DRAWMER MC 3.1 Monitoring Controller

MC3.1 - Monitor Controller

Hear the music - not the equipment!

Building on the success of the MC2.1, the MC3.1 Monitor Controller is just as accurate and transparent and of the same build quality. It can still faithfully reproduce what has been recorded without colouring the sound, but comes with a much expanded feature set, including more inputs, better control, extended channel routing and a desk top \'wedge\' form factor.

Additions include a combined digital AES/SPDIF (24 bit/192kHz) input, giving a total of 5 individually switchable sources, including a front panel auxilary input with level control for the easy connection of your mp3 player, smartphone or tablet. Full cue mix facilities, with level control, provide separate source selection for main or cue outputs and the two headphone amplifiers, so the artist can listen to a completely different mix to the engineer, for example. A dedicated cue mix output is also available.

A secondary preset volume control on the front provides repeatable calibrated output level for the monitors, so that at the flick of a switch the engineer can hear the mix at the same predetermined volume, time after time, without having to meticulously adjust controls.

The MC3.1 incorporates three stereo balanced speaker outputs, plus a dedicated mono speaker/sub-woofer output each with individual left/right trims under the unit to provide complete control over level matching. Furthermore each can be switched individually and simultaneously and in any order. You can listen to multiple speakers with the same sub-woofer, or turn the sub-woofer off altogether.

Other improvements include additional mix checking capabilities, which now incorporate low, mid, high solo switches to hear how the lows bleed into the mid, or the stereo width of each, for example, and also the ability to swap the left and right channels. The talkback has been expanded to include an external mic in addition to the internal, and footswitch operation.

Can you trust the audio that your current monitor controller is providing? Is it colouring the sound? For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller.

• Ultra low noise and transparent circuit design.
• Source switches for both Main & Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI & 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel & 1 3.5mm Front Panel Aux.
• 3x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching.
• Timed relay protection on all speaker outputs to prevent power up/down bangs.
• Volume can be set via the Variable Front Panel Knob or a Preset Control. Each has parallelled custom quad pots for excellent channel matching and smooth feel.
• 2x Headphone Amplifiers with Individual Level Controls & Switching between Main & Cue Inputs so the Artist can listen to a Different Mix to the Engineer.
• Front Panel 3.5mm AUX Input & Level Control for connecting MP3 player, smartphone or tablet etc.
• Cue Level Control adjusts the volume for the Artist\'s Monitors.
• Built In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, a Mono Output Jack & Internal Routing to Headphone and Cue Outputs.
• Comprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L/R Mute; Phase Reverse and more, help check every aspect of your Mix & Provide Ultimate Control.
• Desktop \'wedge\' form factor.
• Kensington security slot (also called a K-Slot or Kensington lock).
• Rugged steel chasis and stylish brushed aluminium cover.

• 2 x Stereo Line Level Inputs (6.3 mm jack)
• 1 x Stereo Cue Mix Inputs (6.3 mm jack)
• Alt Inputs (3.5 mm mini jack, stereo RCA optical or coaxial S/PDIF inputs)

Bluetooth In.

Balanced Audio Out.

Turn any professional speaker into a Bluetooth speaker!

Kali Audio’s MV-BT lets you use your Bluetooth devices with professional speakers, mixers, controllers, and interfaces. Just pair your device by pressing the Kali logo on the front, and use your preferred balanced connector to connect to your system.

Press the Kali logo to pair.

Blue light indicates volume level.

Enjoy precise control over the volume level at your fingertips. Volume control is independent, so you can leave volume on your device at full.

Balanced Outputs

Connect to speakers, mixers, controllers, or interfaces with whatever cables you already use.

The M-Patch 2 is a compact desktop/rack-mountable sized passive volume attenuator and patch control device. Building on the success of the original M-Patch, the new M-Patch 2 is a feature packed passive problem solver for nearly all production environments. A great way to passively attenuate stereo signals from soundcards, CD players, pre-amps, and mixers, the M-Patch 2 front panel rotary controls allow precise level adjustments for two input sources. Featuring balanced combo XLR/TRS input jacks and XLR outputs, RCA & 3.5mm jack inputs, mono/stereo summing switch, Mute switch, A/B output pairs, and a built in stereo headphone amplifier, the M-Patch 2 has all bases covered.

- High quality? passive volume attenuator
- Great monitor switching device
- 2 x Input channels, 2 x Output channels
- Combo, RCA, & 3.5mm input connectors
- XLR outputs (balanced or unbalanced depends on the inputs selected)
- Mono/Stereo summing switch
- System mute function
- Built in headphone amplifier
- Quality components and rugged construction
- Desktop or Rack-mountable installation
- External 16Vac power supply (Supplied. Only required for operation of headphone amplifier)

The Behringer Monitor2USB is a monitor controller and USB audio interface designed for home and project studios. It pairs a large VCA control knob for your overall output level with the ability to select among three sets of active studio monitors, as well as two sets of headphones. With its USB jack, you can connect your computer straight to the device so that you may play music from your digital library, or you can mix straight from your DAW. Through its XLR inputs, you can route analog sound, balanced or unbalanced. 

The VCA amplifier provides several benefits. For example, it allows DC current to flow through the volume control, rather than the audio signal, and thus, bypasses any DC-related signal degradation. This also helps in making sure your stereo image doesn’t drift as you crank the volume knob; anyone who’s experienced in monitor controllers knows this can be a problem—a problem mitigated in the Monitor2USB. The volume knob itself is quite large, and this too serves a function: Such a large size allows for more precision as you turn the control, so you can achieve minutely specific level adjustments, which might be necessary as you switch from monitoring post-production projects to music mixes.

You can use its three sets of outputs in a variety of ways—for instance, you can hook up two monitors and a subwoofer, or three sets of monitors, one of which can serve as your dedicated mono check. On the headphone outputs, a crossfeed control mimics the stereo experience of sitting in front of your speakers by feeding a miniscule amount of signal from the right to the left and vice versa. Amongst other benefits, this feature helps mitigate ear fatigue over long sessions. Mono and Dim buttons are on hand to help you in the mixing process. Included with the Monitor2USB are a power cable and a full, complimentary copy of Tracktion—a DAW to help you in your recording, editing, and mixing journeys.

• Large volume knob with VCA control for precise level adjustments
• Built-in stereo USB audio interface
• 2 high-quality stereo inputs
• 3 independent monitor outputs to connect two stereo monitors and one mono monitor
• 2 headphone amplifiers with separate volume controls
• Crossfeed control emulates the stereo speaker panorama when listening through your headphones
• Convenient Mono and Dim functions
• Included eco-friendly power supply
• Designed and engineered in Germany

CMC2 - Compact Monitor Controller

COMPACT, ACCURATE & AFFORDABLE.

The CMC2 is a compact monitor controller that has been designed to provide the same top quality audio, transparency and accuracy of Drawmer's other monitor controllers, such as the MC2.1 and MC3.1, whilst retaining all the necessary features that the smaller project studio would require without the cost of the advanced features that would seldomly be used. 

Can you trust the audio that your current monitor controller is providing? Is it colouring the sound? For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller.

Accurate & Transparent

With the same Drawmer pedigree as the MC2.1, the CMC2 circuit is just as transparent and accurate. It's switches and paralleled custom-quad knobs have excellent channel matching, a smooth feel.

You hear exactly what you've recorded!

Multiple Connections

The CMC2 is very well connected: with 2 Stereo balanced jack inputs, plus a 3.5mm jack for your Smartphone/MP3 Player, with variable level control. It supports 2 sets of stereo monitors plus a sub-woofer, each with individual switches so you can activate them in any order, especially useful for A/B comparisons.

In addition, it has a professional quality headphone output with a separate amplifier and level control, that provide the same audio quality and mix checking as the CMC2 does through the speakers.

Key Mix check features such as Phase Reverse, Mono, Dim & Mute are also included, to enable you to examine the quality of your recordings with ease.

Compact

The CMC2 packs a lot of features into a small package. With a footprint of just 18x16cm and a very low profile the CMC2 won't hog your desk space like some other controllers do. And if your on the move it's small enough to pop into a bag to take anywhere.

Tough & Secure

Whilst being smart and stylish the rugged, all steel enclosure will withstand the knocks and bumps of the studio, and, coupled with the high quality components used, the CMC2 is built to last. In addition, a Kensington security slot provides protection from thieves.

• Ultra low noise and transparent circuit design.
• Source switches can be active in any combination. 3 Inputs in Total - Two on ¼” balanced jacks and One 3.5mm Front Panel Aux for your Smartphone/Mp3 Player.
• 2x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons.
• Timed relay protection on all speaker outputs to prevent power up/down bangs.
• A large volume knob incorporating a parallelled custom quad pot for excellent channel matching and smooth feel.
• A Headphone Amplifier with Individual Level Controls with easy access to the jack on the front.
• Front Panel 3.5mm AUX Input with Level Control for connecting MP3 player, smartphone or tablet etc.
• Mix Checking facilities Include Dim, Phase Reverse and Mono, as well as an easy access Mute switch.
• Kensington security slot (also called a K-Slot or Kensington lock).
• Very low profile desktop enclosure with a footprint of just 18x16cm.
• Stylish and Rugged Enclosure will withstand the knocks of the studio.