| Content |
The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.
The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push -to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows "home run” or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system.
• Programmable Volume Control
• Program or Scene Selection
• Programmable Contact Closure Interface
• Up to 1000 ft. on CAT 5 Cable
• Programmable Push-To-Talk Paging
• Programmable Source Selection |
The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.
| Power Source | 24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system) | | Current Consumption | 120 mA (RM-300MF), 660 mA (with 3 RM-320F connected) | | Frequency Response | 200 Hz - 15 kHz | | Distortion | 1 % or less | | S/N Ratio | 55 dB or more | | Microphone | Unidirectional dynamic microphone with talk key, compressor (on/off switchable) | | Volume Control | Microphone volume control, Buzzer volume control | | Connection Cable | Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal | | Maximum Cable Distance | Total 800 m (874.89 yd) | | No. of Connectable RM-320F | Max. 3 units | | Operation | Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch | | Indicator | Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator | | Operating Temperature | -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F) | | Operating Humidity | 5 % to 95 %RH (no condensation) | | Finish | ABS resin, blueish gray (PANTONE 538 or its equivalent) | | Dimensions | 200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“) | | Weight | 1.1 kg (2.43 lb) (with wall mounting bracket unit) | | Accessory | Wall mounting bracket unit …1, Wall mounting screw …2 |
|
![]() - CONVENIENT INSTALLATION AND CONSTRUCTION WITHOUT NEED OF ID SETTING. - ADOPTION OF RS-422 COMMUNICATION METHOD TO SUPPORT A LONG DISTANCE. - REMOTE CONTROL FOR ZONE VOLUME AND SELECTION OF BGM. - INDEPENDENT LOCAL MIC AND BGM BROADCASTING. ![]() | | | Audio Output | 0dB(Balanced) | | Audio Input | Paging & RM MIC & LM MIC | -50dB(Balanced) | | BGM(Main & Local) | -10dB(Balanced) | | Tone Control (100Hz & 10kHz) | Paging MIC | ± 10dB | | Audio Output | ± 12dB | | Frequency Response | BGM | ± 3dB | | MIC | ± 3dB | | S / N | BGM | Better than 75dB | | MIC | Batter than 65dB | | T.H.D. | BGM | Less than 0.05% | | MIC | Less than 0.05% | | Priority Control | Paging MIC > DRP > RM1> RM2 > RM3 > RM4 > LM-8000 > Main BGM | | Phantom Power | DC 24V | | Serial Interface | Communication Speed | 9600bps | | Communication Distance | Maximum 300m(UTP CAT%) | | Operation Temperature | -10℃ ~ +40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Weight(SET) | 130g / 0.28lb | | Dimensions(SET) | 70(W) x 114(H) x 52(D)mm 2.8(W) x 4.5(H) x 2.0(D)in | | ※ Specifications and design subject to change without notice. |
|
Volume Control 12W with priority.
|
The RM-210 is an extension unit for increasing the number of function keys of TOA's RM-200M, RM-200XF and RM-200X Remote Microphones.
| Specification |
|
|---|
| Current Consumption | 20mA max. (in terms of RM-200M's DC power input 75mA max. (interms of DC power inputs of RM-200X and RM-200XF) | | Connection | Connection to RM-200M, RM-200X or RM-200XF by way of dedicated Cable | | Number of Function | Keys 10 | | Function | When used to expand the RM-200M:
Selects and activates the Voice Announcement Board messages.
When used to expand the RM-200X and RM-200XF (PC software setting):
Emergency activation, emergency reset, BGM pattern selection, EV message activation, broadcast zone selection, monitor zone selection, chime activation, Talk switch activation, control output activation, input volume adjustment, zone volume adjustment, and failure output indication and reset. | | Finish | ABS resin, bluish gray (PANTON 538 or its equivalent) | | Dimensions | 110 (W) x 76.5 (H) x 215 (D)mm | | Weight | 350g | | Accessory | Extension cable x 1, Linkage bracket A x 1, Linkage bracket B x 1, Screw for linkage bracket x 12 |
|
Music Program Selector 1-6 with Relay
Toa - 100V installation |
Reviews
There are no reviews yet.