Content |
This speaker meets the expanded frequency range often requested by the new generation of amp manufacturers.
The Seventy 80 is detailed and crisply defined, with a tightly controlled lowend and punchy, aggressive upper midrange. The top-end response is also subtly increased. Used singly, in pairs or quartets - it is capable of reproducing a wide range of sounds and styles whilst adding the undeniable Celestion character to any amp.
General Specifications
Nominal diameter: 12“, 305 mm
Power Rating: 80 W
Nominal impedance: 8 Ohm
Sensitivity: 98 dB
Chassis type: Pressed steel
Voice coil diameter: 1.75“, 44.5 mm
Voice coil material: Round copper
Magnet type: Ceramic Magnet
Frequency range: 85-5000 Hz
Resonance frequency, FS: 103 Hz
DC resistance, Re: 5.4 Ohm & 11.78 Ohm
Mounting Information
Diameter: 12.2“, 309 mm
Overall depth: 4.7“, 119 mm
Magnet structure diameter: 5.3“, 134 mm
Cut-out diameter: 11.1“, 283 mm
Mounting slot dimensions 0.31“, 7.9 mm Ø
Number of mounting slots: 4
Mounting slot PCD: 11.7“, 297 mm
|
2000 W continuous program power capacity |
|
100 mm (4 in) copper voice coil |
|
45 – 1000 Hz response |
|
95 dB sensitivity |
|
Aluminium demodulating ring allows a very low distortion figure |
|
Double silicone spider with optimized compliance |
|
Ventilated voice coil gap for reduced power compression |
| |
- Neodymium Coaxial Transducer
- 98 dB Sensitivity 1 W / 1 m
- 500 W + 80 W Power Handling
- 3" Copper Sandwich Voice Coil
- Triple Aluminum demodulating Rings
- Elliptical 80° x 60° Waveguide for precise directivity
- Single Point Source providing coherent Wave Front
- Very high SPL, superb Quaity Sound
- Optimal for compact 2-way Systems
|
- Neodymium Coaxial Transducer
- 98 dB Sensitivity 1 W / 1 m
- 500 W + 80 W Power Handling
- 3" Copper Sandwich Voice Coil
- Triple Aluminum demodulating Rings
- Elliptical 80° x 60° Waveguide for precise directivity
- Single Point Source providing coherent Wave Front
- Very high SPL, superb Quaity Sound
- Optimal for compact 2-way Systems
|
Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.
The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 50W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 100dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Round copper | Magnet type | Alnico | Frequency range | 75-5000Hz | Resonance frequency, Fs | 75Hz | DC resistance, Re | 6.4Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 6.5“, 165mm | Magnet structure diameter | 5.0“, 128mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 9.3lb, 4.2kg |
|
Reviews
There are no reviews yet.