| Content | ARTLIGHT STERPACK15 STERILIZATION PACKAGE INCLUDING PHILIPS 72617940 TUV 15W LAMP AND SINGLE TUBE MOUNT HOLDER BASE 45CM 1X15W
PHILIPS 72617940 TUV 15W SLV/25 UV-C Lamp G13 54V ΛΑΜΠΑ ΑΠΟΣΤΕΙΡΩΣΗΣ, MEDICAL Germicidal for universities, hospitals, jails and laboratories
TUV T8 lamps are double-ended UVC (germicidal) lamps used in professional water and air disinfection units. TUV T8 lamps offer almost constant UV output over their complete lifetime, for maximum security of disinfection and high system efficacy.
T8 G13 UV-C sterilization lamps TUV 15W G13 Philips 928039004005 8711500726179
Cap-Base G13
Bulb T26
Main Application Disinfection
Useful Life 9000 hr
Lamp Wattage 15W
Lamp Wattage Technical 15.9W
Lamp Voltage 54V
Lamp Current 0.34 A
Mercury (Hg) Content 2.0 mg
UV-C Radiation 4.9W
Base Face to Base Face A 437.4 (max) mm
Insertion Length B 442.1 (min), 444.5 (max) mm
Overall Length C 451.6 (max) mm
Diameter D 28 (max) mm
TUV T8 - Guaranteed lifetime simplifying planned maintenance in professional applications
-Security of effective disinfection over the useful lifetime of the lamp
-Maintenance can be planned in advance, virtually eliminating the need for expensive spot replacement of prematurely failed lamps
-High system efficacy because it is not required to over-design the purification system to maintain effectiveness of disinfection
-Good environmental choice because of lowest amount of mercury
Features
-Short-wave UV radiation with a peak at 253.7 nm (UVC) for disinfection purposes
-Protective inside coating ensures constant UV output over the complete lifetime of the lamp
-Long lifetime of 18.000 hours (based on operation on a Philips electronic driver)
-High reliability with the lowest percentage of lamps that fail prematurely in the market (90% of all lamps still operate on full output and quality after 15,000 hrs if operated on a Philips electronic driver)
-Special lamp glass filters out the 185 nm ozone-forming radiation
-High Output versions available for optimum UVC output per lamp length, allowing for reduction of system size
-Warning sign on lamp indicates that the lamp radiates UVC
Applications
-Air disinfection systems in professional applications such as universities, hospitals, jails and laboratories
-Upper air and whole room disinfection equipment in hospitals, intensive care units and surgery rooms
-Areas with low maintenance and/or disruptive costs
-Fish ponds and process water units
ARTLIGHT 01115 ΣΚΑΦΑΚΙ / ΒΑΣΗ ΓΙΑ ΛΑΜΠΑ ΦΘΟΡΙΟΥ - LED ΜΟΝΗ 45CM 1X15W
- IDEAL FOR FLUORESCENT LAMPS AND LED
- SINGLE LAMP
- LAMP LENGTH 45CM
- 1Χ15W
- STARTER IS NOT INCLUDED
| The all-digital fingertip pulse oximeter, based on all digital technology, is intended for the easy, fast and noninvasive spot-check measurement of functional oxygen saturation of arterial hemoglobin (SpO2) and heart rate.
Ability to operate for 30 hours continuously.
This option is especially useful in case our health is not at a very good level and we want constant monitoring.
The product is suitable for use in family, hospital, oxygen bar, social medical organization, physical care in sports and etc.
Suitable for:
- Patients with respiratory and heart problems, especially COPD, asthma, pneumonia
- Diagnosis of certain sleep disorders, such as apnea
- Pilots, flight attendants and generally people who travel a lot and are on airplanes under pressure over 10,000 feet continuously
- Climbers due to high altitude
- Athletes whose oxygen levels can be reduced with exercise
- Anyone who wants to monitor blood oxygen saturation
Features:
- Display Type: Three Color LED
- Measurement range: SpO2: 0% ~ 100% (Resolution: 1%).
- Accuracy: 70% ~ 100%: 2% 70%, unspecified.
- Pulse rate Measurement range PR: 30bpm ~ 250bpm (Resolution: 1bpm)
- Accuracy: 22bpm ή ± 2% (choose bigger)
- Resistance to ambient light: the difference between the value measured in conditions of artificial light or indoor natural light and that of the dark room is less than ± 1%.
- Power consumption: less than 25 mA
- Voltage: DC 2.6V ~ 3.6V
- Power: Alkaline batteries 1.5V (Size ΑΑΑ) x 2 (Not included)
- Autonomy: 20 hours
- Auto turnoff (Within 8\")
- Weight: 100 gr
- Dimensions: 5,8 x 3 x 3 cm
Package Contents:
1 x Pulse oximeter
1 x Strap
1 x User Manual
|
Infrared thermometer introduction: ①fever reminder, guard your baby\'s health ②Infrared temperature measurement technology Avoid contact with baby skin and spread bacteria ③Large back lit display (multi-parameter display) ④50 groups of memory functions °C/°F switching function / low battery reminder function ⑤2 temperature measurement mode Object temperature, body temperature measurement mode switch, 3-color back light display different temperature display different colors. ⑥Measurement result reminder: At the end of the measurement, the speaker will make a sound, prompting to complete the measurement. ⑦Precision temperature probe German precision probes ensure accurate temperature measurement ⑧Low power consumption, energy saving and envirronmental protection Powerred by 2 AAA batteries, no measurement 30 S automatic shutdown.
Display: LCD Digital
Way of working: Infrared
Alarm function: Three-color alarm
Operating mode: Human body and objects
shape: Handheld Gun shape
Battery voltage: DC 3 V (2 AAA alkaline batteries)
Measuring range: 34.0 ℃ ~ 43.0 ℃
Measurement accuracy: 42.0 ℃: ± 0.3 ℃ 35.0 ° C to 42.0 ° C: ± 0.2 ° C
Measuring distance: 5 ~ 15 cm
Measurement interval: about 6 seconds
Three-color back light Surface temperature mode:
Below 37.5 ℃ is green
37.6 ° C to 38.0 ° C is yellow
38.1 ℃ above is red
Automatic shutdown: ≦ 20 seconds
Storage: -20 ℃ ~ 45 ℃, relative humidity: ≦ 85% | Gravity XDS SET 01
DIY Disinfection Stand Set 01
It is currently very hard to come by stands for disinfectants let alone disinfectant dispersers themselves. To protect our guests and employees we at Adam Hall tested alternatives early March and built 8 prototypes which have been in continous use since then.
We would like to share this solution with you as it can be a great help for many at the moment.
This set combines the: GMS23, GMS2WP, GMAMH01, GMADRINKL and 8705BLK. The components can be assembled quickly and are perfect for mobile use. It is possible to attach an additional weight plate (GMS2WP) to the bottom of the stand. This is especially important if you are using a mechanical dispenser instead of an electronic one. For any dispensers with a diamiter of up to 90mm.
Disclaimer
Please note that this is most probably not a medically certified use. Although we can not identify any disadvantages or risks - please note that we can not take any responsibilities, should issues arise.
Product type
Stands and Tripods
Type
Other Stands and Tripods
GMAMH01 - Gravity MA MH 01 Holder for Microphone Stands
Product type
Microphone Accessories
Suitable for tube diameter
up to 30 mm
8705BLK - Adam Hall Hardware 8705 BLK Dish black unpunched
Product type
Recessed Castor Dishes
Dish surface
Powder coated
Mounting hole diameter
5 mm
GMADRINKL - Gravity MA DRINK L Large Drink Holder for Microphone Stands
Product type
Stands and Tripod Accessories
Suitable for tube diameter
up to 35 mm
Interchangeable rings
1 x 15 mm
Black ring pack included
Yes
GMS23 - Gravity MS 23 Microphone Stand with Round Base
Tubing surface
Powder coated
Interchangeable rings
1 x 20 mm
GMS2WP - Gravity MS 2 WP Weight Plate for Round Base Microphone Stands
| Gravity MS 23 DIS 01 W
Height-adjustable disinfectant stand with universal holder White
- Universal disinfectant stand & holder with clamp (perfect for 500ml pump bottles)
- Height adjustable up to max. 160cm
- Sturdy, durable design and exceptionally stable base
- Practical mounting slots on the back for direct wall fixing and attachment of anti-theft ropes or similar.
- Maximum hygiene through easy cleaning of the removable drip tray
- Lower mounting on microphone stand via 5/8" thread including reduction adapter to 3/8“
- Dimensions bottle holder: inside width 100 mm, inside depth flexibly adjustable from 62- 96 mm
- Holder compatible with SCP710 Super Clamp for fixing to trusses; scaffolding and railings
The Gravity MS 23 DIS 01 W is a stable, height-adjustable disinfectant stand consisting of the MS 23 microphone stand with round base and the MA DIS 01 universal disinfectant holder. It's a premium quality stand with thick walled tubing, black powder coated finish and 160 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces. For smooth, durable height adjustment, the MS 23’s handle is made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. Perfect for mobile use in entrance and waiting areas. Maximum hygiene for rooms with high visitor frequency such as shops, practices, gastronomy, hotels, schools, event halls, commercial and business premises. So you can simply store your e.g. Sterillium 500 ml neatly and always ready to hand. An additional set of black coding rings is included with the MS 23; more ring packs are available in a wide array of colours for instant personalization.
Product type
Stands and Tripods
Type
Other Stands and Tripods
Color
White
Weight
4,8 kg
GMADIS01W - Gravity MA DIS 01 W Universal Disinfectant Holder White
Product type
Stands and Tripod Accessories
Type
Disinfection tray
Weight
0,6 kg
Material
Steel
Color
White
Width
105 mm
Height
145 mm
Depth
195 mm
Inside width
100 mm
Inside depth min.
62 mm
Inside depth max.
96 mm
Interchangeable rings
2 x 20 mm
GMS23W - Gravity MS 23 W Microphone Stand with Round Base, White
Type
Microphone Stands
Tubing material
Steel
Weight
4,2 kg
Tubing colour
White
Tubing surface
Powder-coated
Min. height
1000 mm
Max. height
1600 mm
Transport length
1000 mm
Height adjustment
Yes
Base type
Round base
Base material
Cast iron
Base diameter
270 mm
Base weight
3.6 kg
Black ring pack included
Yes
Interchangeable rings
1 x 20 mm |
ARTLIGHT 01130 FLUORESCENT SINGLE TUBE MOUNT HOLDER BASE LED 90CM 1X30W
- IDEAL FOR FLUORESCENT LAMPS AND LED
- SINGLE LAMP
- LAMP LENGTH 90CM
- 1Χ30W
|
Reviews
There are no reviews yet.