| Content | Professional PAR can with 108 ultra-bright LEDs (36 x red, 36 x green, 36 x blue) and RGB colour system in a sturdy aluminium housing and a beam angle of 25 degrees. Featuring a double bracket, the CLP 56 RGB 10 PS is suitable for use both as a floor PAR and for mounting to cross-beams and bars.
It is actuated either via DMX protocol (3-pole XLR) with three and six control channels, in master/slave mode or in standalone mode (sound control, colour change, solid colours). It is controlled by three buttons and an LED display.
The power consumption of the CLP 56 RGB 10 PS is a mere 20 Watts.
- 108 ultra-bright 10-mm LEDs in RGB
- Beam angle of 25 degrees
- Low power consumption of just 20 Watts
- Operated via DMX, in master/slave or standalone mode
- Double bracket included as standard
- Cooling method: Heat sink
- Conventional, sturdy housing
Specifications
- Product: LED Par Can
- Type: PAR56
- Colour Range: RGB
- Number of LEDs: 108 (36 x red, 36 x green, 36 x blue)
- LED Type: 10 mm
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 4/6-channel selectable
- DMX Functions: RGB, Master Dimmer, Strobe, Sound Control, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 230 V
- Power Consumption: 20 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Polished
- Dimensions (without mounting bracket): 230 x 250 x 260 mm
|
Info
EUROLITE LED panel 40
|
Info
LED Neon Flex 230V white 5000K 91cm
|
The Cameo CLPFLATPRO18IP65 is purpose designed for outdoor use and rated IP65 according to EN 60529. With a powerful illuminance of 23,000 lux and a silent, passive cooling design the super slim professional PAR light is the perfect choice where space is limited. It features 18 ultra bright high performance 10 watt LEDs for impressive, rich RGBWA colour mixing, a 30° beam angle and 3,000 Hz refresh rate to eliminate flicker.
The CLPFLATPRO18IP65 provides master, slave and standalone capability and a total of 5 DMX modes with numerous functions, integrated programs and an LED Display with mode, enter, up and down controls for easy manual operation.
The Cameo CLPFLATPRO18IP65's black die-cast enclosure is protected against dust and low pressure water jets from all directions. It includes dedicated screw connectors for DMX signal and power input and output for daisy-chaining up to 10 units. The universal bracket offers a wide variety of mounting options.
- Colour Range: RGBWA
- Number of LEDs: 18
- LED Type: 10 W
- Beam Angle: 30°
- DMX Input: XLR 3-pole, XLR 5-pole
- DMX Output: XLR 3-pole, XLR 5-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: LED Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 200 W
- Power Connector: 3-pin special screw connector
- Housing Material: Metal
- Housing Colour: Black
- IP Class: 65
- Type of cooling: Convection
- Illuminance (lx 1m): 23000 lx
- Dimensions (without mounting bracket): 280 x 280 x 160 mm
|
18 x 8W QUAD Colour LED RGBW PAR Can in black housing
Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.
It is operated using four buttons and an LED display on the back.
The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.
There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.
The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.
- Type: Studio PAR 64
- Colour spectrum: RGBW
- Number of LEDs: 18
- LED type: 8 W QUAD colour
- Refresh rate: 5000 Hz
- Beam angle: 25°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin male
- DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
- DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
- Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED display
- Power supply: 110 V AC - 250 V AC
- Power consumption: 170 W
- Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
- Housing material: metal
- Housing colour: black
Dimensions without mounting bracket
- Width: 230 mm
- Height: 220 mm
- Length: 255 mm
|
Info
Reflection FullSpectrum Reflection is a revolutionary (patents pending) static LED fixture that brings an entirely new concept to this field of lighting: a compact, interchangeable, and modular light source ? just like a lamp in conventional fixtures ? that creates unmatched intensity by directing light from a unique combination of LEDs onto a parabolic reflector. This design also eliminates problems such as RGB dots and multi-coloured shadows which have plagued many other designs, delivering a unique, uniformly-coloured light beam. By moving the light source in relation to the reflector, this beam can also be zoomed smoothly via DMX from 10° to 17° (1/2 peak angle), 16° to 25° (1/10 peak angle).
|
Reviews
There are no reviews yet.