KRAMER VP-200N 1:2 Computer Graphics Video Distribution Amplifier

133.87 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
1:2 XGA DA. DC COUPLED. SELECTABLE SYNC IMPEDANCE. INCLUDES 3′ VGA CABLE. The VP-200N, VP-300N, and VP-400N are high performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input, provides correct buffering and isolation, and distributes the signal to two, three, or four identical […]

 

Read more

1:2 XGA DA. DC COUPLED. SELECTABLE SYNC IMPEDANCE. INCLUDES 3′ VGA CABLE. The VP-200N, VP-300N, and VP-400N are high performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input, provides correct buffering and isolation, and distributes the signal to two, three, or four identical outputs.

    * High Bandwidth – 400MHz (- 3dB).
    * HDTV Compatible.
    * ID Bit Control.
    * Advanced Sync Processing – Ensures compatibility with a wide range of computers.
    * Selectable Sync Input Impedance – 75? (video), 510? (Graphics/TTL).
    * 3ft 15-pin HD Cable Included.
    * Compact Size – Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

INPUT:1 analog red, green, blue signals – 0.7 Vpp/75?, H & V sync, TTL level, on HD15F connectors.OUTPUTS:2 analog red, green, blue signals – 0.7 Vpp/75? H & V sync, TTL level, on HD15F connectors.MAX. OUTPUT LEVEL:1.8 Vpp.BANDWIDTH (-3dB):400MHz.DIFF. GAIN:0.03%.DIFF. PHASE:0.07 Deg.K-FACTOR:0.05%.S/N RATIO:72dB.CONTROLS:Pair of switches for Hs (Horizontal Sync) and Vs (Vertical Sync) on the underside; ID Bit switch on the underside.COUPLING:DC.POWER SOURCE:12 VDC, 95 mA.DIMENSIONS:12cm x 7.5cm x 2.5cm (4.7′ x 2.95′ x 0.98′), W, D, H.WEIGHT:0.3 kg. (0.67 lbs.) approx.ACCESSORIES:Power supply, mounting bracket.OPTIONS:19′ rack adapters RK-T1, RK-T3.

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “KRAMER VP-200N 1:2 Computer Graphics Video Distribution Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

KRAMER VP-200N 1:2 Computer Graphics Video Distribution Amplifier removeKRAMER 707 Composite Video & Mono Audio over Twisted Pair Transmitter removeKRAMER 4x1V 4x1 Composite Video Switcher removeKRAMER SD-7108 1:8 SDI Distribution Amplifier removeKRAMER 105V 1:5 Composite Video Distribution Amplifier removeKRAMER VA-11 Composite Video & Stereo Audio Combiner remove
NameKRAMER VP-200N 1:2 Computer Graphics Video Distribution Amplifier removeKRAMER 707 Composite Video & Mono Audio over Twisted Pair Transmitter removeKRAMER 4x1V 4x1 Composite Video Switcher removeKRAMER SD-7108 1:8 SDI Distribution Amplifier removeKRAMER 105V 1:5 Composite Video Distribution Amplifier removeKRAMER VA-11 Composite Video & Stereo Audio Combiner remove
Image
SKUVP-200N7074X1VSD-7108105VVA-11
Rating
Price 133.87 incl. GR VAT 158.78 incl. GR VAT 146.34 incl. GR VAT 1,055.51 incl. GR VAT 183.71 incl. GR VAT 607.15 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

1:2 XGA DA. DC COUPLED. SELECTABLE SYNC IMPEDANCE. INCLUDES 3' VGA CABLE. The VP-200N, VP-300N, and VP-400N are high performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input, provides correct buffering and isolation, and distributes the signal to two, three, or four identical outputs.

    * High Bandwidth - 400MHz (- 3dB).
    * HDTV Compatible.
    * ID Bit Control.
    * Advanced Sync Processing - Ensures compatibility with a wide range of computers.
    * Selectable Sync Input Impedance - 75? (video), 510? (Graphics/TTL).
    * 3ft 15-pin HD Cable Included.
    * Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

INPUT:1 analog red, green, blue signals - 0.7 Vpp/75?, H & V sync, TTL level, on HD15F connectors.OUTPUTS:2 analog red, green, blue signals - 0.7 Vpp/75? H & V sync, TTL level, on HD15F connectors.MAX. OUTPUT LEVEL:1.8 Vpp.BANDWIDTH (-3dB):400MHz.DIFF. GAIN:0.03%.DIFF. PHASE:0.07 Deg.K-FACTOR:0.05%.S/N RATIO:72dB.CONTROLS:Pair of switches for Hs (Horizontal Sync) and Vs (Vertical Sync) on the underside; ID Bit switch on the underside.COUPLING:DC.POWER SOURCE:12 VDC, 95 mA.DIMENSIONS:12cm x 7.5cm x 2.5cm (4.7' x 2.95' x 0.98'), W, D, H.WEIGHT:0.3 kg. (0.67 lbs.) approx.ACCESSORIES:Power supply, mounting bracket.OPTIONS:19' rack adapters RK-T1, RK-T3.

INPUTS:     1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector      
OUTPUT:     1 balanced, 150Ω on a 6/4 standard telephone socket.      
BANDWIDTH (PAIR):     Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors      
NON-LINEARITY (PAIR):     Less 0.2% at short distances      
DIFF. GAIN (PAIR):     0.41%.      
DIFF. PHASE (PAIR):     0.3 Deg.      
K-FACTOR (@ 20m, PAIR):     0.1%.      
S/N RATIO (PAIR):     72 dB.      
CONTROLS:     Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.      
POWER SOURCE:     12 VDC 40mA.      
DIMENSIONS:     12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)      
WEIGHT:     0.28 kg. (0.62 lbs.) approx.      
ACCESSORIES:     Power supply, mounting bracket.      
OPTIONS:     Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters

INPUTS:    4 video, 1Vpp/75Ω on RCA connectors.
OUTPUT:    1 composite or single component video, 1Vpp/75Ω on an RCA connector.
BANDWIDTH (-3dB):    400MHz.
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

Input    SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs    8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output    ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution    10-bit or 8-bit, automatic according to input resolution.
Standards    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization    Automatic for up to >30dB cable loss.
Power Source    100-240V AC, 50/60Hz, 14VA.
Dimensions     19" x 7" x 1U W, D, H, rack mountable.
Weight     2.5kg (5.5lbs) approx.
Accessories    Power cord.

INPUT:    1 video, 1Vpp/75Ω on an RCA connector.
OUTPUTS:    5 video, 1Vpp/75Ω on RCA connectors.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    400MHz.
DIFF. GAIN:    0.1%.
DIFF. PHASE:    0.15Deg.
K-FACTOR:   

COMPOSITE & AUDIO COMBINER ON SINGLE COAX The VA-11 is a high performance combiner of composite video and unbalanced stereo audio signals. It combines the composite video and stereo audio into a single signal which allows the use of a single coax cable, which can then separates it back into composite video and stereo audio when used with the VA-12 separator.

    * Bandwidth - 7MHz (- 3dB).
    * Inputs - 1 composite video and 1 unbalanced stereo audio.
    * Outputs - 1 single signal of the combined audio and composite video.
    * Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-50RN.

INPUTS:1 composite video, 1Vpp/75? on a BNC type connector.1 stereo audio, 1Vpp/10k? on RCA connectors.OUTPUT:1 mixed signal 1Vpp/75? on a BNC connector.BANDWIDTH (-3dB):7 MHz.DIFF. GAIN:0.4 %.DIFF. PHASE:0.17 Deg.VIDEO S/N RATIO:72 dB.POWER SOURCE:230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.1 VA.DIMENSIONS:16.5cm x 12cm x 4.5cm (6.5' x 4.7' x 1.8', W, D, H.).WEIGHT:0.78 kg. (1.7 lbs.) approx.ACCESSORIES:Power cord.OPTIONS:RK-50RN 19' rack adapter.

Weight0.30 kg0.27 kg0.28 kg2.50 kg0.28 kg0.78 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 0.27 kg
Weight 0.28 kg
Weight 2.50 kg
Weight 0.28 kg
Weight 0.78 kg