DRAWMER MC 3.1 Monitoring Controller

MC3.1 - Monitor Controller

Hear the music - not the equipment!

Building on the success of the MC2.1, the MC3.1 Monitor Controller is just as accurate and transparent and of the same build quality. It can still faithfully reproduce what has been recorded without colouring the sound, but comes with a much expanded feature set, including more inputs, better control, extended channel routing and a desk top \'wedge\' form factor.

Additions include a combined digital AES/SPDIF (24 bit/192kHz) input, giving a total of 5 individually switchable sources, including a front panel auxilary input with level control for the easy connection of your mp3 player, smartphone or tablet. Full cue mix facilities, with level control, provide separate source selection for main or cue outputs and the two headphone amplifiers, so the artist can listen to a completely different mix to the engineer, for example. A dedicated cue mix output is also available.

A secondary preset volume control on the front provides repeatable calibrated output level for the monitors, so that at the flick of a switch the engineer can hear the mix at the same predetermined volume, time after time, without having to meticulously adjust controls.

The MC3.1 incorporates three stereo balanced speaker outputs, plus a dedicated mono speaker/sub-woofer output each with individual left/right trims under the unit to provide complete control over level matching. Furthermore each can be switched individually and simultaneously and in any order. You can listen to multiple speakers with the same sub-woofer, or turn the sub-woofer off altogether.

Other improvements include additional mix checking capabilities, which now incorporate low, mid, high solo switches to hear how the lows bleed into the mid, or the stereo width of each, for example, and also the ability to swap the left and right channels. The talkback has been expanded to include an external mic in addition to the internal, and footswitch operation.

Can you trust the audio that your current monitor controller is providing? Is it colouring the sound? For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller.

• Ultra low noise and transparent circuit design.
• Source switches for both Main & Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI & 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel & 1 3.5mm Front Panel Aux.
• 3x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching.
• Timed relay protection on all speaker outputs to prevent power up/down bangs.
• Volume can be set via the Variable Front Panel Knob or a Preset Control. Each has parallelled custom quad pots for excellent channel matching and smooth feel.
• 2x Headphone Amplifiers with Individual Level Controls & Switching between Main & Cue Inputs so the Artist can listen to a Different Mix to the Engineer.
• Front Panel 3.5mm AUX Input & Level Control for connecting MP3 player, smartphone or tablet etc.
• Cue Level Control adjusts the volume for the Artist\'s Monitors.
• Built In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, a Mono Output Jack & Internal Routing to Headphone and Cue Outputs.
• Comprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L/R Mute; Phase Reverse and more, help check every aspect of your Mix & Provide Ultimate Control.
• Desktop \'wedge\' form factor.
• Kensington security slot (also called a K-Slot or Kensington lock).
• Rugged steel chasis and stylish brushed aluminium cover.

MC2.1 - Monitor Controller

It is imperative that what you record is exactly what you hear - this is the philosophy that is at the heart of the design of the MC2.1 Monitor Controller.

With the Drawmer MC2.1 Monitor Controller incorporated into your system you combine the clarity, fidelity and transparency of the highest quality monitoring circuit with the complexity of a host of mix checking features. It is versatile and intuitive, but above everything else, where the Drawmer MC2.1 excels is in it’s accuracy and ability to faithfully reproduce what has been recorded.

The MC2.1 incorporates four inputs with three stereo balanced speaker outputs, plus a dedicated mono speaker/sub-woofer output each with individual left/right trims under the unit to provide complete control over level matching. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. In addition, it has a host of mix checking features not often found on other controllers, such as individual left/right cut, as well as two seperate headphone amplifiers and a talkback facility, making the MC2.1 a true engineers tool.

Whether you’re mastering a cd/dvd, recording, checking a mix for balance and e.q, doing A/B comparisons, plus a mutlitude of other tasks, you’ll have spent weeks designing the perfect studio environment and a fortune on active speakers, dynamics processors, various microphone and preamplifier combinations as well as a whole room full other gear, one thing is for sure - a monitor controller is central to every recording setup and probably the most important element of the entire signal chain - providing the ‘reference’ listening signal that enables the user to achieve the optimal mic placements, the perfect balance and EQ etc. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller.

• Ultra low noise and transparent circuit design.
• Linear power supply with low hum toroidal transformer and internal voltage selector switch.
• 3 stereo balanced speaker outputs, plus a dedicated mono speaker/sub-woofer output. All have individual left & right trims under the unit to provide complete control over level matching.
• Timed relay protection on all speaker outputs to prevent power up/down bangs.
• Comprehensive mix checking facilities including Left/Right Cut, Phase Reverse, Mono, Dim, Mute.
• Parallelled custom quad pots on main and headphone level controls for excellent channel matching and smooth feel.
• Four inputs including balanced Neutrik XLR, balanced Neutrik XLR/JACK COMBI, and shared aux phono or 3.5mm jack.
• Two headphone amplifiers with individual level controls.
• Built in talk back microphone with level control, mono output jack and internal headphone routing.
• Rugged steel chasis and stylish brushed aluminium cover.
• Can be stacked and is rack mountable (with the MCB 2U mounting kit).
• Dimensions: L 272mm x W 215mm x H 81mm. Weight: 2.5kg

MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors. \"Fully passive\" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4\" TRS connectors, one with both unbalanced RCA and unbalanced 1/8\" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4\" TRS plus unbalanced 1/8\" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out! Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.
Features

• 2x mono balanced 1/4\" TRS input (input A)
• 2x mono unbalanced RCA input (input B)
• 1x stereo unbalanced 1/8\" mini jack input (input B)
• 2x mono balanced XLR output (output A)
• 2x mono balanced / unbalanced 1/4\" TRS output (output B)
• 1x stereo unbalanced 1/8\" mini jack output (output B)
• selected high quality potentiometer for passive volume control
• A/B input selection switch
• L/R switch to swap left & right audio channels
• independent A and B buttons to enable and disable the outputs
• mono downmix button (mixes left to right channel and right to left channel)
• mute button to mute output signal instantly

The Nano Patch+ really comes into its own when connected between your computer audio interface/soundcard master outputs and a pair of active (powered) monitor speakers. One of the benefits of passive volume attenuation is that you no longer have to control volumes with your softwareʼs master volume fader. Reducing levels from your software only reduces the audio bit depth. It is much more appropriate to keep your software masters at unity and attenuate the audio to your active monitors with a passive controller like the Nano Patch+. This way you can maintain maximum audio resolution and attenuate your monitoring volume with the confidence that the sonic integrity of your audio is not compromised.

No active circuitry, buffers, transistors, batteries, or power supply of any kind can interfere with the main passive output of the Nano Patch+. It simply delivers attenuated signal. Pure, simple transparent.

- Super compact 2 channel analog passive volume control
- Rotary volume attenuation control
- Mute button
- Completely transparent operation
- No power required
- 2 x combo inputs (balanced and unbalanced)
- 2 x TRS outputs (balanced and unbalanced)
- 1 x Mini jack I/O
- available in black and silver
- No signal conversion from unbalanced to balanced!

Bluetooth In.

Balanced Audio Out.

Turn any professional speaker into a Bluetooth speaker!

Kali Audio’s MV-BT lets you use your Bluetooth devices with professional speakers, mixers, controllers, and interfaces. Just pair your device by pressing the Kali logo on the front, and use your preferred balanced connector to connect to your system.

Press the Kali logo to pair.

Blue light indicates volume level.

Enjoy precise control over the volume level at your fingertips. Volume control is independent, so you can leave volume on your device at full.

Balanced Outputs

Connect to speakers, mixers, controllers, or interfaces with whatever cables you already use.

CMC2 - Compact Monitor Controller

COMPACT, ACCURATE & AFFORDABLE.

The CMC2 is a compact monitor controller that has been designed to provide the same top quality audio, transparency and accuracy of Drawmer's other monitor controllers, such as the MC2.1 and MC3.1, whilst retaining all the necessary features that the smaller project studio would require without the cost of the advanced features that would seldomly be used. 

Can you trust the audio that your current monitor controller is providing? Is it colouring the sound? For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller.

Accurate & Transparent

With the same Drawmer pedigree as the MC2.1, the CMC2 circuit is just as transparent and accurate. It's switches and paralleled custom-quad knobs have excellent channel matching, a smooth feel.

You hear exactly what you've recorded!

Multiple Connections

The CMC2 is very well connected: with 2 Stereo balanced jack inputs, plus a 3.5mm jack for your Smartphone/MP3 Player, with variable level control. It supports 2 sets of stereo monitors plus a sub-woofer, each with individual switches so you can activate them in any order, especially useful for A/B comparisons.

In addition, it has a professional quality headphone output with a separate amplifier and level control, that provide the same audio quality and mix checking as the CMC2 does through the speakers.

Key Mix check features such as Phase Reverse, Mono, Dim & Mute are also included, to enable you to examine the quality of your recordings with ease.

Compact

The CMC2 packs a lot of features into a small package. With a footprint of just 18x16cm and a very low profile the CMC2 won't hog your desk space like some other controllers do. And if your on the move it's small enough to pop into a bag to take anywhere.

Tough & Secure

Whilst being smart and stylish the rugged, all steel enclosure will withstand the knocks and bumps of the studio, and, coupled with the high quality components used, the CMC2 is built to last. In addition, a Kensington security slot provides protection from thieves.

• Ultra low noise and transparent circuit design.
• Source switches can be active in any combination. 3 Inputs in Total - Two on ¼” balanced jacks and One 3.5mm Front Panel Aux for your Smartphone/Mp3 Player.
• 2x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons.
• Timed relay protection on all speaker outputs to prevent power up/down bangs.
• A large volume knob incorporating a parallelled custom quad pot for excellent channel matching and smooth feel.
• A Headphone Amplifier with Individual Level Controls with easy access to the jack on the front.
• Front Panel 3.5mm AUX Input with Level Control for connecting MP3 player, smartphone or tablet etc.
• Mix Checking facilities Include Dim, Phase Reverse and Mono, as well as an easy access Mute switch.
• Kensington security slot (also called a K-Slot or Kensington lock).
• Very low profile desktop enclosure with a footprint of just 18x16cm.
• Stylish and Rugged Enclosure will withstand the knocks of the studio.