Content |
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
Durability |
500 times |
Center Pin |
zinc alloy |
Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
Storage |
-30°C to +70°C |
Material |
ABS Zinc |
Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
Withstand Voltage |
1500V rms |
|
|
Outer Contact: |
≤ 1 ohm |
|
|
|
RJ45 feedthrough receptacle, D-shape metal flange with the latch lock, mounting screws included The etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry. The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market. Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables. - Accommodates NE8MC* or any standard RJ45 plug
- Approved latch lock system
- Mountable from the front or rear of the panel
- Complies with Cat 5e according to TIA / EIA 568B and ISO / IEC 11801 standard
|
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer in harsh demanding environments by offering a cable carrier and receptacle that helps to protect the contacts of the RJ45 connections. Designed to protect the fragile latch and cover of standard RJ45 connectors from breakage, you will find uses for this connector system in Ethernet networking of audio, commercial, entertainment, stage production, DMX lighting, industrial and outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female receptacles. The cable end offers a robust diecast shell as a carrier for pre- assembled RJ45 plugs. Female chassis connectors are based on the current Neutrik "A" series as well the "D" series of XLR receptacles with secure latching system - a feature not found on other RJ45 receptacles. Termination is offered in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products comply with Category 5 shielded or unshielded and are compatible for use with 10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC 110 terminals, "A" style ? Mfg. #NE8FAV-Y110 | Micro USB Male to HDMI Female MHL HDTV Adapter Cable for Samsung Galaxy S3 i9300 (Black)
Features:
This adapter allows you to connect your mobile with any standard HDMI video cabled so you can share what is on your mobile's screen with other HDMI enabled visual equipment, like a monitor or TV. This is perfect for sharing photos with family or friends or giving a presentation to a client.
3 In 1 Function – Length: 10cm, Micro USB/HDMI/MHL Adapter
Support 1080P Full HD video resolutions
Video Resolution: 480i, 480P, 720i, 720P, 1080i, 1080P (1920×1080/60Hz)
Support 7.1 Surround Channels, 192KHz Audio transmission
Support High-bandwidth Digital Content Protection (HDCP)
Mirror your phone through the Standard HDMI Output on a compatible TV | Βύσμα σασσί D-shape για CAT6A, shielded, IDC termination, nickel housing.
D-shape CAT6A panel connector, shielded, IDC termination, nickel housing
Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.
Features & Benefits
- Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
- PoE++ compliant according to 802.3bt Type4
- Rugged latch lock system million fold proven
- Intermateable with the existing etherCON CAT5 range
- Shielded system - high noise immunity and EMI protection
Technical Information
Product |
|
Title |
NE8FDX-Y6 |
Gender |
female |
Electrical |
|
Dielectric strength |
1 kVdc |
Insulation resistance |
> 0.5 GΩ |
Rated current per contact |
1.5 A |
Transmission performance |
CAT6A, acc. TIA/EIA rating
CAT6A, acc. IEC/ISO/EN rating |
Power over Ethernet |
PoE++ acc. IEEE 802.3bt |
Mechanical |
|
Lifetime |
> 1000 mating cycles |
Wiresize |
|
Wiresize |
solid: AWG 26/1 - AWG 22/1
stranded: AWG 26/7 - AWG 22/7 |
Locking device |
Latch lock |
Mounting direction |
Front mounting |
Insulation diameter |
0.85 - 1.6 mm |
Material |
|
Contact plating |
Au |
Shell |
Zinc diecast (ZnAl4Cu1) |
Shell plating |
Nickel |
Environmental |
|
Flammability |
UL 94 V-0 |
Temperature range |
-40 °C to + 70 °C |
|
- For Pre-Assembled RJ45 Plugs
- Lockable Cable Connection Carrier
- Die-Cast Shell with Bushing & Boot
- Up to 0.31" Cable Diameter
- Chuck-Style Strain Relief
- RJ45 Plug Not Included
RJ45 cable connector carrier for pre-assembled RJ45 plugs consists of black chromium shell, bushing and boot. Packed with two cable protection elements for cable diameter up to 8 mm. Cable connector carrier does not include a RJ45 plug.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
Neutrik NE8MX-B Overview
Upgrade the protection of a pre-assembled RJ45 plug with the NE8MX-B etherCON RJ45 Cable Connector Carrier for Pre-Assembled RJ45 Plugs from Neutrik. Boasting a black chromium die-cast shell, bushing, and boot, the NE8MX-B comes with chuck-style strain relief, as well as two cable-protection elements for cable diameters up to 0.31".
Note: The NE8MX-B does not include an RJ45 plug, and it does not intermate with Neutrik NE8FDY-C6 and NE8FDY-C6-B Cat 6 chassis connectors.
Ideal for harsh and demanding environments, the NE8MX-B is designed to protect Ethernet connections in a variety of commercial applications, and it helps to prevent breakage of the fragile components of standard RJ45 connectors. The carrier allows for the assembly of pre-assembled conventional RJ45 cables.
AMP
- 5-554169-3
- 5-554720-3
- 5-554739-3
- 5-558530-2
- 5-558530-3
- 5-569530-3
- 5-569532-2
Black Box
- FM731
- FM730
Bomar
- 300068S
- 300568
DRAHTEX
- 220.0100
- 220.0200
- 220.0201
Eucon
- MPS-88R30
- MP-88R30
Hirose
- TM11
- TM21
- TM31
Nippon Seisen
- NSP624-S
Stewart
- SS-37000-002
Vertical Cable
- 012-021
|
Reviews
There are no reviews yet.