| Content |
Beyerdynamic Headphones DT 100
The DT 100 headphone is widely used in audio recording and monitoring applications in studios worldwide.
It is also intended for use in ENG/EFP field work, on-air commentary and in any other situation which needs to address the challenges of today's digital and technological advances. The DT 100 offers a high degree of comfort and can be worn for hours without listener fatigue. The soft ear cushions effectively seal out ambient noise yet apply minimal pressure against the ear.
Specifications:-
* Transducer type Dynamic
* Operating principle Closed
* Frequency response 30 - 20,000 Hz
* Nominal impedance acc. to IEC 60268-7 16 ? ± 10% per cartridge
* Nominal SPL acc. to IEC 60268-7 94 dB
* Nominal THD acc. to IEC 60268-7
* Power handling capacity acc. to IEC 60268-7 1000 mW
* Sound coupling to the ear Circumaural
* Ambient noise isolation 20 dB (A)
* Average pressure on ear acc. to IEC 60268-7 4.5 N
* Weight without cable 350 g
|
Operating Principle: Closed
Transmission Type: Wired
Earpad material: Protein leatherette cover, memory foam filling
Nominal Impedance Headphones: 32 ohms
weight headphones without cable: 360 g
Headphone frequency response: 5 - 50,000 Hz
Nominal sound pressure level: 100 dB (1mW)
Sound coupling to the ear: Circumaural (around the ear)
Cable & Plug: 1.40 straight cable (double-sided), OCC 7N copper, textile braided, 3.5 mm jack plug with 6.35 mm jack adapter
|
HSD 171 without cable
Professional headset with hypercardioid, shock mounted, speech optimized,
dynamic microphone. Main application: Live sound use. The microphone?s
frequency range is 60-17,000 Hz with a sensitivity of 1 mV/Pa (-60 dBV).
Impedance is 600 ohms. The headphone?s impedance is 55 ohms with an
audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back with self-adjusting
headband. Microphone arm is swivelling through 270 degrees for left or right-hand
use with integrated mute switch.
Net/shipping weight: 255/725g (9/25.4 oz.) | K 240 Studio
The Studio version of these classic hi-fi stereo headphones uses XXL speakers
with Varimotion diaphragms for higher sensitivity, a wider dynamic range, and
higher sound levels. Other features include semi-open earphones, a solid bass
range, clear highs, and excellent comfort.Also connects to portable equipment
(CD players, DAT recorders, notebook computers, etc.)
SPECIFICATIONS:
General Specifications
Headphone type: semi-open
Max. Input Power: 200 mW
Sensitivity headphones: 104 dB SPL/V
Rated Impedance: 55 Ohms
Detachable cable: yes
Cable Length: 3 m
Earpads replaceable: yes
Audio Specifications
Maximum input power: 200 mW
Audio frequency bandwidth: 15 - 25000 Hz
Dimensions
Length: 110 mm
Width: 190 mm
Height: 200 mm
Net Weight: 240 g
Audio Interface
Type: Stereo plug – 3.5mm (1/8-inch) with 6.3 mm (1/4") screw-on adapter
Gender: Male
Contacts: 3-pin
Cable
Detachable: Yes
Wearing Style
Over-ear: Yes
Application
Studio Mixing: Yes
Hi-Fi Listening: Yes
Foldable
Not foldable: Yes
Cup Style
Semi-open: Yes | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
The SRH440 Professional Studio Headphones from Shure provide exceptional sound reproduction and comfort.
Optimized for home and studio recording, SRH440 headphones reproduce accurate audio across an extended range.
Impedance, power handling and sensitivity are all calibrated for professional audio devices such as DJ mixers, mixing consoles, and headphone amplifier. Includes carrying bag and threaded 1/4" (6.3mm) gold plated adapter.
Enhanced frequency response delivers accurate audio across an extended range
Impedance and power handling optimized for perfomance with professional audio devices
Adjustable headband and collapsible construction provide comfort and portability
Bayonet clip securely locks detachable cable into ear cup
Sensitivity
105 dB
Maximum Input Power
500 mW
Frequency Response
10 Hz - 22 kHz
Weight
9.6 oz (272 g)
Cable Length
3 meters (9.84 ft)
Cable Style
Detachable coiled oxygen-free copper
Plug
Gold-plated 1/8" (3.5 mm) stereo mini jack
|
Reviews
There are no reviews yet.