Content |
Length No
Accessories Remote Control, Digital Drive Plus Accessory Kit, Video Cable
Amplifier 3000 watts Dynamic, 1250 watts RMS Power
Auto On/Off Yes
Cabinet Design Sealed servo enclosure
Dimensions: (H/W/D) 22.7" x20.7" 25.6" (58cm x 53cm x 65cm)
HiPass Crossover 80 or 100 Hz at 6 dB/octave
LoPass Crossover 40 Hz to 199 Hz (variable in 1 Hz increments) selectable slope Default: 80 Hz @ 24 dB/Octave
Phase Control 0, 180 Degrees
Removable Grille Yes
Shipping Weight 140 lbs. (64 kg)
Size No
Voice Coil Six-layer, 75mm
Warranty (N. Am.) Two years (electronics & drivers - parts & labor)
|
Outer Flange Dimensions | (Metric) :15-1/2” W x 21” H | 39.4 x 53.3 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 19-7/8” H | 36.5 x.50.5 cm
Depth from Flange | Metric :3-13/16” | 9.7 cm
Driver Complement :One 10" Long-Excursion Woofer coupled to one 10" infrasonic Radiator
Frequency Response :16 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :30 lbs | 13.6 kg
|
Dimensions | Metric :12” W x 17-7/8” D x 14-7/16” H | 30.5 x 45.4 x 36.7 cm
Driver Complement :One high-definition 10" woofer pressure coupled to one 10" low bass radiator.
Frequency Response :18Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :One to a carton
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Description Active balanced-drive closed-box subwoofer system
Drive units 2x Ø300mm (12 in) Rohacell® cone long-throw
Frequency range -6dB at 15Hz and 250Hz
Frequency response ±3dB 17Hz - 145Hz
Power output: 1000W
Rated power consumption: 135W
Standby power Consumption: 100dB
Functions: 5 Presets
Input sensitivity
Gain
Low-pass filter
Graphic equalisation
Room compensation
Auto on/standby
Trigger on/standby
Trigger preset switching
RS-232 automation control
Inputs: Stereo Line In (2x RCA Phono)
Mono (LFE) Line In (RCA Phono)
Mono (LFE) Line In (XLR balanced)
Dimensions Height:490mm (19.3 in) not including feet
Width: 460mm (18.1 in) including grilles
Depth: 410mm (16.2 in) including controls
Net weight 44kg (97 lb)
Cabinet finish Gloss Black
Cherrywood
Rosenut
Grille Black cloth
ALSO AVAILABLE IN Cherrywood, rosenut
|
Dimensions | Metric :12” W x 12” D x 12-1/2” H | 30.5 x 30.5 x 31.8 cm
Driver Complement :One high-definition 8" long throw woofer, pressure coupled to two 8” low bass radiators
Frequency Response :14 Hz – 200 Hz
Internal Amplifier Power :1250 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :42 lbs | 19.0 kg
Warranty :5 Years; 3 Years for Amplifiers |
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby
Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
|
Reviews
There are no reviews yet.