YC to CV, NTSC).
K-FACTOR: 0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO: 72 dB in both direction, (PAL).
CONTROL: Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE: 12V DC, 200mA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.64kg (1.4lbs) approx.
ACCESSORIES: 12V DC power supply.
OPTIONS: RK-1 19” rack adapter.
|
INPUT: 4 video, 1Vpp/75Ω on BNC connectors.
OUTPUT: 1 composite or single component video, 1Vpp/75Ω on a BNC connector.
BANDWIDTH (-3dB): 400MHz.
SWITCHING SYSTEM: Mechanical, break-before-make.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
Input 1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs 4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution 8 or 10-bits, automatic.
Operation Standards 143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking Automatic up to 30dB of cable loss.
Display Power ON LED.
Dimensions (w,d,h) 12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight 0.3kg. (0.67 lbs.) approx.
Power Source 12VDC, 250 mA.
Options RK-T1, RK-T3 rack adapters.
|
INPUT: Fiber optic ST connector, G62.5/125um (recommended) or G50/125um multimode fiber optic cable.
OUTPUT: Composite Video 1Vpp/75Ω on a BNC connector.
OPERATION DISTANCE: Up to 5km (MultiMode).
VIDEO BANDWIDTH (-3dB): 55 MHz. 20 MHz.
DIFF. GAIN: 0.4%.
VIDEO S/N RATIO: 60 dB.
NON-LINEARITY: 0.6%
POWER SOURCE: 12V DC 80mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
WEIGHT: 0.27 kg. (0.59 lbs.) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
Reviews
There are no reviews yet.