Content |
1:3 COMPOSITE DA The Kramer VM-3Vxl is a distribution amplifier for composite or SDI video signals. It will take one input, provide correct buffering and isolation and distribute the signal to three identical outputs.
* High Bandwidth - 430MHz (- 3dB).
* Selectable Input Signal Termination.
* Desktop Size - Compact size. Three units can be rack mounted side-by-side in a 2U rack space with the optional RK-SM adapter.
INPUT:1 composite video, 1Vpp/75?, on a BNC connector.OUTPUTS:3 composite video, 1Vpp/75?, on BNC connectors.MAX. VIDEO OUTPUT:2Vpp.VIDEO BANDWIDTH (-3dB):430MHz.DIFF. GAIN:0.05 %.DIFF. PHASE:0.13 Deg.K-FACTOR: |
INPUT: 1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS: 2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors.
MAX. OUTPUT LEVEL: 1.4Vpp.
VIDEO BANDWIDTH (-3dB): 160MHz (Y).
NON-LINEARITY: 0.05%.
DIFF. GAIN: 0.08%.
DIFF. PHASE: 0.08Deg.
K-FACTOR: 0.1%.
VIDEO S/N RATIO: Better than 80dB (Y channel).
POWER SOURCE: 12V DC, 60mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
INPUT: 1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS: 4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH: 40MHz to 3000MHz (+/-3dB).
COUPLING: AC.
RF GAIN: +6dB typical across band.
NOISE FIGURE: 3.5dB.
POWER SOURCE: 12V DC, 80mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.32kg (0.71lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
INPUT: 1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs: 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB): 100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN: 0.7% (YC to CV,NTSC).
DIFF. PHASE: 0.15 Deg. (YC to CV, NTSC).
K-FACTOR: 0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO: 72 dB in both direction, (PAL).
CONTROL: Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE: 12V DC, 200mA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.64kg (1.4lbs) approx.
ACCESSORIES: 12V DC power supply.
OPTIONS: RK-1 19” rack adapter.
|
Input Composite video, 1Vpp/75? on a BNC connector.
Output Optic Fiber ST connector.
Operation Distance Up to 5km (MultiMode).
Video Bandwidth (-3Db) 55 MHz. 20 MHz.
Diff. Gain 0.4%.
Video S/N Ratio 60 dB.
Non-Linearity 0.6%
Power Source 12 VDC 80mA.
Dimensions 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
Weight 0.27 kg. (0.59 lbs.) approx.
Accessories Power supply, mounting bracket.
Options RK-T1, RK-T3, 19” rack adapters.
|
INPUTS: 8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS: 8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION: 10-bit or 8-bit, automatic according to input resolution.
SWITCHING: During vertical interval from analog sync.
STANDARDS: 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION: Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS: 22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY: Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE: Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 3.5kg (7.8lbs) approx.
ACCESSORIES: Power cord.
|
Reviews
There are no reviews yet.