| Content | • Professional air cushioned speaker stand with Ø35mm pole. Made of steel and aluminium to grant the necessary weight, the maximum robustness and stability
• Height adjustment by automatic pushbutton and safety knob
• Central joint, legs link base and pneumatic valve made of loaded nylon
• Non-slip rubber feet with a special design specifically studied to reduce the vibrations transmission
• Aluminium telescopic tube with anti-rotation groove and equidistant holes
• Sturdy steel legs with a special slot that allows a total closure of link bars to grant safety and space saving
| Height |
min 133,5 - max 210 cm |
| Spread |
max 120 cm |
| Weight |
4 Kg |
| Carriage capacity |
90 Kg |
| Master carton (pcs) |
6 |
| Volume (cbm) |
0,196 |
| Color |
black - orange |
|
Pneumatic aluminium stand for acoustic speakers and lightenings.
Silver anodyne finishings Height Min. 127 - Max. 210 cm.
Available finishings: Silver anodyne and black colour. |
The Original Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to its over-sized heavy wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand - they're strong, sturdy, lightweight, and 100% field serviceable. You can choose between a black or silver finish with the TS-80B and TS-80S or the TS-88B, which has a black finish and is about two and a half feet taller than the TS-80B and TS-80S. The Original Series tripod speaker stands from Ultimate Support are the industry standards that you've seen on stages for decades.
TS-80B Product Breakdown:
Patented Tripod Design
Over-sized Heavy Wall Aluminum Tubing
100% Field Serviceable Parts
Patented Die-cast Metal Collar on TLF
Patented Tripod Design
The TS-80's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.
Over-sized Heavy Wall Aluminum Tubing
The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-80 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.
100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-80 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-90, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!
Patented Die-cast Metal Collar on TLF
The strongest leg fitting made, the collar on the TS-80's tripod leg fitting (TLF) prevents over-tightening and breakage issues associated with all plastic designs. It also features a Quick Release design allows faster setup, and the same force to be applied every time (similar to the same type of design used n most high-end bicycle seat posts). Plus, our die-cast fitting is 30x stronger than ABS or Nylon plastic used by the competition.
Part Name: TS-80B
Part Number: 13904
Color: Black
Height: 3'8" - 6'7" (1118 mm - 2007 mm)
Weight: 7.3 lbs. (3.3 kg)
Base Diameter: 47" (1194 mm)
Telescoping Tube Diameter: 1.5" (38 mm)
Adapter Diameter: 1.375" (35 mm)
Load Capacity: 150 lbs. (68.2 kg)
Folded: 43.5" x 5.5" (1105 mm x 140 mm) |
Glass reinforced polycarbonate fitting at the leg juncture uses a Metal clamp over the fitting to
minimize over-tightening and breakage. Unique to the TS-90 tripod is the use a Lock Lever, which
speeds up set-up and gives a visual warning is it is not set up right.
TeleLock the exclusive feature of TS-90 stands allows one person to safely and easily raise and
lower heavy speakers. When the rotating collar is set to the raise position it lock and holds the
speaker in place with each lift. When you have the speaker at the right hieght rotate the collar to
LOCK and your set. To lower rotate the collar to the LOWER position to assist with the safe
lowering of the speaker.
The footcaps are held in place by both internal and external friction so they stay on gig after gig.
TS-90 series stands also feature our new connector tube, which telescopes up to accommodate
1 3/8" speaker sockets and down for 1 ½" sockets. Locks firmly into desired position. Minimizes
the need for adapters. Our telescoping tube lock prevents accidentally pulling out the center tube.
HEIGHT....3?8?-6?7?
WEIGHT....6lbs/ 2.72 kg./ 4oz
BASE DIAMETER....47?
WEIGHT RATING....150
| Speaker Aluminium Stand. Made by Bespeco. Black Color. Adjustable through security knob and pin. Compatible with BAG1000SP. Professional speaker stands, made in steel. Knob and hinge blockage system.
Aluminium speaker stand, black colour, max height 1,87m & weight 2,9kg.
- Height: min 118 - max 187 cm
- Spread: max 128 cm
- Carriage Capacity: 30 Kg
|
Steel speaker floor stand with folding base and telescopic rod, tube diameter 35mm.
Equipped with damping system and safety plug; central die-cast joint.
| GENERAL SPECIFICATION |
|---|
| Tube diameter: | 35 | mm | | Load capacity: | 60 | kg |
| PHYSICAL SPECIFICATION |
|---|
| Length once folded: | 1230 / 48.42 | mm/inch | | Height: | 2400 / 94.48 | mm/inch | | Width: | 1300 / 51.18 | mm/inch | | Depth: | 1300 / 51.18 | mm/inch | | Net Weight: | 8.14 / 17.94 | Kg/Lbs |
| SHIPPING INFORMATION |
|---|
| Package height: | 1265 / 49.8 | mm/inch | | Package width: | 150 / 5.9 | mm/inch | | Package depth: | 150 / 5.9 | mm/inch | | Shipping Weight: | 8.81 / 19.42 | Kg/Lbs |
|
Reviews
There are no reviews yet.