| Content | Passive subwoofer
- 320 mm woofer, 100 mm voice coil
- Continuos power output: 500W RMS
- Frequency response: 50 - 120 Hz
- Sensitivity: 97 dB
- Impedance: 8 Ohm
- Speakon input
- Speakon output
- Wooden cabinet
- Dimensions: 42*46.5*53cm
- Weight: 25kg
- Package: 1 piece each box |
FB-120B
Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W
Impedance: 8Ω
Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field
Frequency Response: 40Hz-1.2kHz (+/-10dB)
Dimensions: 16“?16“?17.75" (W?H?D)
Weight: 15kg |
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
| MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
| Acoustical Specifications |
| Type Of Speaker: |
“band-pass" subwoofer |
|
| Frequency Response: |
70 Hz |
÷ 220 kHz |
| Max SPL @ 1m: |
107 dB |
|
| Power Handling: |
60 Watt RMS |
|
| Peak Power Handling: |
120 Watt PEAK |
|
| System Sensitivity: |
89 dB |
|
| Impedance: |
16 Ω |
|
| Crossover frequencies: |
200 Hz |
|
| INPUT SECTION |
| Input connector: |
Removable 4 pole Euroblock |
|
| Constant voltage: |
100 V, 70 V V |
|
| Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
| CABINET |
| Hardware: |
Material PVC |
|
| Colour: |
White / Black |
|
| PHYSICAL SPECIFICATIONS |
| Height: |
300 / 11.81 |
|
| Width: |
203 / 7.99 |
|
| Depth: |
400 / 15.74 |
|
| Net Weight: |
8.06 / 17.76 |
|
| SHIPPING INFORMATION |
| Package height: |
370 / 14.56 |
|
| Package width: |
265 / 10.43 |
|
| Package depth: |
470 / 18.50 |
|
| Shipping Weight: |
9.24 / 20.59 |
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01“)
| Features
- Compact subwoofer system for installations
– 12″ double coil loudspeaker
– Right/Left inputs
– Filtered right/left outputs
– Wall mount accessory
The Arco 12 Sub incorporates the new 122S dual coil 12” loudspeaker for bass reproduction which provides low frequency output to 30 Hz. The dual voice coil configuration of the loudspeaker allows the cabinet to reproduce both the left and right channel subwoofer frequencies.
The Arco 12 Sub cabinet uses a band-pass configuration. The enclosure is manufactured in MDF and is available in a black paint finish. An optional mounting accessory permits wall mounting. The connector panel provides stereo inputs and high-pass filtered satellite outputs for either Arco 4 or Arco 24 systems.
The Arco 12 Sub is ideal for foreground music and music/paging systems requiring bass reinforcement. Possible applications include restaurants, retail outlets, bars, music cafes, fitness centers, or any other indoor application.
Technical Data
| Power Handling |
170 W Cont. Program/Coil |
| Frequency Range (-10 dB) |
30 Hz-180 Hz |
| Nominal Impedance |
8 + 8 ohms |
| Sensitivity 1 W/1 m |
106 dB SPL |
| Rated Peak SPL at 1 m |
134 dB |
| Internal Crossover |
In: 12dB/oct low pass 180 Hz
Out: 6 dB/oct high-pass |
| Connectors |
Sping-Loaded Terminals |
| Enclosure Material |
MDF |
| Color/Finish |
Black Paint |
| Dimensions (H x W x D) |
36 x 59.2 x 28.5 cm
14.2 x 23.3 x 11.2 in |
| Weight |
14 kg (30.8 lb) |
|
Reviews
There are no reviews yet.