| Content |
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
| Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
| Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
| Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
| Durability |
500 times |
Center Pin |
zinc alloy |
| Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
| Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
| Storage |
-30°C to +70°C |
Material |
ABS Zinc |
| Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
| DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
| Withstand Voltage |
1500V rms |
|
|
| Outer Contact: |
≤ 1 ohm |
|
|
|
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: n/a
? Shell Color: Nickel | Βύσμα σασσί D-shape για CAT6A, shielded, IDC termination, nickel housing.
D-shape CAT6A panel connector, shielded, IDC termination, nickel housing
Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.
Features & Benefits
- Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
- PoE++ compliant according to 802.3bt Type4
- Rugged latch lock system million fold proven
- Intermateable with the existing etherCON CAT5 range
- Shielded system - high noise immunity and EMI protection
Technical Information
| Product |
|
| Title |
NE8FDX-Y6 |
| Gender |
female |
| Electrical |
|
| Dielectric strength |
1 kVdc |
| Insulation resistance |
> 0.5 GΩ |
| Rated current per contact |
1.5 A |
| Transmission performance |
CAT6A, acc. TIA/EIA rating
CAT6A, acc. IEC/ISO/EN rating |
| Power over Ethernet |
PoE++ acc. IEEE 802.3bt |
| Mechanical |
|
| Lifetime |
> 1000 mating cycles |
| Wiresize |
|
| Wiresize |
solid: AWG 26/1 - AWG 22/1
stranded: AWG 26/7 - AWG 22/7 |
| Locking device |
Latch lock |
| Mounting direction |
Front mounting |
| Insulation diameter |
0.85 - 1.6 mm |
| Material |
|
| Contact plating |
Au |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell plating |
Nickel |
| Environmental |
|
| Flammability |
UL 94 V-0 |
| Temperature range |
-40 °C to + 70 °C |
|
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Black |
Neutrik E8 MC-B-1
Cable Connector Carrier black water-protected IP54
The connector carrier consists of a black chrome shell, fixing disk, chuck, brush, and boot. The boot (identical with the XLR X series) is suitable for cable diameters of 3.5 - 8 mm. For bulk cable. RJ45 plug not included.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, lockable solution.The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
Gender
male
Temperature range
-30 to 80 °C
Cable diameter
max. 8 mm
Housing
die-cast zinc
Weight
0,03 kg
| Neutrik introduces BNC 75W cable connectors in push-pull and rear-twist versions.
Featuring a true 75W design that meets the stringent requirements of HDTV/DVD,
these connectors sustain consistent impedance at high frequencies up to 3 GHz,
are easy to handle in high density applications such as video patchbays and switchers,
show excellent return loss and VSWR, consist of machined parts that are precisely
made to our high standards and offer a center pin assembly with a snug fit to provide
tactile indication when the contact is snapped into position.
Push-Pull BNC Cable Connector
* Unique push-pull locking system is ideal for ultra high-density applications, patching, etc.
* Assembly is fast and easy a requires only a standard center contact crimp (.063“/1.60 mm)
after cable prep
* Use of a standard crimp size eliminates the need for different crimp dies and facilitates
field repair
* Innovative screw lock cable retention with the jacket providing superior pull strength
* Standard color is black, optional colored boots available
* For use with cable types: Belden 1694A, Commscope 5765, ELF Inc. Cable, Eupen 705
CRT 5V-HS, Gepco VSD2001, Nokia/Draka 1.0/4.8 AF, Suhner S05133-07, Suhner S05163-02 |
Reviews
There are no reviews yet.