| Content |
MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors.
\"Fully passive\" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4\" TRS connectors, one with both unbalanced RCA and unbalanced 1/8\" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4\" TRS plus unbalanced 1/8\" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out!
Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.
Features
- 2x mono balanced 1/4\" TRS input (input A)
- 2x mono unbalanced RCA input (input B)
- 1x stereo unbalanced 1/8\" mini jack input (input B)
- 2x mono balanced XLR output (output A)
- 2x mono balanced / unbalanced 1/4\" TRS output (output B)
- 1x stereo unbalanced 1/8\" mini jack output (output B)
- selected high quality potentiometer for passive volume control
- A/B input selection switch
- L/R switch to swap left & right audio channels
- independent A and B buttons to enable and disable the outputs
- mono downmix button (mixes left to right channel and right to left channel)
- mute button to mute output signal instantly
|
MC1.1 - Monitor PreAmp Fall in love with your vinyl again! Hot on the heels of the Drawmer MC2.1 well known for its functionality and transparency comes its new sibling the MC1.1 Monitor Preamp, offering the same fantastic sound but with a revised feature set more suitable for a less complex post production booth or home use where multiple speaker setups are not permissible or even required, and with the addition of a new RIAA phono stage the MC1.1 is a great solution for your precious turntable setup. The front panel is dominated by the two large, independent volume controls for the main line outs and the headphone amplifier, both incorporate a paralleled custom quad pot for excellent channel matching and the smoothest possible action. There are also individual switches for each input source and output section making an elegantly simple yet functional user interface. Features: - Ultra low noise and transparent circuit design.
- Linear power supply with low hum toroidal transformer and internal voltage selector switch.
- 3 Input Sources - Balanced XLR, MP3 Player 3.5mm Jack & Switchable Line/Phono (RIAA MM) RCA.
- Two switchable output stages, Balanced XLR and RCA.
- Mono Sub woofer output available simultaneous to balanced outs.
- Parallelled custom quad pots on main and headphone level controls for excellent channel matching and smooth feel.
- Independent volume controls for the main outputs and headphone section.
- Rugged steel chasis and stylish brushed aluminium cover.
- Can be stacked and is rack mountable (with the MCB 2U mounting kit).
- Dimensions: L 272mm x W 215mm x H 81mm. Weight: 2.5kg.
- Designed and manufactured by Drawmer in the UK.
|
- All-passive volume control circuit
- Stereo and AUX inputs
- Dual outputs
- Additional mono output
- Balanced and unbalanced connection
- Integrated high quality headphone amplifier
- Mono, mute and PFL switches
- Stereo volume, AUX and headphone level controls
- Elegant design with solid wood side panels
- Built to last
The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply.
Symmetric combo sockets serve as stereo input. The Monicon® L’s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation.
Product type
Other Studio and Recording Equipment
Channels
2
Inputs
2
Input connectors
3.5 mm TRS , RCA , XLR
Input type
balanced/unbalanced (depending on TS/TRS connection)
Max. input level
20 dBu
Input impedance
(balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)
Outputs
3
Output connectors
XLR
Output type
balanced/unbalanced (depending on TS/TRS connection)
Max. output level
20 dBu
Output impedance
600 Ohm(s)
Frequency response
10 - 40000 Hz
THD
0.001 %
Max. attenuation
(Attenuator + Mute) 112 dB , (Attenuator) 85 dB
Controls
attenuation , input selector , mono , mute , output selector , PFL source
Cabinet material
sheet steel , wood
Cabinet surface
Powder coated
Width
218 mm
Height
77 mm
Depth
100 mm
Weight
1,14 kg | Manage multiple audio sources and sets of monitor speakers, track using illegally loud headphone amplifiers, and talk back to your drummer—all from your desktop. Switch quickly and easily between up to four audio sources with a selection of input types. Audition your music with your choice of three stereo pairs of speaker outputs, each with separate level control—and four screaming-loud headphone outs. With Monitor Station V2, you can evict the drummer from the main room, banish the guitarist to the bathroom, shove the singer into a closet, and make them like it. | Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: M
- Dimensions: 250 x 320 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
| Mackie Big Knob Studio Monitor Controller and Interface
- Three Sources and Two Monitor Pairs
- Classic Big Knob Volume Control
- Independent Trim on All Sources
- Mono, Mute, and Dim Functions
The Mackie Big Knob Studio is a monitor controller and interface that allows you to choose between three audio input sources and two monitor pairs. It can be used for project and professional studios and is designed to increase your workflow for recording and mixing applications.
It features a built-in 2x2 USB recording interface with two Onyx mic preamps and phantom power for condenser microphones. Recording and playback is at 24-bit/192 kHz resolution and the cue mix allows for controlled blending of direct inputs with other signals for zero-latency recording. Choice of recording paths provide flexibility for applications like podcasting and more.
Additionally, other features include flexible source connections, a convenient 1/8" input for your smartphone, dual headphone outs with independent level control, a built-in talkback mic, and 16-segment high-resolution input source metering.
Finally, with its sturdy and built-like-a-tank design, the interface is compatible with all major DAWs on both Mac and Windows platforms. The Big Knob Studio features a download for ProTools | First and Waveform software and The Musician's Collection plug-in package including 23 high-quality plugins with BBD Delay, Level Lite, 304E EQ, and 304C Compressor. To authorize the software, simply input the mixer's serial number on the website.
Professional Source and Monitor Selection
- Choose between 3 sources and 2 monitor pairs
- Classic Big Knob volume control
- Independent trim on all sources and monitor outs
- Mono, mute and dim functions
Flexible 2x2 USB Recording Interface
- Two boutique-quality Onyx mic preamps including phantom power for condenser microphones
- High-resolution 192kHz / 24-bit recording and playback
- Cue mix allows controlled blending of direct inputs with other signals for zero-latency recording
Comprehensive Feature Set for Professional Studios
- Flexible source connections including convenient 1/8” input for your smartphone
- Dual headphone outs with independent level control
- Built-in talkback mic for easy communication with artists
- 16-segment high-resolution input source metering
Professional Production Content
- Content
- Pro Tools | First and Waveform OEM professional software and plugin packages included
- The DAW Essentials Bundle for Waveform OEM includes 16 powerful plugins like Equalizer, Compressor, Reverber8, and Limiter
- Included Software from Avid, including Pro Tools | First
- An industry standard for decades, Pro Tools | First is easy enough for beginners yet sophisticated enough for experienced musicians. Get many of the same tools used by your favorite artists and recording studios. And now you can collaborate online with anyone, anywhere, and create at the speed of your imagination. Available for macOS and Windows operating systems.
- In addition to the powerful plug-ins within Pro Tools | First, this mixer comes with the exclusive Mackie Musician Collection featuring 23 fantastic plug-ins, including:
- Avid 304E EQ: Add musical warmth with a treble and bass equalizer with sweepable mid control
- Avid 304C Compressor: Tweak the clarity, balance, and rhythmic feel of music with this optical-modeled compressor
- BBD Delay: Create delay, chorus, and vibrato effects based on a classic guitar pedal
- Black Op Distortion: Add rich distortion based on a classic distortion pedal
- Black Shiny Wah: Achieve the famous classic tones of a respected wah wah pedal
- Black Spring Reverb: Get the twang and space of a vintage amplifier
- C1 Chorus: Emulates a classic chorus pedal
- DC Distortion: Dial up a range of overdriven tones with this Avid custom distortion effect
- Eleven Lite: Get the sound of popular guitar amps and speaker cabinets
- Flanger: Create esoteric sounds with this homage to vintage and modern flangers
- Graphic EQ: Sculpt frequencies with ease
- Gray Compressor: Add warmth to tracks based on a vintage Ross compressor
- Green JRC Overdrive: Get the coveted sounds of a classic IC overdrive pedal
- In-Tune: Keep your instruments in tune with this digital tuner
- Orange Phaser: Create interesting effects with this phase shifter based on a classic design
- Roto Speaker: Recreate the sounds of a Leslie rotary speaker cabinet
- Sci-Fi: Add analog synth-type ring and frequency modulation
- Studio Reverb: Create natural-sounding reverb and ambient effects
- Tape Echo: Add vintage analog delay and chorus effects
- Tri Knob Fuzz: Get the Hendrix tone with this fuzz box based on one of the first fuzz pedals
- Vari-Fi: Create the effect of audio changing tape speed
- Vibe Phaser: Add phase-shift and rotary speaker effects
- White Boost: Boost gain without coloring tone
| Inputs |
2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Inputs
2 x 1/4" TRS Balanced/Unbalanced Line Inputs
1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Input |
| Outputs |
2 x 1/4" TRS Balanced/Unbalanced 2-Track Line Outputs
4 x 1/4" TRS Balanced/Unbalanced Monitor Outputs
2 x 1/4" TRS Unbalanced Headphone Outputs |
| USB I/O |
1 x USB 2.0 Type-B |
| Resolution |
24-Bit / 192 kHz |
| Frequency Response |
20 Hz to 20 kHz (±0.5 dB, Unity Gain, +4 dBu Input) |
| Noise |
Mic Inputs to Outputs: < -125 dBu RMS, A-Weighted (150 ohms Terminated, 22 kHz Bandwidth)
Line Inputs to Outputs: < -90 dBu RMS, Unweighted (150 ohms Terminated, 22 kHz Bandwidth) |
| THD + N |
<0.01% Unweighted (Unity Gain, 1 kHz at +4 dBu Input, 80 kHz Bandwidth) |
| Crosstalk |
< -60 dB at 1 kHz (Unity Gain, -1 dBFS Input) |
| Attenuation |
Muted: -60 dB
Dim: -20 dB |
| Maximum Input Level |
+22 dBu |
| Maximum Output Level |
+22 dBu |
| Power Requirements |
100 to 240 VAC, 50/60 Hz, 0.75 A via Universal Power Supply |
| Dimensions (W x D x H) |
6.4 x 9.9 x 3.2" / 16.3 x 25.1 x 8.1 cm |
| Weight |
3.5 lb / 1.6 kg |
|
Reviews
There are no reviews yet.