Content |
Condenser Gooseneck Microphone for Instrument Applications
-
Universal condenser microphone for acoustic instruments
-
Frequency response designed for string, brass, percussion and wind instruments
-
Cardioid polar pattern brings clarity and details
-
Flexible gooseneck shaft for effortless "sweet spot" positioning
-
Integrated XLR cable for extreme mobility during performance
-
Extremely high signal output lets the sound cut through
-
XLR phantom power adaptor
-
Effective wind and pop noise filters included
-
Compatible with most instrument clamps (not included)
-
Impact-resistant carrying case included
-
Rugged, reliable die-cast body construction
-
3-Year Warranty Program*
-
Designed and engineered in Germany
Specifications
Type |
Condenser
|
Frequency response |
200 Ω
|
Impedance |
1/8” TRS, unbalanced
|
Phantom power |
48 V
|
Connector |
3-pin
|
Polar pattern |
Cardioid
|
Sensitivity |
-50 dB ±3 dB @ 1 kHz (1 V / Pa)
|
Weight |
140 g
|
| The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps.
Technical Info
Type: Dynamic, Moving coil.
Freq.Resp.: 40 to 16.500 Hz.
Polar Pattern: Cardioid
Sensitivity (1000Hz): 1,7 mV/Pa*
(*1 Pa = 94 dB SPL)
Max SPL: 137dB
Impedance: 600 Ohm
Power supply: none
Connector: 3p. XLR male-type).
Net. Weight: 245 g
Dimensions: (Ø 32 mm x L 157 mm)
Accessories: 6 mtr balanced cable
with XLR plugs |
The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Features
- A highly consistent cardioid polar pattern
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS
Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Suggested Applications
Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording
|
Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin
Made in Germany
Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!
Flexible tool iN The studio
The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.
|
Legendary among harmonica players for its classic blues harp sound, the 520D's tradition is carried on by the 520DX "Green Bullet" and has a contoured size and shape that fits perfectly between harmonica and hands. - New volume control knob allows musicians to adjust the volume to fit each musical situation
- New rugged, dynamic cartridge with improved response
- High-impedance, omnidirectional
- Supplied with 1/4 inch connector
- Frequency response: 100 to 5,000 Hz
|
Complete With Stereo Bar, Windshield's and Cradle'
The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.
Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.
The kit comes complete in an all-metal 'Soundtool' Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens, an H50 stereo bar and an individually-measured chart showing the response curve of the microphone. See www.dv247.com Alternative Products and Related Products on this page for your options.
The C 414B-XLII has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. A classic microphone with a distinctive timbre especially designed for recording of solo vocals and solo instruments.
Whats the difference between the C 414B-XLII and the C 414 B XLS? The main difference between the two current C414 models lies in their frequency responses. The C 414B-XLII has a series of presence rises between 2.5 KHz and 9 KHz. This will make any recording with this microphone brighter or more sibilant than the original sound. This upper mid range boost is quite helpful on vocals and certain instruments such as classical acoustic guitars using nylon or natural strings. The C 414B XLS, see www.dv247.com Alternative Products on this page, has a very flat response that will not color the original sound which is important especially in instrumental recordings. It more suited for general use.
The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414B-XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.
The C 414B-XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems.
Features:
- High sensitivity and extremely low self noise
- Five switchable polar patterns for placement and application flexibility
- Two-color LEDs provide quick visual indication of selected polar pattern and output overload
- Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
- Supplied with Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens and an H50 stereo bar
- High sound pressure level capability, 140 - 158dB, and wide dynamic range
- Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
- Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
- All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions
Specifications:
- Type: 1" large diaphragm pressure gradient microphone
- Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
- Frequency Range: 20 to 20,000 Hz
- Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
- Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
- Preattenuation Pad: -6, -12,-18 dB, switchable
- Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
- Impedance: = 2,200 ohms
- Supply voltage: 48 V phantom power to DIN/IEC
- Current consumption: Approximately 4.5 mA
- Dynamic range: 134 dB minimum
- Environment Temperature range: -10° C to +60° C (14° F to 140° F)
- Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F)
- Connector: 3-pin XLR to IEC
- Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
- Net weight 300 g (10.6 oz.)
|
Reviews
There are no reviews yet.