LD SYSTEMS VA4 Dual Line Array System 4”

LD Systems VA4 Line Array Speaker
The LD Systems VA4 is a lightweight, ultra compact 2 x 4" line array speaker cabinet for configurations with an 80Hz – 19kHz frequency response. The dual 4" woofers with high efficiency neodymium magnets and Kevlar cones have a power handling capacity of 200W continuous and 400W peak. Coupled to a 1" waveguide, the neodymium high frequency compression driver features a 1.35" voice coil, protection circuit and a 75W continuous/150W peak rating. Individual element dispersion is 120° x 10° over a wide frequency range.

The VA4 cabinet is made from 12mm birch ply painted in hard-wearing, water-resistant Dura-Coat LX. It is equipped with Neutrik NL-4 connectors, rigging hardware and easy angle adjustment from 0° to 7.5° in three 2.5° steps. The VA4 is designed both for flying and ground stack applications.

For low frequency extension the dual 12" Bandpass subwoofer V212B and the V215B 2x15” Bass reflex subwoofer perfectly complement the VA4. Ease GLL-files and controller setups for the LD Systems DPA260 are available online for optimum array configuration and easy startup.

Download the Ease Focus Files for LD-VA4.

Model Name: VA-4
Type: Dual Two Way Line Array Speaker
Woofer: 2 × 4" Neodymium Kevlar
Horn: 1" Wave Guide
Compression Driver: 1" Neodymium with 1,35" voice coil
Dispersion: 120° x 10°
LF Power Capacity (Cont./Peak): 200 W / 400 W
HF Power Capacity (Cont./Peak): 75 W / 150 W
Frequency Range: 80 Hz - 19.000 Hz
SPL 1 W / 1 m: 90 dB
Max. SPL (Peak): 119 dB
Impedance (LF / HF): 16 Ohms
Connectors (In / Out): 2 x Neutrik NL-4
Protection: Tweeter Protection
Cabinet Material: 15 mm Birch Plywood
Cabinet Surface: Dura-Coat LX Textured Finish
Dimensions (W x H x D): 480 × 139 × 261 mm
Available Accessory: LDVA-4BF (Bumper Frame) LDVA-4FC (Flight Case) LDVA-4MK (Mounting Kit for Stacking)

The SR-C8S is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.

The VT4880A Dual 18" Ultra Long Excursion Subwoofer Line Array Element is designed to deliver high fidelity sound reinforcement of sub-low frequencies for a wide variety of live music and A/V support applications. Typical uses include concert audio and multi-media presentations where extended low-frequency performance is desired.

The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types.

TOA HX-5 Array system

Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B 
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1

The SR-S4L is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.