CELESTION G12P SEV 80-8 12″ Speaker 80 W 8 Ohm

This speaker meets the expanded frequency range often requested by the new generation of amp manufacturers.
The Seventy 80 is detailed and crisply defined, with a tightly controlled lowend and punchy, aggressive upper midrange. The top-end response is also subtly increased. Used singly, in pairs or quartets - it is capable of reproducing a wide range of sounds and styles whilst adding the undeniable Celestion character to any amp.

General Specifications
Nominal diameter: 12“, 305 mm
Power Rating: 80 W
Nominal impedance: 8 Ohm
Sensitivity: 98 dB
Chassis type: Pressed steel
Voice coil diameter: 1.75“, 44.5 mm
Voice coil material: Round copper
Magnet type: Ceramic Magnet
Frequency range: 85-5000 Hz
Resonance frequency, FS: 103 Hz
DC resistance, Re: 5.4 Ohm & 11.78 Ohm
Mounting Information
Diameter: 12.2“, 309 mm
Overall depth: 4.7“, 119 mm
Magnet structure diameter: 5.3“, 134 mm
Cut-out diameter: 11.1“, 283 mm
Mounting slot dimensions 0.31“, 7.9 mm Ø
Number of mounting slots: 4
Mounting slot PCD: 11.7“, 297 mm

• Neodymium Coaxial Transducer
• 98 dB Sensitivity 1 W / 1 m
• 500 W + 80 W Power Handling
• 3" Copper Sandwich Voice Coil
• Triple Aluminum demodulating Rings
• Elliptical 80° x 60° Waveguide for precise directivity
• Single Point Source providing coherent Wave Front
• Very high SPL, superb Quaity Sound
• Optimal for compact 2-way Systems

• Nominal Basket Diameter 12", 304.8 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 250 W / Music Program 500 W
• Resonance 47 Hz
• Usable Frequency Range 43 Hz - 3.8 kHz
• Sensitivity 98
• Magnet Weight 38 oz.
• Gap Height 0.312", 7.92 mm
• Voice Coil Diameter 2", 50.8 mm

• Resonant Frequency (fs) 47 Hz
• DC Resistance (Re) 5.0
• Coil Inductance (Le) 0.64 mH
• Mechanical Q (Qms) 6.00
• Electromagnetic Q (Qes) 0.50
• Total Q (Qts) 0.46
• Compliance Equivalent Volume (Vas) 120.1 liters / 4.2 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 237 cc
• Mechanical Compliance of Suspension (Cms) 0.29 mm/N
• BL Product (BL) 10.8 T-M
• Diaphragm Mass inc. Airload (Mms) 40 grams
• Efficiency Bandwidth Product (EBP) 94
• Maximum Linear Excursion (Xmax) 4.4 mm
• Surface Area of Cone (Sd) 538.9 cm²
• Maximum Mechanical Limit (Xlim) 11 mm

• Recommended Enclosure Volume Sealed 25.5-35.4 liters, 0.9-1.25 cu.ft. Vented 36.8-139 liters/1.3-4.9 cu.ft.
• Overall Diameter 12.03", 305.5 mm
• Baffle Hole Diameter 10.95", 278.1 mm
• Front Sealing Gasket standard fitted as standard
• Rear Sealing Gasket standard fitted as standard
• Mounting Holes Diameter 0.25", 6.4 mm
• Mounting Holes B.C.D. 11.59", 294.3 mm
• Depth 4.57", 116 mm

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Vented and extended core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition paper dust cap

Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.

With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.

• Nominal Basket Diameter 12“, 304.8 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 400 W / Music Program 800 W
• Resonance 55 Hz
• Usable Frequency Range 54 Hz - 5 kHz
• Sensitivity 98.3
• Magnet Weight 56 oz.
• Gap Height 0.375“, 9.53 mm
• Voice Coil Diameter 2.5“, 63.5 mm

• Resonant Frequency (fs) 55 Hz
• DC Resistance (Re) 6.3
• Coil Inductance (Le) 0.74 mH
• Mechanical Q (Qms) 5.27
• Electromagnetic Q (Qes) 0.46
• Total Q (Qts) 0.43
• Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
• Peak Diaphragm Displacement Volume 125 cc
• Mechanical Compliance of Suspension 0.21 mm/N
• BL Product (BL) 13.5 T-M
• Diaphragm Mass inc. Airload (Mms) 39 grams
• Efficiency Bandwidth Product (EBP) 120
• Maximum Linear Excursion (Xmax) 2.4 mm
• Surface Area of Cone (Sd) 519.5 cm²
• Maximum Mechanical Limit (Xlim) 9.9 mm

• Recommended Enclosure Volume Sealed N/A Vented 25.5-85 liters/0.9-3 cu.ft.
• Overall Diameter 12.03“, 305.5 mm
• Baffle Hole Diameter 10.95“, 278.1 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.25“, 6.4 mm
• Mounting Holes B.C.D. 11.59“, 294.3 mm
• Depth 5.35“, 136 mm

• Aluminum voice coil
• Polyimide former
• Ferrite magnet
• Vented core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition felt dust cap