| Content |
| 1200 W continuous program power capacity |
|
| 76 mm (3 in) copper voice coil |
|
| 40 – 2000 Hz response |
|
| 100.5 dB sensitivity |
|
| Aluminium demodulating ring allows a very low distortion figure |
|
| Neodymium ring magnet allows a very high force factor and linear excursion |
|
| Double silicone spider with optimized compliance |
|
| Ventilated voice coil gap for reduced power compression |
| Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
2.5 "
Voice Coil
63.5 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
160 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
500 W
maximum rated load
1000 W
Sensitivity (1 W / 1 m)
96 dB
Frequency response
42 - 3200 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
39 Hz
Re (DC resistance)
6.11 Ohm(s)
Qms (mechanical quality)
6.3
Le (inductance of the voice coil)
1.37 mH
Qes (electrical quality)
0.52
Qts (overall quality)
0.48
Vas (equivalent volume)
241
Mms (moving mass)
75 g
BL (power factor)
14.6 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.23 mm/N
Sd (membrane area)
873 cm²
Weight
6,449 kg |
| 1400 W continuous program power capacity |
| | 100 mm (4 in) copper voice coil |
| | 40 – 2000 Hz response |
| | 97 dB sensitivity |
| | Double silicone spider with optimized compliance |
|
| 1000 W continuous program power capacity |
|
| 76 mm (3 in) copper voice coil |
|
| 40 – 2000 Hz response |
|
| 99.5 dB sensitivity |
|
| Neodymium magnet allows a very light yet powerful motor assembly |
|
| Ventilated voice coil gap for reduced power compression |
|
Neodymium coaxial speaker with 15" woofer, 8Ω,
400W Nominal, 800W continuous, 99dB
(1W/1m) and horn 80W Nominal, 160W
continuous, 105dB (1W/1m), response
frequency 40-18000Hz, dispersion 80 degrees,
5,6Kg.
| 800 W continuous program power capacity |
|
| 80° nominal coverage |
|
| 40 – 18000 Hz response |
|
| 99 dB sensitivity |
|
|
Single Neodymium magnet assembly
| Nominal Diameter |
380 mm (15 in) |
| Nominal Impedance |
8 ohm |
| Minimum Impedance |
6.0 ohm (LF)
8.0 ohm (HF) |
| Frequency Range |
40 - 18000 Hz |
| Dispersion Angle |
80° |
| LF Unit |
|
| Sensitivity (1W/1m) |
99 dB |
| Nominal Power Handling |
400 W |
| Continuous Power Handling |
800 W |
| Voice Coil Diameter |
76 mm (3 in) |
| Winding Material |
Copper |
| HF Unit |
|
| Sensitivity (1W/1m) |
105 dB |
| Nominal Power Handling |
80 W |
| Continuous Power Handling |
160 W |
| Voice Coil Diameter |
75 mm (3 in) |
| Winding Material |
Aluminium |
| Diaphragm Material |
Polyester/Titanium |
| Recom. Crossover |
1.2 kHz |
| Overall Diameter |
393 mm (15.5 in) |
| Bolt Circle Diameter |
374 mm (14.7 in) |
| Baffle Cutout Diameter |
353 mm (13.9 in) |
| Depth |
198 mm (7.8 in) |
| Flange and Gasket Thickness |
16 mm (5/8 in) |
| Net Weight |
5.6 kg (12.3 lb) |
| Shipping Weight |
7.0 kg (15.4 lb) |
| Shipping Box |
450x450x290 mm
(17.7x17.7x11.4 in) |
|
|
- 98 dB sensitivity 1 W / 1 m
- 400 W + 60 W Power handling
- 3" Copper Sandwich Voice Coil
- Single Point Source providing coherent Wave Front
- Optimal for compact 2-way Systems
|
Reviews
There are no reviews yet.