Content |
- Portable version
- Compact subwoofer system
- 15 in woofer, optimally vented
General Application
Sub |
Portable |
Size Small/Medium |
Description A dedicated subwoofer system with a 15 in transducer in a vented rectangular enclosure. Available in a portable version ('R' with handles and NL4 connectors) or a permanent installation version ('P' with barrier strip input and mounting/suspension points).
|
Applications The SB150 provides high output sub bass response in a compact enclosure. Tuned enclosure venting extends LF response and minimizes driver strain. MX Series processors extend LF response and safeguard against cone excursion damage. Six year warranty. |
Physical |
System Configuration |
|
Subwoofer |
Product Group |
|
G, J |
LF Subsystem & Loading |
|
15 in, Vented |
Enclosure Material |
|
Exterior grade Baltic birch plywood |
Finish |
|
Wear resistant textured black paint |
Connector |
|
Two Neutrik NL4 Speakon |
Grille |
|
Powder coated perforated steel |
Dimensions (±0.13 in / ±3 mm) |
|
|
Height |
|
24.62 / 625 |
Width |
|
19.69 / 500 |
Depth |
|
19.00 / 483 |
Weights (pounds / kilograms) |
|
|
Net Weight |
|
76.0 / 34.5 |
Shipping Weight |
|
85.0 / 38.6 |
Performance |
Frequency Response |
|
|
±3 db |
|
33Hz to 300Hz (43Hz w/out CCEP) |
-10 dB |
|
29Hz (32Hz w/out CCEP) |
Recommended High-Pass Frequency |
|
25 |
Axial Sensitivity (dB SPL, 1 watt @ 1 m) |
|
|
Subbass |
|
95 |
Nominal Input Impedance (ohms) |
|
|
Subbass |
|
8 |
Power Handling (watts, continuous) |
|
|
Subbass |
|
1000 |
Calculated SPL Limit (referenced to 1 m) |
|
|
Subbass Peak |
|
131.0 |
Subbass Long Term |
|
125.0 | |
2x15''
800W/3200W Peak
133dB SPL max
4 Ohm
40Hz-125/250Hz
schwarz
|
The S8015 is an extremely compact, high output, band-pass subwoofer able to deliver tight and fast controlled bass response.
The new high power high sensitivity 15" woofer is the result of the latest RCF experience in sub-bass transducers and compact subwoofer design and manufacturing.
The band-pass configuration offers a significant acoustic impact resulting in a fast and controlled reproduction of the bass frequency range.
It is capable of a power of 1 kW RMS and able to deliver a MAx SPL in excess of 135 dB.
The cabinet's shape is unobtrusive rectangular low profile to be used under sofa or under limited height stages; the cabinet is constructed of Baltic Birch plywood and finished in a very resistant, textured black paint.
Rubber feet are also installed.
Applications
- Low Frequency Enhancement
- Under-sofa and under-stage constraints
- Music Enhancement
- Club-Bar Bass Enhancement
- Special Effects Reinforcement
- Entertainment Systems
- Live Music Reinforcement
- Small and Mid Club Sound Systems
- Infill Sub Bass Enhancement
- Auditoriums
- AV presentations
- Retail stores
Features |
---|
15" high-efficiency RCF Precision 4" voice-coil woofer with Inside/Outside Coil Technology | Bandpass woofer | 135 dB Max SPL | Response down to 43 Hz | Rectangular box enclosure |
Baltic Birch cabinet finished in a very resistant, textured black paint with rubber feet
Acoustical Specifications |
---|
Frequency Response -10 dB: | 43 Hz | ÷ 0.25 kHz | Max SPL @ 1m: | 135 dB | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1500 | |
TRANSDUCERS |
---|
Woofer: | 15" woofer, 4" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 900 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 310 / 12.20 mm/inch | | Width: | 900 / 35.43 mm/inch | | Depth: | 380 / 14.96 mm/inch | | Net Weight: | 23.4 / 51.58 Kg/Lbs |
|
|
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP55 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
SPECIFICATIONS
- Woofer: 15” AA PA15000, aluminum basket, 100mm Voicecoil
- Power Handling
450W continuous
900W program
1800W peak
- Recommended input power: 300-600 W @ 8Ohm
- Components: 15” Long excursion woofer
- Sensitivity (Half Space):
102dB SPL
135dB Peak
- Freq. response: (-3dB): 45Hz - 200Hz
- Freq. range(-10dB): 40Hz - 250Hz
- Impedance: 8Ohm
- Finish: black structure paint
- Protective Grid: powder coated steel grill with acoustic foam
- Connector: 2x NL4 Speaker
- Handle: 2 handles on the sides
- Pole mount: integrated (M20)
- Cabinet: plywood
- Dimensions (LxWxH): 430x550x550mm
- Weight: 26,5kg
FEATURE OVERVIEW
- Perfect harmonized components and case details
- High efficiency
- First class mechanical manufacture for day-to-day operations
- Equipped with optimized 15” LF driver
- Large optional accessory range
- Ideal for mobile and install applications
| LD Systems STINGER SUB 15 G3 Passive 15” Bass Reflex PA Speaker
This highly professional passive subwoofer is designed for absolute, long-term reliability. The Stinger® SUB 15 G3 provides 600 watts of continuous power; the maximum sound pressure level is 126 dB. Its specially developed 15" woofer also emits the deepest bass sounds with extremely powerful and clear contours. Designed as a real all-round workhorse, the strongly supported bass reflex cabinet is designed for horizontal and vertical use. It is made from robust 18 mm birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a thread insert for M20-extension tubes, stacking dimples and ergonomic handles. The Stinger® SUB 15 A G3 is an affordable solution for professional PA applications; extensive accessories support use on stage and in fixed installations.
Product type
PA subwoofer
Low/mid driver dimensions
15 "
Woofer voice coil (mm)
76.5 mm
Frequency response
40 - Crossover Hz
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
3
Cabinet material
18 mm Plywood
Cabinet construction
Bass Reflex
|
Reviews
There are no reviews yet.