| Content | Proffesional wind up stand made of strenghtened steel loads up to 60kg. Installed ratchet lock protects fixed equipment against uncontrolled falling down and damage. Itʼs an ideal solution for mobile DJ and musicians.
Material: steel
Load capacity: 60 kg
Maximum height: 2,70 m
Base spread diameter: 1,54 m
Height: 1,60 m
Pipe diameter: 35 mm
Weight: 12 kg |
- Set of 4 Vari-Poles® in heavy duty carry bag
- Lightweight aluminium Vari-Pole® construction
- Variable length from 210 cm to 370 cm
- Bag of durable, water-repellent 600D nylon
- 10 mm foam padding and padded dividers
This set includes 4 Gravity Vari-Poles® made of lightweight, black anodized aluminium tubing with continuously variable length from 210 cm to 370 cm. They come in a dedicated heavy duty Vari-Pole® carry bag of water-repellent 600D nylon with 10 mm padding providing protection from bumps and dents. Padded dividers keep the clamping poles separate to prevent scratches, an interior mesh pocket offers plenty of space for accessories.
Product type
Stands and Tripods
Colour
Black
Weight
14,5 kg
GBGVARIPOLE4B - Gravity BG VARI-POLE 4® Transport Bag for 4 Gravity Vari-Poles®
Product type
Stands and Tripod Accessories
For number of stands
4
Type
Transport bag
For type of stand
Clamping rod
Colour
Black
Material
Nylon 600D
Thickness of the padding
10 mm
Latch
zip
Width
2150 mm
Height
430 mm
Depth
120 mm
Weight
3,5 kg
GLSVARIPOLE01B - Gravity LS VARI-POLE 01 B Clamping Pole Vari-Pole®, 2.10 - 3.70 m
Type
Clamping rod
Material
Aluminum
Tubing surface
anodized
Connection Surface
Powder coated
Transport length
2100 mm
Clamping Range
2100 - 3700 mm
Upper Tube Diameter
40 mm
Lower Tube Diameter
45 mm
Weight
2,2 kg
| If you have to mount headlights or speakers under time pressure in the hard day-to-day touring routine, you are perfectly equipped with the stable distance pole TLS P 431. It is part of the Gravity Touring series, which was especially designed for the high demands on stage.
The big advantage: Thanks to the automatic LockPin technology, set-up is done faster, because the height adjustment lock snaps into place automatically and no additional pin is required.
The connection between base and pole has been additionally reinforced with a stabilizing sleeve to prevent any wobbling. With the 35 mm extension tube that has an M10 female thread on top, you can extend the stand up to 2.40 meters and it will remain stable.
- Ideal for rental and event organizer
- Stabilizer sleeve for a better connection between base and pole
- 35 mm-extension tube with M10 inner thread
- Automatic LockPin locking system
- Maximum height: 2.40 m
Product type
Stands and Tripods
Tubing surface
Powder-coated
Height adjustment
Automatic LockPin®
Material of height adjustment
Steel
|
- Large lighting stand with crossbar and TV spigot adaptors (length 123 cm).
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
Steel
Truss material
Steel
Stand surface
Powder coated
Crossbar surface
Powder coated
Stand colour
Black
Crossbar colour
Black
Number of extensions
2
Min. height
1700 mm
Max height
3500 mm
Tube diameter
35 mm
Transport length
1410 mm
Max. load
45 kg
Holding fixture for TV Spigot
Yes
TV spigot
28 mm
Crossbar length
1230 mm
Tiltable crossbar
no
Weight
8,56 kg | Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) | - Adjustable height: 1450-3500mm
- Load capacity: 50kg |
Reviews
There are no reviews yet.