DSPPA MAG-1306 STEREO AMP 2 x 60w

STEREO ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2 x 60w ΤΗΣ ΣΕΙΡΑΣ MAG
BASS – TREBLE – VOLUME CONTROL
INPUTS: XLR + JACK 6.3mm
OUTPUTS:: 70V + 100V + 200V ( 3 wire mode )
ΕΝΔΕΙΚΤΙΚΑ LED: SIGNAL – CLIP – PROTECTION
ΔΙΑΣΤΑΣΕΙΣ: 48,2cm x 8.8cm x 43cm
ΒΑΡΟΣ: 18,5 kg

The new DA Series digital multi-channel amplifiers are the latest addition to the TOA line of industry-standard audio products for installed sound. The DA Series is ideal for multi-zone distributed speaker systems and professional sound applications.

Engineered with Class D technology, the new DA Series amplifiers operate at 85 percent efficiency and consume almost one-third less power than conventional analog amplifiers. The compact and lightweight (14.6 lbs.) single rack-space design and ultra-low heat dissipation allow designers to rack-mount up to five units without open space between units.

The first phase of the DA Series is comprised of two models; the high-impedance DA-250FH provides four 100 Volt output channels of 250 Watts. The low-impedance model DA-250F provides four channels of 250 Watts at four ohms or two channels of 500 Watts at eight ohms in bridged mode. Additional models are scheduled to be launched in 2007.

Equipped with an independent power supply for each channel, the new multi-channel amplifiers offer unmatched reliability and performance. Other features include recessed stepped attenuators for precise gain calibration, removable dust filters for easy maintenance, and optional isolation transformer.

• FEATURES :
• DA-250FH
• 4x 250W (100V)
• 2x 500W bridged mode (100V)
• Limiter and High pass filter

• 4x 250W (4 ohms) / 170W (8 ohms)2x 500W bridged mode (8 ohms)
• Limiter
• Class D design – 85% efficient!
• 30% lower power consumption than conventional amplifiers
• Compact, single rack-space design
• Stack up to 5 units without open spaces between units
• Lightweight (14.6 lbs.)
• Independent power supply for each channel
• Low heat dissipation
• Recessed stepped attenuators
• Comprehensive protection circuitry
• Removable dust filters for easy maintenance
• Optional 250W isolation transformer, model MT-250H (DA-250FH only)

XV Series - Intelligent Power  
 
Power Without Compromises.

The XV is designed for paging, music and alarm signals. Versatile,
dynamic and extremely rugged according to IEC286-3. For the
highest requirements in safety and quality.
Sequential power on, alive contacts and incorporated ground fault
detection - the XV is the solution under all conditions. Without the
need for additional equipment. For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers
in the XV series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 1600:  2x 800 W / 100 V
Class:  AB
Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans(temp. reg. variable speed)
Weight:   39 kg
Dimensions:  3 RU / 483 x 88 x 382 mm(19" x 3.5" x 15

- HIGH POWER, LOW DISTORTION

120W of RMS power with less than 1% THD.

- ADVANCED PROTECTION CIRCUITRY

Thermal and current overload protection, power-on delay and automatic idling circuitry for component and loudspeaker protection.

- BATTERY BACKUP

Can be powered by 24VDC battery for emergency backup and true portability.

- SLIM DESIGN, COMPACT SIZE

Streamlined design fits in a compact 3RU space.

The TOA VM-3000 Series is a highly cost-effective combined emergency voice alarm system and public address system. The VM-3000 Series is ideal for small and medium-sized applications, such as shopping centres, retail stores, nursing homes, schools and fitness clubs. It incorporates such emergency voice alarm functions as continuous speaker line monitoring and a built-in voice alarm. This easy to install and set-up, all-in-one system also offers PA broadcasting, paging and BGM functions that operate with uncompromisingly high audio quality to ensure consistently high intelligibility. The VM-3000 Series is digitally audio processed and controlled, with full digital audio mixing and a built-in high-quality electronic voice message feature. The system may be set up directly using the controls and LCD display on the front panel, also enabling easy operation of the system. Operational versatility is further enhanced by a dedicated software configuration capability for entering and updating settings via a PC.

• Easy installation in practically any 12V battery equipped car.
• Compact, rugged construction and front panel controls.
• Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
• Unidirectional dynamic microphone with talk switch.