Content | |
The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality
Features Rigid MDF cabinet 70W RMS amplifier 8-inch long-throw woofer Individual controls to tailor volume, crossover frequency and phase adjustment
Sensitivity 180mV for full power output Frequency response 34Hz - 150Hz Rated output power 70W Drive units 1 x 8" (203mm) long throw woofer Crossover 50 - 150Hz continuous/active Max. power consumption 100W Colour Black Dimensions (WxHxD) 300 x 300 x 310mm (11.8 x 11.8 x 12.2“) Weight 7.7kg (17lbs) |
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment Low Frequency Limit: 18 Hz Upper Frequency Limit: 40 - 120 Hz Variable Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) Amplifier Power Output 650 watts Continuous. 1200 watts (peak) Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu) Equalisation 4 Settings (Off/Music/Movie/Impact) Phase Control 0-90-180-270 degrees Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed Digital Volume Level -60 to +10dB in 1dB increments Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension 3” long throw voice coil 12V Trigger Input 3.5mm mono jack socket Connections Stereo RCA in/out LFE in/out 12V Trigger in (3.5mm mono jack) LEO* - 3.5mm Microphone input jack (microphone supplied) Input Impedance 20 kohms Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches) Grille Depth 28 mm (1 1/8 Inches) Weight (unpacked) 35.3 kg (77.6 lbs) Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset) Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant) Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific) IR Remote Control Code NEC SH6122 AVAILABLE IN SIX COLOR FINISHES
|
Length No
Accessories Mic, mic stand, remote control
Amplifier 390 watts Dynamic/195 watts RMS Power
Auto On/Off Yes
Cabinet Design Extended Excursion Down-firing port
Color Black Ash Wood Grain
Dimensions: (H/W/D) 16.75” x 15.25” x 17” (includes feet and grille) (42.5 x 38.7 x 43.1 cm)
HiPass Crossover 80 Hz, 6 dB/octave
LoPass Crossover 40 - 120 Hz adjustable (12 dB octave, 24 dB ultimate)
Phase Control 0, 90, 180, 270 Degrees
Removable Grille Yes
Shipping Weight 39 lbs. (18 Kg)
Size Large
Voice Coil 2-Layer copper
Warranty (N. Am.) Two years (electronics & drivers - parts & labor)
|
Impact Series: High Performance, High Value Subwoofers
The down-firing port on the Impact-12 gives more bass output with less distortion than similarly priced subwoofer from other companies. With its 275 watts of amplifier focused on the 29 Hz to 140 Hz frequencies, you get a ton of bass for you dollar. You can blend the Impact-12 with your satellite speakers using the adjustable low pass crossover frequency feature. All this great sound is wrapped up in an attractive black ash wood grain colored cabinet with black gloss trim.
Features
- Compact, stylish cabinet; high-value subwoofer
- High quality, long throw drivers
- 12" forward firing coated fiber woofer
- Down-firing port minimizes distortion
- 2" copper-wound voice coils for exceptional reliability
- “Green” MDP amp rated at 275 watts Dynamic power
Length |
No |
Accessories |
N/A |
Amplifier |
165 watts RMS, 275 watts Dynamic Power |
Auto On/Off |
Yes |
Cabinet Design |
N/A |
Color |
Black Ash Wood Grain |
Dimensions: (H/W/D) |
15.1" x 14.2" x 18.9" (38.4 x 36 x 48 cm) |
Frequency Response (+/-3 dB) |
29-140 Hz |
HiPass Crossover |
Full Range |
LoPass Crossover |
50 Hz-200 Hz |
Phase Control |
0, 180 Degrees |
Removable Grille |
Yes |
Shipping Weight |
33 lbs. (15 kg) |
Size |
Large |
Voice Coil |
2" dual layer copper-wound |
Warranty (N. Am.) |
Two years (electronics & drivers - parts & labor) |
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby
Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
|
Reviews
There are no reviews yet.