Content |
30 MHz selection bandwidth (depending on local frequency plans)
- 8 hours of operation with a single AA size battery
- Compatible with all AKG MicroMics
- Low battery indicator
- Smallest and lightest bodypack transmitter in its class
- Complete with MKG L cable for direct connection to electric guitar or bass
The Perception wireless system comes complete with bandwidths up to 30 MHz and excessively low-current transmitters, which are unique in its class, cementing Perception Wireless as one of the most comprehensive systems in its price range.
The Perception Wireless is designed to accommodate musicians and entry-level audio technicians, although it has the capabilities to handle even the most difficult audio setups with up to 8 channels per band.
The pocket transmitter PT45 - which is the smallest in its class - runs on a single AA battery, and is compatible with all AKG MicroMics. The SR45 Stationary Receiver delivers a diversity system, professional XLR and 1/4 inch jack outputs and the SMPS solution. |
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Metal 1U Rack System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 120 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1
RF2 | Compatible Channels | 14 | Transmission Range | 300 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required | Transmitter Specs | | TBP12 Transmitter | A/D Conversion | 24-bit Delta Sigma, 128 times oversampling | Input Impedance | 1.3 M-Ohm | Connectors | TA4f | Controls | Power On/Off, Channel Select | LEDs Display | Power, Audio Status | LCD Display | Channel Number, Battery Life | Battery Life | Approx. 8 hours (2x AA alkaline batteries) | Receiver Specs | | RXR12 Receiver | D/A Conversion | 24-bit Delta Sigma, 128 times oversampling | Connections | 1/4-inch output, XLR output; Tuner pass-thru | LEDs Display | Audio Status, Transmitter Battery Life, Mute, RF | LCD Displays | Channel Number, Transmitter Battery Life | Controls | Channel select, Cable Tone Simulator, Setup | Power Requirements | IEC connector for internal switching power supply that works worldwide |
|
- Ultra-compact, lightweight and rugged magnesium housing.
- 64 MHz wide bandwidth.
- Dual-antenna diversity design eliminates signal dropouts and enhances RF stability.
- lightweight, exceptionally durable magnesium alloy bodypack case.
- LCD screen displays audio & RF metering, battery status bar, group & channel, R/L balance.
- Selectable stereo, mono or mixed output mode.
- PLL-synthesized technology enables large compatible channels operation.
- ACT syncs the transmitter & receiver frequency automatically.
- Menu controls and indicators accessed by three buttons.
- S/N ratio > 95dBA (stereo receiving).
- 95dB stereo separation.
- 20 Hz ~ 15 kHz Frequency Response.
- 0.1% @ 1kHz distortion.
- Earphone output power 120mW @ 16Ω.
- Extended operating hours with 2 AA alkaline batteries.
- Dual unbreakable soft antennas.
Frequency Range
|
480~824 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Compatible Channels & Preset Channels
|
12 compatible channels in group 1-10
16 compatible channels in group 11-16
Testing channels in group 17
16 user-defined channels in group 18
216 preset channels
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
± 0.005% (-10 ~ +60℃)
|
Sensitivity
|
10μV input level, S/N > 90dB (Stereo)
|
Modulation Mode
|
Digital Modulation
|
Receiving Mode
|
Diversity Receiving
|
Channel Set-Up
|
ACT Sync
|
Spurious
|
|
T.H.D
|
0.1%@1 kHz
|
Max. S/N ratio
|
95 dBA (Stereo)
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
Stereo Separation
|
> 95 dB
|
Volume Control
|
126 dB (1dB step)
|
LCD Display
|
audio & RF metering, battery status bar, group & channel, R/L balance
|
Output Jack
|
3.5 mm Ø stereo earphone jack
|
Output Power
|
2 × 120 mW @ (16Ω)
|
Earphone Impedance
|
≧ 16 Ω
|
Power
|
2 "AA” Alkaline batteries
|
Current Consumption
|
Approx. 170 mA
|
Operating Time
|
Approx. 8 hours with 2 AA alkaline (stand-by)
|
Dimensions (W × H × D)
|
63 × 82 × 23 mm (2.6 × 3.2 × 0.9 ")
|
Net Weight
|
Approx. 98 g (3.5 oz) excluding batteries
|
Transmitter
|
MI-909T
|
Operating Temperature
|
-10 ~ +60℃
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
WMS470 is a professional multichannel wireless microphone system with pilot tone transmission to prevent unwanted noise. The Sport Set includes a PT470 body-pack transmitter in a compact and rugged housing. The package also enclose a C544 L condenser head-worn microphone featuring a cardioid polar pattern and an external shock mount for high mechanical-noise rejection. Its moisture shield ensures a high degree of humidity protection for the microphone.
The WMS470 Sports Set package includes:
1 x SR470 Receiver
1 x PT470 Body-pack transmitter
1 x C544 L Head-worn microphone
1 x Rack mount kit, 1 x Universal power supply with US/UK/EU adapter, 1 x AA size battery, 2 x Antennas, 1 x Belt clip
|
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
±0.005% (-10~+60℃)
|
Modulation Mode
|
Digital Modulation
|
Output Power
|
10 ~ 100 mW (country dependent)
|
Spurious Rejection
|
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
T.H.D.
|
|
ADC Dynamic Range
|
112 dBA
|
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
|
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
|
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
|
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
|
Impedance
|
≧ 16 Ω
|
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
|
Antenna Connector
|
TNC (50 Ω impedance)
|
Power Supply
|
DC 12~15V
|
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
|
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
| Shure QLXD14 Wireless System, 470-534MHz, Includes QLXD1 Bodypack Transmitter, QLXD4 Receiver
The QLXD14 Bodypack Wireless System is part of the QLX-D wireless systems family.
The QLXD14 wireless system includes a QLXD4 receiver, QLXD1 transmitter, a WA305 instrument cable, PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, a zipper bag, two AA Alkaline batteries, and rackmount hardware. The QLXD14 system offers good wireless functionality for demanding live sound events and installations.
300 feet (100 meter) line-of-sight operating range 120 dB dynamic range Digital predictive switching diversity receiver to capture the clearest sound 64 MHz tuning bandwidth Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Selectable display mode showing group/channel, frequency, or battery runtime Rugged metal construction |
Reviews
There are no reviews yet.