Content |
The GQX-Series is available in three different configurations: the
GQX-1502 features two channels of fifteen-band 2/3 octave
equalization and a switchable high-pass filter. The GQX-3101
is a single-channel thirty-one band model, while the GQX-3102
features two channels of 1/3 octave EQ. Both the third-octave
models offer tunable high-pass filter circuits from 8Hz to 200Hz
and 10-segment, two color LED meter displays, referencing 0 VU
to +4dBu. Each model in the GQX-Series features switch-selectable
cut or boost of either 6dB or 15dB, and carry the same Five Year
Worry-Free Warranty offered on all commercial sound products
from Ashly.
The GQX models are designed to be significantly quiet without the
need for noise reduction to be built into the equalizer circuit.
Double-sided circuit boards with ground plane design are used
in the filter sections for improved RFI and electrostatic immunity.
Precision Wein-Bridge filters and carefully designed summing
amplifiers combine to provide extremely accurate response, low
noise, negligible distortion, and complete immunity to magnetic
fields. All filters exhibit true constant "Q" response with no
broadening near the "flat" setting. High slew-rate circuitry
throughout the signal path results in clean, quiet, transparent
sound. The faders used are a custom-manufactured metal-shaft
type, with molded saddle knobs, for the ultimate in reliability and
smooth "feel“. Ashly's unique "T-Beam" front panel construction
eliminates interconnections between the faders and the filters,
resulting in a very rugged and rigid front panel.
Input and output connections include barrier strip terminals and
1/4" TRS phone jacks, as well as standard locking XLR's. Circuit
ground may be lifted from chassis ground via the barrier strip.
Ashly's servo-balanced output circuitry maintains unity gain even
if pins 2 or 3 are connected directly to ground. Our transformer
and power supply design result in lower hum noise and even greater
line voltage range. In fact, these units still meet specifications
when voltage drops down to as low as 93 VAC, making them the
ideal choice when power stability presents a problem to the installer.
|
Precision Wein-bridge filters for accurate response and low distortion |
|
Constant "Q" design for low ripple and minimum interaction |
|
Selectable 15dB or 6dB range |
|
Switchable-Tunable Low Cut Filter |
|
10 position, 2-color LED level meter plus peak LED indicators |
|
High quality detented metal shaft faders |
|
Balanced Inputs and Outputs |
|
XLR, 1/4" TRS and Barrier Strip Audio Connections |
|
Rider friendly |
|
Five Year Warranty | | INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot)
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB
Dynamic Range: Typicall >112dB
Signal-to-Noise: Typically >95dB
THD+Noise: |
INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot)
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB
Dynamic Range: Typically >112dB
Signal-to-Noise: Typically >95dB
THD+Noise: |
* 2 channel 15 2/3 octave band graphic equalizer
* 25Hz - 16kHz frequency control * Constant Q circuitry
(3% frequency accuracy) * Selectable 6dB or 12dB control
* Variable level control * By-pass switch * Overload threshold LED (5dB below clipping) * Ground lift switch * XLR & 1/4" TRS balanced Inputs/Outputs * Power: Selectable 120V/220V voltage
* Dimensions: 1.75" H x 19" W x x 8.5" D / 44.5mm x 483mm x 216mm - 1 space r.m. * Weight: 4.5 lbs. / 2.5kg
XEQ-152 Specifactions:
* Input type: Active balanced / Unbalanced * Output Impedance: |
The class-A circuit used in the EQ-73 is similar to the eq section in the classical 1073 module, without the high pass filter. Additional frequencies have been added and the mid frequency band uses two inductors, the higher value of the second one is used for the two lowest frequencies, 160 Hz and 240 Hz, to achieve a suitable response.
The sound character is warm, punchy, sweet and musical. These classic characteristics have been heard on countless recordings through the years and it is a versatile sound that works very well on most sound sources and in most genres. The essence of this sound is now available at a surprisingly low cost, making it available to nearly everyone.
The EQ-73 has stepped frequency controls that offers a wide selection of frequencies from 20 Hz to 24 kHz.
The Low and High frequency bands are shelving and the mid frequency band is of the bell type.
The control range is +/-15 dB for the two lower bands and +/- 18dB for the high frequency band.
There are separate bypass switches for all three bands.
The EQ-73 is made to be used together with one of our PRE-73 models that has an Insert jack. It can also be used with many other units that has a low level insert jack.
Combining a PRE-73 and an EQ-73, and using a UNITE rack kit to mount them together, one will get a 19-inch 1073-style unit at a low cost and with a great sound!
FEATURES
- Vintage Style electronics. No intergrated circuits in the signal path
- 3-band with a dual inductor based mid frequency band
- Stepped frequency selection
- A wide selection of frequencies from 20 Hz to 24 kHz
- Control range up to +/- 18 dB
- Separate Bypass switches for each band
- Tantalum capacitors in the signal path
- Made to be used together with one of our PRE-73 models with an Insert jack or any other unit with a low level Insert jack
- TRS jack for in-and output connection, the nominal working level is around 18 dBu
- Selectable ground lift switch
- External power supply to avoid interaction with the audio circuits
- Great sound that suits most sound sources and genres
- A solid build quality that will last many years of normal use
|
- Professional 15-band stereo graphic equalizer for live and studio applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
- Ultra-low noise 4580 operational amplifiers for highest signal integrity
- Dedicated mono subwoofer output with adjustable crossover frequency
- Additional low-cut filter removes unwanted frequencies, e.g. floor rumble
- Highly accurate 4-segment LED output metering and input gain controls for easy level setting
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- “Planet Earth" switching power supply for maximum flexibility (100
- 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- 3-Year Warranty Program*
- Designed and engineered in Germany
|
Reviews
There are no reviews yet.