Content |
The Behringer Monitor2USB is a monitor controller and USB audio interface designed for home and project studios. It pairs a large VCA control knob for your overall output level with the ability to select among three sets of active studio monitors, as well as two sets of headphones. With its USB jack, you can connect your computer straight to the device so that you may play music from your digital library, or you can mix straight from your DAW. Through its XLR inputs, you can route analog sound, balanced or unbalanced.
The VCA amplifier provides several benefits. For example, it allows DC current to flow through the volume control, rather than the audio signal, and thus, bypasses any DC-related signal degradation. This also helps in making sure your stereo image doesn’t drift as you crank the volume knob; anyone who’s experienced in monitor controllers knows this can be a problem—a problem mitigated in the Monitor2USB. The volume knob itself is quite large, and this too serves a function: Such a large size allows for more precision as you turn the control, so you can achieve minutely specific level adjustments, which might be necessary as you switch from monitoring post-production projects to music mixes.
You can use its three sets of outputs in a variety of ways—for instance, you can hook up two monitors and a subwoofer, or three sets of monitors, one of which can serve as your dedicated mono check. On the headphone outputs, a crossfeed control mimics the stereo experience of sitting in front of your speakers by feeding a miniscule amount of signal from the right to the left and vice versa. Amongst other benefits, this feature helps mitigate ear fatigue over long sessions. Mono and Dim buttons are on hand to help you in the mixing process. Included with the Monitor2USB are a power cable and a full, complimentary copy of Tracktion—a DAW to help you in your recording, editing, and mixing journeys.
Key Features at a Glance
- Large volume knob with VCA control for precise level adjustments
- Built-in stereo USB audio interface
- 2 high-quality stereo inputs
- 3 independent monitor outputs to connect two stereo monitors and one mono monitor
- 2 headphone amplifiers with separate volume controls
- Crossfeed control emulates the stereo speaker panorama when listening through your headphones
- Convenient Mono and Dim functions
- Included eco-friendly power supply
- Designed and engineered in Germany
Analog Inputs |
2 x XLR (input set 1) 2 x XLR (input set 2) |
Input Impedance |
20 kOhms balanced, 10 kOhms unbalanced |
Input Sensitivity |
Input Set 1: +4 dBu Input Set 2: +4 dBu / -10 dBV |
Analog Outputs |
Monitor Out A: 2 x XLR, balanced Monitor Out B: 2 x XLR, balanced Monitor Out C: 1 x XLR, balanced Phones: 2 x 1/4" TRS, phone type |
USB |
USB 1.1, type-B |
D/A Conversion |
44.1 / 48 kHz |
Frequency Response (-3 dB) |
< 10 Hz to 120 kHz |
SNR |
85 dB at 0 dB, A-weighted |
CMRR |
> 50 dB at 1 kHz, 0 dBu input level, unity gain |
THD+N |
0.03% at 1 kHz, 0 dBu input level, unity gain |
Crosstalk |
> 75 dB at 1 kHz |
Attenuation |
Dim: -15 dB |
Power Supply |
100 to 240 VAC, 50 / 60 Hz |
Dimensions (H x W x D) |
3.3 x 8.5 x 7.8" / 84.0 x 216.0 x 199.0 mm |
Weight |
3.3 lb / 1.5 kg |
| The Nowsonic Shock Stop M is a budget solution for optimizing the sound in your studio. The absorbers are designed to eliminate the transfer of vibrations from your studio speakers to the stand surface. They are therefore a simple and effective way to protect against resonance and provide a more linear transmission. The modular design also means different dispersion angles can be achieved.
Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: M
- Dimensions: 250 x 320 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
| CMC2 - Compact Monitor Controller
COMPACT, ACCURATE & AFFORDABLE.
The CMC2 is a compact monitor controller that has been designed to provide the same top quality audio, transparency and accuracy of Drawmer's other monitor controllers, such as the MC2.1 and MC3.1, whilst retaining all the necessary features that the smaller project studio would require without the cost of the advanced features that would seldomly be used.
Can you trust the audio that your current monitor controller is providing? Is it colouring the sound? For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller.
Accurate & Transparent
With the same Drawmer pedigree as the MC2.1, the CMC2 circuit is just as transparent and accurate. It's switches and paralleled custom-quad knobs have excellent channel matching, a smooth feel.
You hear exactly what you've recorded!
Multiple Connections
The CMC2 is very well connected: with 2 Stereo balanced jack inputs, plus a 3.5mm jack for your Smartphone/MP3 Player, with variable level control. It supports 2 sets of stereo monitors plus a sub-woofer, each with individual switches so you can activate them in any order, especially useful for A/B comparisons.
In addition, it has a professional quality headphone output with a separate amplifier and level control, that provide the same audio quality and mix checking as the CMC2 does through the speakers.
Key Mix check features such as Phase Reverse, Mono, Dim & Mute are also included, to enable you to examine the quality of your recordings with ease.
Compact
The CMC2 packs a lot of features into a small package. With a footprint of just 18x16cm and a very low profile the CMC2 won't hog your desk space like some other controllers do. And if your on the move it's small enough to pop into a bag to take anywhere.
Tough & Secure
Whilst being smart and stylish the rugged, all steel enclosure will withstand the knocks and bumps of the studio, and, coupled with the high quality components used, the CMC2 is built to last. In addition, a Kensington security slot provides protection from thieves.
Features:
- Ultra low noise and transparent circuit design.
- Source switches can be active in any combination. 3 Inputs in Total - Two on ¼” balanced jacks and One 3.5mm Front Panel Aux for your Smartphone/Mp3 Player.
- 2x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons.
- Timed relay protection on all speaker outputs to prevent power up/down bangs.
- A large volume knob incorporating a parallelled custom quad pot for excellent channel matching and smooth feel.
- A Headphone Amplifier with Individual Level Controls with easy access to the jack on the front.
- Front Panel 3.5mm AUX Input with Level Control for connecting MP3 player, smartphone or tablet etc.
- Mix Checking facilities Include Dim, Phase Reverse and Mono, as well as an easy access Mute switch.
- Kensington security slot (also called a K-Slot or Kensington lock).
- Very low profile desktop enclosure with a footprint of just 18x16cm.
- Stylish and Rugged Enclosure will withstand the knocks of the studio.
|
Sold in pairs, each PreSonus ISPD-4 isolation pad can be divided into halves and configured in several ways so you can use them with virtually any near-field studio monitors. For small, vertically placed speakers, use half of an isolator per side or employ the full pad, whichever works best. Place two half-pads side-by-side to accommodate larger speakers or horizontal placement.
The speakers shown on the photographs are sold separetely. |
- All-passive volume control circuit
- Stereo and AUX inputs
- Dual outputs
- Additional mono output
- Balanced and unbalanced connection
- Integrated high quality headphone amplifier
- Mono, mute and PFL switches
- Stereo volume, AUX and headphone level controls
- Elegant design with solid wood side panels
- Built to last
The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply.
Symmetric combo sockets serve as stereo input. The Monicon® L’s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation.
Product type
Other Studio and Recording Equipment
Channels
2
Inputs
2
Input connectors
3.5 mm TRS , RCA , XLR
Input type
balanced/unbalanced (depending on TS/TRS connection)
Max. input level
20 dBu
Input impedance
(balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)
Outputs
3
Output connectors
XLR
Output type
balanced/unbalanced (depending on TS/TRS connection)
Max. output level
20 dBu
Output impedance
600 Ohm(s)
Frequency response
10 - 40000 Hz
THD
0.001 %
Max. attenuation
(Attenuator + Mute) 112 dB , (Attenuator) 85 dB
Controls
attenuation , input selector , mono , mute , output selector , PFL source
Cabinet material
sheet steel , wood
Cabinet surface
Powder coated
Width
218 mm
Height
77 mm
Depth
100 mm
Weight
1,14 kg |
Bluetooth In.
Balanced Audio Out.
Turn any professional speaker into a Bluetooth speaker!
Convenience
Ditch the adapters.
Kali Audio’s MV-BT lets you use your Bluetooth devices with professional speakers, mixers, controllers, and interfaces. Just pair your device by pressing the Kali logo on the front, and use your preferred balanced connector to connect to your system.
Pairing Button
Press the Kali logo to pair.
LED Display
Blue light indicates volume level.
Weighted Knob
Enjoy precise control over the volume level at your fingertips. Volume control is independent, so you can leave volume on your device at full.
Balanced Outputs
Connect to speakers, mixers, controllers, or interfaces with whatever cables you already use.
Specifications
| |
Channels: |
2 |
Inputs: |
Bluetooth, 3.5mm (AUX) |
Outputs: |
2 x XLR, 2 x TRS |
Height: (Shipping) |
80mm (84mm) |
Length: (Shipping) |
134mm (138mm) |
Width: (Shipping) |
130mm (154mm) |
Weight: (Shipping) |
.5kg (.6kg) |
In the Box: |
MV-BT, Local Power Wall Wart |
|
Reviews
There are no reviews yet.