Content | 82292, Replacement Stylus for Sansui DT 55B, AN11, N 16D, ATN 3600 Kenwood V-66 and more
High Quality Needle aftermarket replacement for turntable SANSUI Kenwood, Mitsubishi and more
This stylus was used in the following turntables: Denon DP 300 F, DSN 85, Shiwti AL A 1 BK, Goldstar GCD 82 P, JVC / Nivico AL A 10, AL A 10 BK, AL A 110 BK, AL E 23, AL E 27 BK, AL E 300 BK, AL E 33, AL E 51, AL E 56 BK, AT 1059, DT 65, G 350, G 500 AV, G R 11, G X 100, G X 111, G X 222, GR 22, GX 2, GX 200, GX 300, GX 333, L A 100, L FX 4, MD 1055, QL A 220, SL 210, Kenwood V 78, Luxmann PD 210, Onkyo CP 1022 A, Sharp SC 7700 CDH MK II, SG FS 30 H, STY 155, Kenwood V 78, Uher Compact 444 CD, Compact 770 CD
The stylus is used in the following turntable cartridges: Dual DMS 235, DMS 239, Onkyo OC 63, OC 65, Sanyo MG 40, Yamaha CG 7700, CG 7800, CG 7900
Fits also for Aiwa AN 11, Akai RS 82, Teac N707, Toshiba N 16 D, Victor DT 55, DT 58, DT 59, DT 60, Yamaha N 707, N 7700, N 7800, N 7900
Specs:
Polished Spherical Diamond Tip 0.7mil
Tracking Force: 2.0 - 3.0 grams
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: Yellow
Fits the following models:
This stylus was used in the following turntables: Aiwa 855, Midi X 76 M, PX 800,PXE 55, PXE 70, PXE 77, PXE 770, PXE 80, PXE 800, PXE 850 E, PXE 855, PXE 860, V 770, XR 77E, Akai AP XE 80
The stylus is used in the following turntable cartridges: AT90, AT91, AT2001, AT2002, AT2003, AT2004, AT2005, AT2006, AT3000, AT3600, AT3600C, AT3600L, AT3601, AT3650, AT3650C, AT3650L, AT3651, Sanyo MG 40, Yamaha CG 7700, CG 7800, CG 7900
These are high-quality replacement styluses that are in no way inferior to the original.
Note: Please identify your stylus from the illustrations. The designations differ considerably depending on the manufacturer and only refer to the most commonly used types. The color is not decisive, it is important that the design matches.
EAN 4053171982022,
| Genuine Original Stylus for OM 30, OM 30 Super, OMP30, LM 30, Concorde 30, TM 30H
Nude Fine Line
Interchangeability/Upgrade Group: A | Stylus 3E
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-18.000 Hz + 2 / - 3 dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value | Stylus 2M Black
Technical data |
|
Frequency range |
20-31.000 Hz |
Frequency response |
20-20.000 Hz + 2 / - 0 dB |
Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
Compliance, dynamic, lateral |
22 µm/mN |
Stylus type |
Nude Shibata |
Stylus tip radius |
r/R 6/50 µm |
Tracking force range |
1,4-1,7 g (14-17 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
2M Black |
*) Typical value |
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
| DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
Reviews
There are no reviews yet.