| Content |
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
| Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
| Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
| Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
| Durability |
500 times |
Center Pin |
zinc alloy |
| Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
| Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
| Storage |
-30°C to +70°C |
Material |
ABS Zinc |
| Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
| DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
| Withstand Voltage |
1500V rms |
|
|
| Outer Contact: |
≤ 1 ohm |
|
|
| Βύσμα σασσί D-shape για CAT6A, shielded, IDC termination, nickel housing.
D-shape CAT6A panel connector, shielded, IDC termination, nickel housing
Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.
Features & Benefits
- Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
- PoE++ compliant according to 802.3bt Type4
- Rugged latch lock system million fold proven
- Intermateable with the existing etherCON CAT5 range
- Shielded system - high noise immunity and EMI protection
Technical Information
| Product |
|
| Title |
NE8FDX-Y6 |
| Gender |
female |
| Electrical |
|
| Dielectric strength |
1 kVdc |
| Insulation resistance |
> 0.5 GΩ |
| Rated current per contact |
1.5 A |
| Transmission performance |
CAT6A, acc. TIA/EIA rating
CAT6A, acc. IEC/ISO/EN rating |
| Power over Ethernet |
PoE++ acc. IEEE 802.3bt |
| Mechanical |
|
| Lifetime |
> 1000 mating cycles |
| Wiresize |
|
| Wiresize |
solid: AWG 26/1 - AWG 22/1
stranded: AWG 26/7 - AWG 22/7 |
| Locking device |
Latch lock |
| Mounting direction |
Front mounting |
| Insulation diameter |
0.85 - 1.6 mm |
| Material |
|
| Contact plating |
Au |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell plating |
Nickel |
| Environmental |
|
| Flammability |
UL 94 V-0 |
| Temperature range |
-40 °C to + 70 °C |
|
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Black |
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer
in harsh demanding environments by offering a cable carrier and receptacle
that helps to protect the contacts of the RJ45 connections. Designed to
protect the fragile latch and cover of standard RJ45 connectors from breakage,
you will find uses for this connector system in Ethernet networking of audio,
commercial, entertainment, stage production, DMX lighting, industrial and
outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female
receptacles. The cable end offers a robust diecast shell as a carrier for pre-
assembled RJ45 plugs. Female chassis connectors are based on the current
Neutrik "A" series as well the "D" series of XLR receptacles with secure latching
system - a feature not found on other RJ45 receptacles. Termination is offered
in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products
comply with Category 5 shielded or unshielded and are compatible for use with
10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC 110
terminals, "A" style ? Mfg. #NE8FAV-Y110 | Micro USB Male to HDMI Female MHL HDTV Adapter Cable for Samsung Galaxy S3 i9300 (Black)
Features:
This adapter allows you to connect your mobile with any standard HDMI video cabled so you can share what is on your mobile's screen with other HDMI enabled visual equipment, like a monitor or TV. This is perfect for sharing photos with family or friends or giving a presentation to a client.
3 In 1 Function – Length: 10cm, Micro USB/HDMI/MHL Adapter
Support 1080P Full HD video resolutions
Video Resolution: 480i, 480P, 720i, 720P, 1080i, 1080P (1920×1080/60Hz)
Support 7.1 Surround Channels, 192KHz Audio transmission
Support High-bandwidth Digital Content Protection (HDCP)
Mirror your phone through the Standard HDMI Output on a compatible TV |
BNC Plug 75 Ohm
for 6 mm cable
SpecificationsBNC Plug
Soldering type
Fits 6mm cable
Metal plug
Gold plated contacts
|
Reviews
There are no reviews yet.